Changes

no edit summary
Line 212: Line 212:  
Static Navigation mode is a filter, which filters out track jumps when the object is stationary. If static navigation filter is disabled, it will apply no changes to GPS data. If static navigation filter is enabled, it will filter changes in GPS position if no movement (as defined by configured movement source) or ignition (as defined by configured ignition source) is detected. It allows filtering GPS jumps when the object is parked (not moving) and GPS position is still traced. <br />
 
Static Navigation mode is a filter, which filters out track jumps when the object is stationary. If static navigation filter is disabled, it will apply no changes to GPS data. If static navigation filter is enabled, it will filter changes in GPS position if no movement (as defined by configured movement source) or ignition (as defined by configured ignition source) is detected. It allows filtering GPS jumps when the object is parked (not moving) and GPS position is still traced. <br />
 
Additionally, user can choose which source (movement or ignition) is used to activate/deactivate static navigation.
 
Additionally, user can choose which source (movement or ignition) is used to activate/deactivate static navigation.
 +
}}
 +
|}
 +
 +
{|
 +
{{#if:{{{AT_no_show|}}}
 +
|
 +
|==Call Duration Limits==
 +
[[Image:Call duration limits.png|right]]
 +
These is two places for these settings. First one can be found in the SMS \ Calls Settings section. This setting applies to incoming and outgoing calls, except for the keyboard “Call” action and the Amber Alert feature.
 +
[[Image:Cal duration limit2.png|right]]
 +
 +
Second one can be found in the Keyboard section. These settings are only visible when the button action is Call. There is only one parameter per button, so the same parameter applies to all button presses.
 +
 
}}
 
}}
 
|}
 
|}