Changes

* ''Sleep Settings'', where user can choose sleep mode;

* ''Sleep Settings'', where user can choose sleep mode;

* ''Ignition Source'', where user can choose an ignition source from digital input 1, power voltage{{{txt_fmb0|, engine RPM}}} and accelerometer. More than one ignition source can be selected at the same moment. User can select movement start and movement stop delay time - those parameters are used when accelerometer is selected as an ignition source. Ignition status is used in power management and the following functionalities: eco driving, excessive idling, fuel consumption, over speeding, towing and trip;

* ''Ignition Source'', where user can choose an ignition source from digital input 1, power voltage{{{txt_fmb0|, engine RPM}}} and accelerometer. More than one ignition source can be selected at the same moment. User can select movement start and movement stop delay time - those parameters are used when accelerometer is selected as an ignition source. Ignition status is used in power management and the following functionalities: eco driving, excessive idling, fuel consumption, over speeding, towing and trip;

* Object motion detection settings, where user can configure {{{txt_num|4}}} ways how {{{model|FMB1YX}}} detects movement and change its working mode (for more information refer to section [[FMB120 Data acquisition settings|Data acquisition settings]]). Other functionalities that depend on movement source are: power manager, fuel consumption and trip;

* Object motion detection settings, where user can configure {{{txt_num|4}}} ways how {{{model|FMB110}}} detects movement and change its working mode (for more information refer to section [[FMB120 Data acquisition settings|Data acquisition settings]]). Other functionalities that depend on movement source are: power manager, fuel consumption and trip;

* ''Static Navigation Settings'', where user can turn static navigation on or off. Additionally, user can choose which source (movement or ignition) is used to activate/deactivate static navigation;

* ''Static Navigation Settings'', where user can turn static navigation on or off. Additionally, user can choose which source (movement or ignition) is used to activate/deactivate static navigation;

* Records settings (no time synchronization), where user can enable or disable records when GPS is not available;

* Records settings (no time synchronization), where user can enable or disable records when GPS is not available;

* ''LED Indication'', where user can turn on or off the indication LEDs;

* ''LED Indication'', where user can turn on or off the indication LEDs;

* ''Analog Input Value Range'', where user can choose analog input range of 10 V or 30 V;}}}

* ''Analog Input Value Range'', where user can choose analog input range of 10 V or 30 V;}}}

* ''Time Synchronization'' settings, where user can choose which source(s) to use for {{{model|FMB1YX}}} time synchronization. User has a choice to: use only one synchronization source (<span style=color:#F6A83E>Disable (GPS only)</span>), allow synchronization from both the GNSS and NTP server (<span style=color:#F6A83E>NTP</span>), select synchronization through GNSS and GSM operator (<span style=color:#F6A83E>NITZ</span>) or from all three sources (when <span style=color:#F6A83E>NITZ+NTP</span> is selected). User can select which NTP server (it is possible to configure up to two servers) and what time period to use to resynchronize time.

* ''Time Synchronization'' settings, where user can choose which source(s) to use for {{{model|FMB110}}} time synchronization. User has a choice to: use only one synchronization source (<span style=color:#F6A83E>Disable (GPS only)</span>), allow synchronization from both the GNSS and NTP server (<span style=color:#F6A83E>NTP</span>), select synchronization through GNSS and GSM operator (<span style=color:#F6A83E>NITZ</span>) or from all three sources (when <span style=color:#F6A83E>NITZ+NTP</span> is selected). User can select which NTP server (it is possible to configure up to two servers) and what time period to use to resynchronize time.

{| class="wikitable"

{| class="wikitable"