78
edits
Changes
no edit summary
|
|
|==Movement Settings==
|==Movement Settings==
[[Image:Accelerometer delay.gif|right]]
[[Image:Accelerometer settings.png|right]]
Here the user can set the movement start/stop delays. <br/>
Here the user can set the movement start/stop delays. <br/>
''For example'', if the '''''Movement Start Delay''''' is set to 1s and '''''Movement Stop Delay''''' to 60s, the movement will be detected after 1s of moving and defined as stopped after 60s when device stopped moving.
''For example'', if the '''''Movement Start Delay''''' is set to 1s and '''''Movement Stop Delay''''' to 60s, the movement will be detected after 1s of moving and defined as stopped after 60s when device stopped moving. Accelerometer Sensitivity in Sleep parameter defines how much movement device needs to experience to exit sleep mode. The lower the sensitivity - the more movement is required.
*<code>Minimal</code> – approximately 40% higher movement threshold comparing to Normal
*<code>Reduced</code> – approximately 20% higher movement threshold comparing to Normal
*<code>Normal</code> – recommended value for most users
*<code>Increased</code> – approximately 20% lower movement threshold comparing to Normal
*<code>Maximum</code> – approximately 40% lower movement threshold comparing to Normal
Changing Accelerometer Sensitivity in Sleep parameter might result in fake movement record or skipped movement events! Only change that if you experience problems with movement detection!
}}
}}
|}
|}