3,895 bytes added
, Wednesday at 09:43
{{{EYE Beacon|==EYE Beacon==
[[File:EYE device.png|alt=|frameless|200x200px]]
BLE Beacon for traceability use cases, delivery tracking, monitoring of various movable objects in logistics (trailers, containers), agriculture (tractor attachments), and constructions (tools and inventory).
*[[BTSID1|BTSID1]]}}}
{{{EYE Sensor|==EYE Sensor==
[[File:EYE device.png|alt=|frameless|200x200px]]
Sensors data makes it especially suitable for cold chain refrigerator use cases. The built-in accelerometer can detect item movement or fall events. Magnet detection can be used for wireless open/close detection and notifications such as trailer door events, etc.
*[[BTSMP1|BTSMP1]]}}}
{{{LV-CAN200|==LV-CAN200==
[[File:LV-CAN200 08.png|alt=|frameless|200x200px]]
Access to CAN Bus data enables fleet operators to report on a wide range of information. LV-CAN200 adapter lets you read such essential CAN parameters like: fuel level, odometer, VIN number, fuel consumption, engine RPM, engine temperature and handbrake status. It helps to identify areas of improvement in the vehicle operation to drive down overheads and minimize environmental impact.
*[[LV-CAN200|LV-CAN200]]}}}
{{{ALL-CAN300|==ALL-CAN300==
[[File:ALL-CAN300 08.png|alt=|frameless|200x200px]]
Communication network can provide you with a wide range of data that can be used to reduce running costs, improve driver safety, streamline maintenance processes and support environmental responsibility.
*[[ALL-CAN300|ALL-CAN300]]}}}
{{{CAN-CONTROL|==CAN-CONTROL==
[[File:CAN-CONTROL 8.png|alt=|frameless|200x200px]]
The most widely used feature of CAN-CONTROL device is the possibility to lock/unlock car remotely and control its windows by using special SMS/GPRS commands. It makes CAN-CONTROL accessory a perfect solution for car sharing and many other use cases.
*[[ECAN01|ECAN01]]}}}
{{{Analog Fuel Sensor|==Analog Fuel Sensor==
[[File:Fuel Gauge.png|alt=|frameless|200x200px]]
Fuel tracking is one of the key challenges of fleet management. If the vehicle has a factory installed Analog Fuel Sensor, there is a solution that does not require any additional equipment - you can connect the device via AIN to read the fuel data straight from the sensor
*[[Analog Fuel Sensor|Analog Fuel Sensor]]}}}
{{{1-Wire Temperature Sensor|==1-Wire Temperature Sensor==
[[File:Types-Of-DS18B20-Temperature-Sensor.png|alt=|frameless|200x200px]]
Digital temperature sensor probe is based on Dallas DS18B20 sensor. An 8 meter cable length will not require any additional wires for even the most demanding installation places. These sensors operate in wide temperature range from -55°C to 125°C.
*[[1-Wire Temperature Sensors|1-Wire Temperature Sensors]]}}}
{{{1-Wire TTJ Temperature Sensor|==1-Wire TTJ Temperature Sensor==
[[File:Ttj foto.png|alt=|frameless|200x200px]]
The TTJ communicates over a 1-Wire bus that by definition requires only one data line (and ground) for communication with a central microprocessor. It has an operating temperature range of –55°C to +125°C and is accurate to ±0,5°C over the range of –10°C to +85°C.
*[[TTJ Temperature sensor|TTJ Temperature sensor]]}}}
{{{1-Wire iButton Reader|==1-Wire iButton Reader==
[[File:IButton reader.jpg|alt=|frameless|200x200px]]
One of the implemented features for fleet management devices is 1-Wire data protocol, which enables connection of iButton. The iButton device is perfect for any application where AVL data needs to travel along with a person or object identification.
* [[1-Wire iButton Reader|1-Wire iButton reader]]}}}
{{{1-Wire RFID Reader|==1-Wire RFID Reader==
[[File:RFID Reader.jpg|alt=|frameless|200x200px]]
The easy solution for implementing driver authentication using RFID based on DS1990A. Read is able to receive identification data wirelessly from passive transponders (cards, tags, etc.)
* [[1-Wire RFID Reader|1-Wire RFID reader]]}}}