#Send following '''SMS commands''' to FMX00X device:
#Send following '''SMS commands''' to FMX00X device:
#*If you have set SMS login and password:<code>login pass log2sdfilterset 0;2;3;4;1</code>
#*If you have set SMS login and password:<code>login pass log2sdfilterset 0;2;3;4;1</code>
−
#*If SMS login and password are not set leave two spaces before command: <code><span style="color:#f8f9fa">aa</span>log2sdfilterset 0;2;3;4;1</code> <p>If command <code>log2sdfilterset</code> was sent correctly you should receive SMS Response:<code>Enabled Trace Filters:5</code> then you can restart the device.</p>
+
#*If SMS login and password are not set leave two spaces before command: <code><span style="color:#f8f9fa">aa</span>log2sdfilterset 0;2;3;4;1</code> <p>If command <code>log2sdfilterset</code> was sent correctly you should receive SMS Response:<code>Enabled Trace Filters:5</code></p>
−
#After the SMS response message CAN adapter log capturing has been started.
+
#After the SMS response message OBD log capturing will be started.
−
#Wait at least '''5 minutes''' to get enough CAN bus data and '''turn off''' vehicle engine.
+
#Wait at least '''5 minutes''' to get enough OBD data and '''turn off''' vehicle engine.