Changes

429 bytes removed ,  11:37, 26 June 2023
Line 13: Line 13:  
*Camera might have a problem detecting SD card. Format microSD card using a FAT file system (FAT32 or exFAT). Try different cards. Try re-inserting the cards while the camera is turned on. Also, keep in mind that the smallest supported card is 16 GB.
 
*Camera might have a problem detecting SD card. Format microSD card using a FAT file system (FAT32 or exFAT). Try different cards. Try re-inserting the cards while the camera is turned on. Also, keep in mind that the smallest supported card is 16 GB.
 
*Physical camera restart. Disconnect the camera’s power supply and disconnect from the FMX125 device. Leave the camera for a few minutes like that and power it on but do not connect to the FMX125 for a few minutes. After some time, reconnect the device and check if the camera responds.
 
*Physical camera restart. Disconnect the camera’s power supply and disconnect from the FMX125 device. Leave the camera for a few minutes like that and power it on but do not connect to the FMX125 for a few minutes. After some time, reconnect the device and check if the camera responds.
*Try firmware update:
+
 
**Upload firmware to both SD cards. The firmware file has to be the exact name “JPEG_IPC_APP” name without any extensions.
+
**Check whether Codec8 Extended is enabled. Without Codec8 Extended, parameters of AVL ID 497, 499 '''WILL''' not be sent.
**Disconnect the camera from the FMX125 device.
  −
**Power the camera off.
  −
**Put the SD cards in.
  −
**Turn the power on but do not connect to the FMX125.
  −
**Wait for 3-5 minutes.
  −
**Turn off the power and reconnect to the FMX125 device.
  −
**Power on the camera with the FMX125 device.
  −
**Check whether Codec8 Extended is enabled. Without Codec8 Extended, parameters of AVL ID 497, 498, 499 '''WILL''' not be sent.
      
[[Image:Data_protocol.gif|300px]]
 
[[Image:Data_protocol.gif|300px]]