0
edits
Changes
Template:Trip/Odometer settings (view source)
Revision as of 13:35, 24 March 2023
, 13:35, 24 March 2023Created page with "==Trip Settings== {| style="width: 100%" |right ''Trip'' section offers user to configure the ''Trip'' feature. ''Trip'' starts when Ignition acco..."
==Trip Settings==
{| style="width: 100%"
|[[Image:Trip_settings.jpg|right]]
''Trip'' section offers user to configure the ''Trip'' feature. ''Trip'' starts when Ignition according to ''Ignition source'' is ON and also 'Start Speed' is exceeded.
*<b>Mode</b> - Here the user can select Odometer distance counter mode.
**<code>Continuous</code> - ''Trip'' distance is going to be counted continuously (from ''Trip'' start to ''Trip'' end) and written to I/O ''Trip Odometer'' value field. When ''Trip'' is over and the next ''Trip'' begins, ''Trip Odometer'' value is reset to zero.<br/>
**<code>Between Records</code> - the distance is going to be counted between every record made. This value is written to I/O ''Trip Odometer'' value field and is reset to zero every new record until the ''Trip'' ends. If later all Odometer values are summed up manually, the distance driven during the whole duration of the ''Trip'' can be obtained.<br/>
*<b>Start Speed</b> - defines the minimum GPS speed in order to detect ''Trip'' start.
*<b>Ignition OFF Timeout</b> - is the timeout value to detect ''Trip'' end once the Ignition (configured ignition source) is OFF.<br/>
|}
[[Image:Fmb120_trip_mode.png|600px|none]]
==Odometer==
{| style="width: 100%"
|[[Image:{{{model|X}}}_Odometer.png|right]]
{{{cal_source|*<b>Calculation Source</b> - allows to choose Odometer calculation source.<br>
**<code>GNSS</code>
**{{{scnd_source|<code>CAN</code>}}} }}}
*<b>Odometer Value</b> - sets the starting total odometer value.
{| style="width: 100%"
|[[Image:Trip_settings.jpg|right]]
''Trip'' section offers user to configure the ''Trip'' feature. ''Trip'' starts when Ignition according to ''Ignition source'' is ON and also 'Start Speed' is exceeded.
*<b>Mode</b> - Here the user can select Odometer distance counter mode.
**<code>Continuous</code> - ''Trip'' distance is going to be counted continuously (from ''Trip'' start to ''Trip'' end) and written to I/O ''Trip Odometer'' value field. When ''Trip'' is over and the next ''Trip'' begins, ''Trip Odometer'' value is reset to zero.<br/>
**<code>Between Records</code> - the distance is going to be counted between every record made. This value is written to I/O ''Trip Odometer'' value field and is reset to zero every new record until the ''Trip'' ends. If later all Odometer values are summed up manually, the distance driven during the whole duration of the ''Trip'' can be obtained.<br/>
*<b>Start Speed</b> - defines the minimum GPS speed in order to detect ''Trip'' start.
*<b>Ignition OFF Timeout</b> - is the timeout value to detect ''Trip'' end once the Ignition (configured ignition source) is OFF.<br/>
|}
[[Image:Fmb120_trip_mode.png|600px|none]]
==Odometer==
{| style="width: 100%"
|[[Image:{{{model|X}}}_Odometer.png|right]]
{{{cal_source|*<b>Calculation Source</b> - allows to choose Odometer calculation source.<br>
**<code>GNSS</code>
**{{{scnd_source|<code>CAN</code>}}} }}}
*<b>Odometer Value</b> - sets the starting total odometer value.