Changes

===LV-CAN200 and ALL-CAN300 program number configuration via configurator===

===LV-CAN200 and ALL-CAN300 program number configuration via configurator===

----

----

LV-CAN200 and ALL-CAN300 program number can be set via configurator: ''LVCAN'' -> ''Program Number''. When program number is entered press <span style=color:#F6A83E>Save to device</span> button that saves the entered program number into {{{model|FMB1YX}}}.

{{{model|FMB1YX}}} shares the same USB port for connecting LV-CAN200 or ALL-CAN300 adapter and configuring device with PC.

{{{model|FMB1YX}}} can be configured using “SCAN” function or “Offline Configuration” (Figure 58)

SCAN function – is in use when {{{model|FMB1YX}}} is connected to CAN adapter (Figure 55), then wait 10s (Note, that car engine must be started), disconnect adapter from {{{model|FMB1YX}}} , and connect PC USB cable to {{{model|FMB1YX}}} Device (Figure 55). It is very important not to disconnect {{{model|FMB1YX}}} from power source during this operation, because if {{{model|FMB1YX}}} is reconnected all received CAN bus data will be lost. {{{model|FMB1YX}}} remembers received data from LV-CAN200 or ALL-CAN300 and at the end of the procedure when “SCAN” button is pressed, user will see all CAN data which is sent by adapter. Enable CAN data which needs send to server and save configuration pressing “Save” button.<br/>

To configure CAN data:<br/>

1. In car, connect LV-CAN200 or ALL-CAN300 to CAN bus and to the {{{model|FMB1YX}}} device , wait 10 seconds. Note, that car engine must be started.<br/>

2. Disconnect LV-CAN200 or ALL-CAN300 from {{{model|FMB1YX}}} , and connect PC USB cable to {{{model|FMB1YX}}} Device. It is very important not to disconnect {{{model|FMB1YX}}} from power source, because then all CAN data will be lost.

 

===Selecting LV-CAN200 and ALL-CAN300 program number manually===

===Selecting LV-CAN200 and ALL-CAN300 program number manually===

==Connecting FMB120 CAN adapters ALL-CAN300 and LV-CAN200==

==Connecting FMB120 CAN adapters ALL-CAN300 and LV-CAN200==

Connect LV-CAN200/ALL-CAN300 Pin 5 to {{{model|FMB1YX}}} Pin 12 (INPUT 5) or Pin 6 (INPUT 6) and connect light vehicle CAN adapter to other end of the cable.<br/>Connect CAN adapter Pin 1 and Pin 2 to car's CAN bus. CAN interface location of the supported light vehicle is described on mounting scheme.<br/>Connect car power supply lines to Pin 3 positive, Pin 4 negative.<br/>Pin 9 and 10 connections are optional depending on the exact car model.<br/>For exact pinout see the sticker of light vehicle CAN adapter.

* Connect USB Plug to {{{model|FMB1YX}}} device, connect Light Vehicles Can adapter to other end of the cable.

* Connect Light Vehicles Can adapter Pin 1 and Pin 2 to cars CAN bus. CAN interface location of the supported light vehicle is described on mounting scheme.

* Connect car power supply lines to Pin 3 positive, Pin 4 Negative.

*Pins 9,10 connection is optional it depends on exact car model.

*For exact pinout see sticker on Light Vehicles Can adapter.

 

[[Image:Fmb120_lv-can200_pinout.png|800px|none]]

[[Image:Fma120_lv-can200_pinout.png|800px|none]]

[[Image:Fmb120_all-can300_pinout.png|800px|none]]

[[Image:Fma120_all-can300_pinout.png|800px|none]]

{| class="wikitable" style="border-style: solid; border-width: 0px"

{| class="wikitable" style="border-style: solid; border-width: 0px"