Line 2: |
Line 2: |
| === Page Description === | | === Page Description === |
| | | |
− | This page will describe EYE device functionalities, their flow and functionality supporting software versions. | + | This page will describe EYE device functionalities, their value flow and required hardware, firmware and software versions. |
| | | |
− | =EYE APP 1.2.2-89= | + | ==EYE APP 1.2.2-89== |
− | ==Search device with QR scan== | + | ===Search device with QR scan=== |
− | Now you can find devices with QR scan by pressing scan button [[File:EYE_APP_QR_BUTTON.png|frameless|25x25px]] and scanning device QR code. | + | '''Functionality''': Now you can find devices with QR scan by pressing scan button [[File:EYE_APP_QR_BUTTON.png|frameless|25x25px]] and scanning device QR code. |
− | <br><br>[[File:EYE_APP_QR_PRESS_BUTTON.png|frameless|250px]][[File:EYE_APP_QR_SCAN.png|frameless|250px]][[File:EYE_APP_QR_SCAN_EXAMPLE.png|frameless|250px]]
| |
| | | |
− | ==Customized Sensor Selection==
| + | '''Firmware''': 1.2.1.R.0+ |
− | Users can customize their device by selecting only the sensors they require. This allows users to specify which sensor information is read and advertised, ensuring power-efficient data collection and transmission.
| |
− | <br><br>[[File:EYE_APP_ONE_SENSOR_VIEW.png|frameless|250px]][[File:EYE_APP_CHOOSE_ONE_SENSORS.png|frameless|250px]][[File:EYE_APP_CHOOSE_FOUR_SENSORS.png|frameless|250px]][[File:EYE_APP_FOUR_SENSOR_VIEW.png|frameless|250px]]
| |
| | | |
− | ==Auto-Disconnect Timer==
| + | '''Value''': Easier device management |
− | To enhance user privacy and save energy, we've introduced an auto-disconnect feature. After 2 minutes of inactivity, users will be automatically disconnected from the device. Before disconnection, you will have the option to maintain the connection.
| |
− | <br><br>[[File:EYE_APP_TWO_MINUTE_WAIT.png|frameless|250px]][[File:EYE_APP_DISCONNECTED_AFTER_TWO_MINUTES.png|frameless|250px]][[File:EYE_APP_DISCONNECTED_WHILE_CONFIGURING.png|frameless|250px]]
| |
| | | |
− | ==Visible battery voltage==
| + | '''Flow:''' 1. Tap [[File:EYE_APP_QR_BUTTON.png|frameless|25x25px]] 2. scan the QR code engraved onto EYE device <br><br>[[File:EYE_APP_QR_PRESS_BUTTON.png|frameless|250px]][[File:EYE_APP_QR_SCAN.png|frameless|250px]][[File:EYE_APP_QR_SCAN_EXAMPLE.png|frameless|250px]] |
− | Eye App now provides a clear and convenient readout of the battery's voltage level, keeping users informed about their device's power status.
| |
− | <br><br>[[File:EYE_APP_VISIBLE_BATTERY_VOLTAGE.png|frameless|250px]] | |
| | | |
− | ==12 characters name== | + | ===Customized Sensor Selection=== |
− | Users can now assign names of up to 12 characters, enabling them to configure their device with a full MAC address as the name. | + | '''Functionality''': Users can disable sensors reading leaving only the sensors they require. |
− | <br><br>[[File:EYE APP 12 CHAR NAME.png|frameless|250px]]
| |
| | | |
− | ===<big>Functionalities</big>===
| + | '''Firmware''': 1.2.10.R.4+ |
| | | |
− | ====<u>Connecting to the device</u>====
| + | '''Value''': Data saving, battery life can be expanded by disabling accelerometer. |
− | {| class="nd-othertables_2" style="width:100%;"
| |
− | !SW version requirements
| |
− | ! colspan="5" | EYE APP: 1.2.0-60+
| |
− | Firmware: 1.2.1.R.0 to 1.2.8.R.2
| |
− | |-
| |
− | |Step No.
| |
− | |1
| |
− | |2
| |
− | |3
| |
− | |4
| |
− | |
| |
− | |-
| |
− | | Short step desc.
| |
− | |Tap the selected device to connect to it
| |
− | |Wait for connection
| |
− | |Enter PIN
| |
− | |Successfully connected
| |
− | |
| |
− | |-
| |
− | |Successful attempt at functionality visual
| |
− | |[[File:Screenshot 20230503 165303 EYE APP edited.jpg|left|thumb|400x400px|alt=|link=https://wiki.teltonika-gps.com/view/File:Screenshot_20230503_165303_EYE_APP_edited.jpg]]
| |
− | |[[File:Screenshot_20230503_165341_EYE_APP.jpg|alt=|left|400x400px|thumb|link=https://wiki.teltonika-gps.com/view/File:Screenshot_20230503_165341_EYE_APP.jpg]]
| |
− | |[[File:EYE app PIN enter screen.jpg|alt=|left|thumb|400x400px|link=https://wiki.teltonika-gps.com/view/File:EYE_app_PIN_enter_screen.jpg]]
| |
− | |[[File:Screenshot_20230503_165403_EYE_APP.jpg|alt=|left|400x400px|thumb|link=https://wiki.teltonika-gps.com/view/File:Screenshot_20230503_165403_EYE_APP.jpg]]
| |
− | |
| |
− | |-
| |
− | |Short step desc.
| |
− | |Tap the selected device to connect to it
| |
− | |Enter PIN incorrectly
| |
− | |Fail to enter PIN correctly 4 more times
| |
− | | Wait for 5 min timeout and enter PIN incorrectly
| |
− | |Fail to enter PIN correctly 4 more times
| |
− | |-
| |
− | |Additional desc.
| |
− | |
| |
− | |
| |
− | |Device is locked for 5 min but will allow to connect with PIN again after timeout
| |
− | |
| |
− | |Device is locked for 5 min but will allow to connect with PIN again after timeout, thus this is continued in infinite loop.
| |
− | |-
| |
− | | Failed attempt at functionality visual
| |
− | |[[File:Screenshot 20230503 165303 EYE APP edited.jpg|left|thumb|400x400px|link=https://wiki.teltonika-gps.com/view/File:Screenshot_20230503_165303_EYE_APP_edited.jpg]]
| |
− | |[[File:Screenshot 20230509 1518232 EYE APP.jpg|left|thumb|400x400px|link=https://wiki.teltonika-gps.com/view/File:Screenshot_20230509_1518232_EYE_APP.jpg]]
| |
− | |[[File:Screenshot 20230509 152802 EYE APP.jpg|left|thumb|400x400px|link=https://wiki.teltonika-gps.com/view/File:Screenshot_20230509_152802_EYE_APP.jpg]]
| |
− | |[[File:Screenshot 20230509 151823 EYE APP.jpg|left|thumb|400x400px|link=https://wiki.teltonika-gps.com/view/File:Screenshot_20230509_151823_EYE_APP.jpg]]
| |
− | |[[File:Screenshot 20230509 152802 EYE APP.jpg|left|thumb|400x400px|link=https://wiki.teltonika-gps.com/view/File:Screenshot_20230509_152802_EYE_APP.jpg]]
| |
− | |}
| |
| | | |
| + | '''Flow:''' 1. Connect to EYE device 2. Click "configure" 3. Expand Active sensors tab 4. Uncheck sensors you want to deactivate 4. Save your configuration.<br><br>[[File:EYE_APP_CHOOSE_ONE_SENSORS.png|frameless|250px]][[File:EYE_APP_ONE_SENSOR_VIEW.png|frameless|250px]][[File:EYE_APP_CHOOSE_FOUR_SENSORS.png|frameless|250px]][[File:EYE_APP_FOUR_SENSOR_VIEW.png|frameless|250px]] |
| | | |
| + | ===Auto-Disconnect Timer=== |
| + | '''Functionality''': After 2 minutes of inactivity, users will be automatically disconnected from the device. Before disconnection, you will have the option to maintain the connection. |
| | | |
| + | '''Firmware''': 1.2.10.R.4+ |
| | | |
| + | '''Value''': Enhanced privacy and energy saving. |
| | | |
| + | '''Flow:''' 1. Connect to EYE device 2. Do not perform any saving actions for 2 minutes.<br><br>[[File:EYE_APP_TWO_MINUTE_WAIT.png|frameless|250px]][[File:EYE_APP_DISCONNECTED_AFTER_TWO_MINUTES.png|frameless|250px]][[File:EYE_APP_DISCONNECTED_WHILE_CONFIGURING.png|frameless|250px]] |
| | | |
− | {| class="nd-othertables_2" style="width:100%;"
| + | ===Battery voltage display=== |
− | !SW version requirements
| + | '''Functionality''': Eye App now provides a clear and convenient readout of the battery's voltage level, keeping users informed about their device's power status. |
− | ! colspan="5" | EYE APP: 1.2.0-60+
| |
− | Firmware: 1.2.9.R.8+
| |
− | |-
| |
− | |Short step desc.
| |
− | |Tap the selected device to connect to it
| |
− | | Enter PIN incorrectly
| |
− | |Fail to enter PIN correctly 4 more times
| |
− | |Wait for 5 min timeout and enter PIN incorrectly
| |
− | |Fail to enter PIN correctly 4 more times
| |
− | |-
| |
− | |Additional desc.
| |
− | |
| |
− | |
| |
− | |Device is locked for 5 min but will allow to connect with PIN again after timeout
| |
− | |
| |
− | |Device is locked with PUK code now and will remain so until correct PUK is entered, see PUK code unlock.
| |
− | |-
| |
− | |Failed attempt at functionality visual
| |
− | |[[File:Screenshot 20230503 165303 EYE APP edited.jpg|left|thumb|400x400px|link=https://wiki.teltonika-gps.com/view/File:Screenshot_20230503_165303_EYE_APP_edited.jpg]]
| |
− | |[[File:Screenshot 20230509 1518232 EYE APP.jpg|left|thumb|400x400px|link=https://wiki.teltonika-gps.com/view/File:Screenshot_20230509_1518232_EYE_APP.jpg]]
| |
− | |[[File:Screenshot 20230509 152802 EYE APP.jpg|left|thumb|400x400px|link=https://wiki.teltonika-gps.com/view/File:Screenshot_20230509_152802_EYE_APP.jpg]]
| |
− | |[[File:Screenshot 20230509 151823 EYE APP.jpg|left|thumb|400x400px|link=https://wiki.teltonika-gps.com/view/File:Screenshot_20230509_151823_EYE_APP.jpg]]
| |
− | |[[File:Screenshot 20230509 175501 EYE APP PinnAttemptAfter5min.jpg|left|thumb|400x400px|link=https://wiki.teltonika-gps.com/view/File:Screenshot_20230509_175501_EYE_APP_PinnAttemptAfter5min.jpg]]
| |
− | |}
| |
| | | |
− | ===== PUK code unlock =====
| + | '''Firmware''': 1.2.1.R.0+ |
− | {| class="nd-othertables_2" style="width:60%;"
| |
− | !SW version requirements
| |
− | ! colspan="5" | EYE APP: 1.2.0-60+
| |
− | Firmware: 1.2.9.R.8+
| |
− | |-
| |
− | |Step No.
| |
− | |
| |
− | |-
| |
− | |Short step desc.
| |
− | |Tap the blocked device to connect to it
| |
− | |Enter PUK
| |
− | |Connected
| |
− | |-
| |
− | |Additional desc.
| |
− | |
| |
− | |
| |
− | |PIN automatically resets to default
| |
− | |-
| |
− | |Successful attempt at functionality visual
| |
− | |[[File:Screenshot 20230503 165303 EYE APP edited.jpg|left|thumb|400x400px|link=https://wiki.teltonika-gps.com/view/File:Screenshot_20230503_165303_EYE_APP_edited.jpg]]
| |
− | |[[File:PUK insert.jpg|left|thumb|400x400px|link=https://wiki.teltonika-gps.com/view/File:PUK_insert.jpg]]
| |
− | |[[File:Device screen 1.2.8 2.jpg|alt=|left|thumb|400x400px|link=https://wiki.teltonika-gps.com/view/File:Device_screen_1.2.8_2.jpg]]
| |
− | |-
| |
− | |Step desc.
| |
− | |Tap the selected device to connect to it
| |
− | |Enter PUK incorrectly
| |
− | | Fail to enter PIN correctly 4 more times
| |
− | |-
| |
− | |Additional desc.
| |
− | |
| |
− | |PUK is rejected and you can only go back or enter correct PUK
| |
− | |
| |
− | |-
| |
− | |Failed attempt at functionality visual
| |
− | |[[File:Screenshot 20230503 165303 EYE APP edited.jpg|left|thumb|400x400px|link=https://wiki.teltonika-gps.com/view/File:Screenshot_20230503_165303_EYE_APP_edited.jpg]]
| |
− | |[[File:Screenshot 20230512 163210 Gallery.jpg|left|thumb|400x400px|link=https://wiki.teltonika-gps.com/view/File:Screenshot_20230512_163210_Gallery.jpg]]
| |
− | |
| |
− | |}
| |
| | | |
| + | '''Value''': Keeping users informed about their device's power status. |
| | | |
− | ====<u>Hibernate mode:</u>====
| + | '''Flow:''' 1. Expand sensor card in the overview screen or connect to the device<br><br>[[File:EYE_APP_VISIBLE_BATTERY_VOLTAGE.png|frameless|250px]] |
| | | |
− | ===== Wake up: ===== | + | ===12 characters name=== |
− | {| class="nd-othertables_2" style="width:60%;"
| + | '''Functionality''': Users can now assign names of up to 12 characters, |
− | !SW version requirements
| |
− | ! colspan="5" |Firmware: 1.2.9.R.8+
| |
− | |-
| |
− | |Step No.
| |
− | |1-3
| |
− | |4
| |
− | |
| |
− | |-
| |
− | |Short step desc.
| |
− | |Attach magnet to sleeping device and wait for LED to blink.
| |
− | |Device starts broacasting
| |
− | |
| |
− | |-
| |
− | |Additional desc.
| |
− | |
| |
− | |Now device is discoverabled, scannable, connectable via BLE.
| |
− | |
| |
− | |-
| |
− | |Successful attempt at functionality visual
| |
− | |[[File:520746_Magnet_EYE_gif_v1.6-min.gif|alt=|left|240x240px|link=https://wiki.teltonika-gps.com/view/File:520746_Magnet_EYE_gif_v1.6-min.gif]]
| |
− | |
| |
− | |
| |
− | |}
| |
| | | |
− | ===== Send to sleep: ===== | + | '''Firmware''': 1.2.1.R.0+ |
− | {| class="nd-othertables_2" style="width:80%;"
| + | |
− | !SW version requirements
| + | '''Value''': A full MAC address can be used as the name. |
− | ! colspan="3" |EYE APP: 1.2.0-60+
| + | |
− | Firmware: 1.2.9.R.8+ | + | '''Flow:''' 1. Connect to EYE device 2. Click "configure" 3. Expand Name settings drop down 4. Enter desired name 4. Save your configuration.<br>[[File:EYE APP 12 CHAR NAME.png|frameless|250px]] |
− | |-
| + | |
− | |Step No.
| + | ==<big>EYE APP 1.2.0-63</big>== |
− | |1
| + | |
− | |2
| + | ===PIN code=== |
− | |3
| + | '''Functionality''': Eye App will time-out users on for 5 minutes after 5 unsuccessful PIN attempts |
− | |- | + | |
− | |Short step desc. | + | '''Firmware''': 1.2.1.R.0 to 1.2.8.R.2 |
− | |While connected and in overview tap "Send device to sleep" | + | |
− | |Confirm your selection | + | '''Value''': Enhanced privacy |
− | |Wait for EYE App to disconnect | + | |
− | |- | + | '''Flow:''' 1. Tap the selected device to connect to it 2. Enter PIN incorrectly, fail to enter PIN correctly 4 more times 3. Wait 5 minutes for timeout to end. |
− | |Additional desc. | + | |
− | | | + | [[File:Screenshot 20230503 165303 EYE APP edited.jpg|frameless|250px]][[File:Screenshot 20230509 1518232 EYE APP.jpg|frameless|250px]][[File:Screenshot 20230509 152802 EYE APP.jpg|frameless|250px]] |
− | |
| + | |
− | |Device is no longer connectable or findable until wake up step is performed.
| + | ===PUK code === |
− | |-
| + | '''Functionality''': Eye App will block users that fail PIN 10 times. |
− | |Successful attempt at functionality visual | + | |
− | |[[File:Device screen 1.2.8 2.jpg|left|thumb|400x400px|link=https://wiki.teltonika-gps.com/view/File:Device_screen_1.2.8_2.jpg]] | + | '''Firmware''': 1.2.9.R.8+ |
− | |[[File:Screenshot 20230509 173323 EYE APP.jpg|left|thumb|400x400px|link=https://wiki.teltonika-gps.com/view/File:Screenshot_20230509_173323_EYE_APP.jpg]]
| + | |
− | |[[File:Screenshot 20230512 164509 Gallery.jpg|left|thumb|400x400px|link=https://wiki.teltonika-gps.com/view/File:Screenshot_20230512_164509_Gallery.jpg]] | + | '''Value''': Enhanced privacy |
− | |}
| + | |
| + | '''Lock flow:''' 1. Tap the selected device to connect to it 2. Enter PIN incorrectly, fail to enter PIN correctly 4 more times 3. Wait 5 minutes for timeout to end. 4. Tap the selected device to connect to it 5. Enter PIN incorrectly, fail to enter PIN correctly 4 more times. 6. Requirement to enter PUK code will now appear. PUK code is provided by support. |
| + | |
| + | [[File:Screenshot 20230503 165303 EYE APP edited.jpg|frameless|200px]][[File:Screenshot 20230509 1518232 EYE APP.jpg|frameless|200px]][[File:Screenshot 20230509 152802 EYE APP.jpg|frameless|200px]][[File:Screenshot 20230509 151823 EYE APP.jpg|frameless|200px]][[File:Screenshot 20230509 175501 EYE APP PinnAttemptAfter5min.jpg|frameless|200px]] |
| + | |
| + | '''Unlock flow:''' 1. Tap the blocked device to connect to it 2. Enter PUK correctly 3. You will be connected, PIN will be reset to default |
| + | |
| + | [[File:Screenshot 20230503 165303 EYE APP edited.jpg|frameless|200px]][[File:Device screen 1.2.8 2.jpg|frameless|200px]] |
| + | [[File:PUK insert.jpg|frameless|200px]] |
| + | |
| + | ===Hibernate mode:=== |
| + | '''Functionality''': Eye App will allow users to send their devices back to hibernate mode |
| + | |
| + | '''Firmware''': 1.2.9.R.8+ |
| + | |
| + | Hardware: BTSID1 hibernate version or any BTSMP1 |
| + | |
| + | '''Value''': Battery saving |
| + | |
| + | '''Wake up flow:''' 1. Take magnet 2. Attach magnet to hibernating device 3. Wait for LED to blink. |
| + | |
| + | [[File:520746_Magnet_EYE_gif_v1.6-min.gif|alt=|left|240x240px|link=https://wiki.teltonika-gps.com/view/File:520746_Magnet_EYE_gif_v1.6-min.gif]]<br> |
| + | |
| + | |
| + | |
| + | |
| + | |
| + | |
| + | |
| + | '''Send to hibernate flow:''' 1. While connected and in overview tap "Send device to sleep". 2. Confirm your selection 3. Wait for EYE App to disconnect: |
| + | |
| + | [[File:Device screen 1.2.8 2.jpg|400x400px]][[File:Screenshot 20230509 173323 EYE APP.jpg|400x400px]][[File:Screenshot 20230512 164509 Gallery.jpg|400x400px]] |