Changes

Template:FMB Accelerometer Features settings (view source)

Revision as of 14:36, 2 November 2018

479 bytes removed ,  14:36, 2 November 2018
→‎Crash Detection
Line 105: Line 105:  
* Every second with IO's, configured in I/O settings, under "Event only" parameter
 
* Every second with IO's, configured in I/O settings, under "Event only" parameter
 
* With frequency defined by ''Trace ODR (Hz)'' parameter <br/>
 
* With frequency defined by ''Trace ODR (Hz)'' parameter <br/>
−
 
+
* Each record will have accurate timestamps in milliseconds. <br/>
−
If ''Crash Trace'' is enabled {{{model|FMB1YX}}} will collect acceleration data every 40 miliseconds. Buffer is big enough to hold data for 5 seconds and in the event of Crash records will be generated from this buffer, following from these conditions:
  −
* Every second that acceleration changed more than 50mG, the data will be collected and records will be generated for a duration of 5 seconds after the event.
  −
* Every generated record will have accelerometer X Y Z values included.
  −
* Each record will have accurate timestamps in milliseconds.
      
[[Image:Fmb120_crash_trace.png|600px|none]]
 
[[Image:Fmb120_crash_trace.png|600px|none]]
Retrieved from "https://wiki.teltonika-gps.com/view/Special:MobileDiff/21199"

Navigation menu