Changes

==Over Speeding==

==Over Speeding==

When vehicle speed exceeds configured maximum speed value the scenario is activated, an event record is generated{{{text_dout| and digital output status is changed to 1 when configured}}}.<br />Scenario is active until detected speed decreases below the set parameter value. Configurable parameters:

When vehicle speed exceeds configured maximum speed value the scenario is activated, and an event record is generated{{{text_dout| and digital output status is changed to 1 when configured}}}.<br />Detected speed has to be greater than configured max speed +3% of configured max speed for the overspeeding event to start. For stop overspeeding event detected speed has to be lower than configured max speed -3% of configured max speed. Configurable parameters:

[[Image:OverSpeeding.gif|{{{general|size}}}|right]]  

[[Image:OverSpeeding.gif|{{{general|size}}}|right]]  

<br />

<br />

*Scenario settings – defines the priority of over speeding scenario: 0 – disabled, 1 – low, 2 – high, 3 – panic.

*Scenario settings – defines the priority of overspeeding scenario: 0 – disabled, 1 – low, 2 – high, 3 – panic.

*Max speed – it is the maximum allowed speed which can be reached. If speed exceeded configured value, then event will occur.  

*Max speed – it is the maximum allowed speed that can be reached. If the speed exceeded configured value, then the event will occur.  

*Output control – available scenario settings for module Digital output activation/deactivation

*Output control – available scenario settings for module Digital output activation/deactivation

*DOUT ON/OFF duration – a value in seconds, for how long {{{text_dout|DOUT1/DOUT2}}} should be active or inactive.

*DOUT ON/OFF duration – a value in seconds, for how long {{{text_dout|DOUT1/DOUT2}}} should be active or inactive.

*Send SMS to – GSM number to which SMS event will be sent.

*Send SMS to – the GSM number to which the SMS event will be sent.

*SMS text – SMS text.

*SMS text – SMS text.

<br />

<br />