Changes
Template:FMA1 Scenarios settings (view source)
Revision as of 16:06, 6 February 2019
, 16:06, 6 February 2019no edit summary
Five scenarios are available on {{{model|FM36YX}}} device. Green driving, Over speeding, Jamming detection, Immobilizer and iButton detect scenarios can be used to manage digital output 1 and digital output 2. A single digital output can be controlled by a few scenarios. However, it is not recommended to configure Immobilizer and other scenarios on the same digital output.
<br><br>
<br><br>
[[File:FMA1_Scenarios_configuration.png|987px]]
[[File:FMA1_Scenarios_configuration.png|987px]]
* [[{{{model|FM36YX}}}_Features_settings#Green_Driving|Green Driving]]
* [[{{{model|FM36YX}}}_Features_settings#Green_Driving|Green Driving]]
* [[{{{model|FM36YX}}}_Features_settings#Over_Speeding|Over Speeding]]
* [[{{{model|FM36YX}}}_Features_settings#Over_Speeding|Over Speeding]]
* [[{{{model|FM36YX}}}_Features_settings#Jamming_detection|Jamming detection]]
* [[{{{model|FM36YX}}}_Features_settings#Jamming_detection|Jamming detection]]
* [[{{{model|FM36YX}}}_Features_settings#Authorized_driving|Authorized driving]]
* [[{{{model|FM36YX}}}_Features_settings#Immobilizer |Immobilizer]]
* [[{{{model|FM36YX}}}_Features_settings#Immobilizer|Immobilizer]]
* [[{{{model|FM36YX}}}_Features_settings#iButton detect|iButton detect]]
<br><br>
<br><br>
===Green Driving===
===Green Driving===
----
----
Helps to prevent and inspect driver about harsh driving. Scenario continuously monitors: accelerating force, braking force and cornering angles. Warns driver if needed. DOUT1 or DOUT2 is controlled by scenario for user needs, for example buzzer or LED. <br>
Helps to inspect driver and prevent about harsh driving. Green driving source can be GPS or accelerometer. Scenario continuously monitors: accelerating force, braking force and cornering angles depending on build in accelerometer or depending on GPS. The device inspects driver if needed. Monitoring sensitivity is configurable. The scenario can control DOUT to alert the driver, with, for example, a buzzer or an LED.<br/>
To save 3G(in FM36M1 4G)/GPRS traffic Green Driving '''event''' will be '''generated (included into sent records) only''' when measured values are higher than those set in configuration, without additional I/O settings.<br>
To save GPRS traffic Green Driving event will be generated (included into sent records) only when {{{model|FM36YX}}} measured values are higher than those set in configuration, without additional I/O settings.
<br>
To prevent generating false events, harsh acceleration and harsh braking is monitored only when following conditions are fulfilled:
To prevent generating false events, harsh acceleration and harsh braking is monitored only when following conditions are fulfilled:
* Ignition is ON (DIN1 = 1)
* Ignition is ON (DIN1 = 1)
'''Digital output control:'''<br>
'''Digital output control:'''<br>
DOUTX (selected digital output) is ON, while vehicle speed exceeds parameter value. DOUTX is activated until current speed decreases below parameter value.<br>
DOUTX (selected digital output) is ON, while vehicle speed exceeds parameter value. DOUTX is activated until current speed decreases below parameter value.<br>
===Jamming detection===
===Jamming detection===
DOUTX (selected digital output) is ON, while modem is fixing radio frequency jamming. After jamming is over, DOUTX is deactivated.<br><br>
DOUTX (selected digital output) is ON, while modem is fixing radio frequency jamming. After jamming is over, DOUTX is deactivated.<br><br>
'''When pulse duration and timeout are set to 0:'''<br>
Pulse duration 0 - device will hold DOUT on all the time while jamming is detected.<br>
Timeout 0 - device will generate event instantly when jamming is detected.<br>
Bandwidth: -100 dBm to -500 dBm<br>
'''Digital output control:'''<br>
===Immobilizer===
===Immobilizer===
'''Digital output control:'''<br>
'''Digital output control:'''<br>
DOUTX (selected digital output) is continuously OFF. DOUTX turns ON if Ignition turns ON (configured Ignition Source = 1). After iButton ID is read (any iButton is attached), DOUTX turns OFF. After iButton identification, ignition can be turned OFF (configured Ignition Source = 0) for no longer than 30 seconds, otherwise immobilizer must be repeated.<br><br>
DOUTX (selected digital output) is continuously OFF. DOUTX turns ON if Ignition turns ON (configured Ignition Source = 1). After iButton ID is read (any iButton is attached), DOUTX turns OFF. After iButton identification, ignition can be turned OFF (configured Ignition Source = 0) for no longer than 30 seconds, otherwise immobilizer must be repeated.<br><br>
===iButton detect ===
----
If iButton is read, scenario activates configured DOUT for 500 ms. Second activation will be available only when iButton I/O element value goes back to 0, or another iButtob is read.