543
edits
Changes
→AES128 BLE Encryption testing
If <b>BLE Encryption Key</b> is set, then device will communicate over BLE SPP (Serial Port Profile) with AES cipher mechanism. All incoming and outgoing data will be crypted with <b>AES128</b> algorithm with entered key. Connected to the other side device must have similar encryption method and algorithm <b>BLE Encryption Key</b> is a 16 byte hex coded string.
If <b>BLE Encryption Key</b> is set, then device will communicate over BLE SPP (Serial Port Profile) with AES cipher mechanism. All incoming and outgoing data will be crypted with <b>AES128</b> algorithm with entered key. Connected to the other side device must have similar encryption method and algorithm <b>BLE Encryption Key</b> is a 16 byte hex coded string.
<br><br>
<br><br>
#For <b>BLE Encryption</b> feature we need to download the [https://wiki.teltonika-mobility.com/wikibase/images/b/b8/Simple_BLE_Terminal.zip Simple BLE Terminal].<br>
#For <b>BLE Encryption</b> feature we need to download the [https://wiki.teltonika-gps.com/view/File:Simple_BLE_Terminal.zip Simple BLE Terminal].<br>
#Using the <b>Teltonika Configurator</b> in <b>Bluetooth®</b> section, make sure that <b>BT Radio</b> is Enabled (visible). Also in this section <b>Local Name</b> and <b>Local PIN</b> of the device can be seen.<br><br>[[Image:Confblue.png|700px|center]]<br><br>[[Image:Confaes128.png|400px|right]]
#Using the <b>Teltonika Configurator</b> in <b>Bluetooth®</b> section, make sure that <b>BT Radio</b> is Enabled (visible). Also in this section <b>Local Name</b> and <b>Local PIN</b> of the device can be seen.<br><br>[[Image:Confblue.png|700px|center]]<br><br>[[Image:Confaes128.png|400px|right]]
#Using <b>Teltonika Configurator</b> open <b>Bluetooth® 4.0</b> section and in <b>BLE Encryption Key</b> input field type in the <b>AES Key</b> that you would like to use. <b>BLE Encryption Key</b> have to be a 16 byte hex coded string. Example of <b>AES Key:</b> 00112233445566778899AABBCCDDEEFF.<br><br>[[Image:Scantft.jpg|300px|right]]<br><br>
#Using <b>Teltonika Configurator</b> open <b>Bluetooth® 4.0</b> section and in <b>BLE Encryption Key</b> input field type in the <b>AES Key</b> that you would like to use. <b>BLE Encryption Key</b> have to be a 16 byte hex coded string. Example of <b>AES Key:</b> 00112233445566778899AABBCCDDEEFF.<br><br>[[Image:Scantft.jpg|300px|right]]<br><br>
