2,414
edits
Changes
Created page with "__TOC__ Status info enables the user to monitor real time information of {{{model|FMU1YX}}}. Following fields are displayed: '''Device Info''', '''GNSS Info''', '''GSM Info''..."
__TOC__
Status info enables the user to monitor real time information of {{{model|FMU1YX}}}. Following fields are displayed: '''Device Info''', '''GNSS Info''', '''GSM Info''', '''I/O Info''', '''Maintenance''' and etc. User is able to export all of the information to '''.HTML''' file using [[File:Export_html.png|15px|link=]] icon which is at the top right corner of the '''Device Info''' area.
[[Image:FMU_status_screen-{{{model|FMU1YX}}}.jpg|1000px|none]]
==Device Info==
* Device Name
* Firmware version
* Last Start Time - last device start time.
* RTC Time - real time clock or current device time.
* Power Voltage (mV)
* Device IMEI
* External Storage (used/total) - {{{txt_memory|Internal Flash memory}}} free space.
* Device Uptime - device uptime from last start time.
{{{battery|* Battery Voltage (mV)
* Internal Battery Status - Charging/Not Charging}}}
==GNSS Info==
* GNSS status
** Module status - ON, [[{{{model|FMU125}}}_Sleep_modes#GPS_Sleep_mode|GPS Sleep]], [[{{{model|FMU125}}}_Sleep_modes#Deep_Sleep_mode|Deep Sleep]], [[{{{model|FMU125}}}_Sleep_modes#Online_Deep_Sleep_mode|Online Deep Sleep]], [[{{{model|FMU125}}}_Sleep_modes#Ultra_Deep_Sleep_mode|Ultra Deep Sleep]] mode.
** GNSS packets - the amount of GNSS packets device received from startup.
** Fix Status - Fix/No Fix.
** Fix Time - the last GNSS fix time.
* Satellites
** Visible - the amount and type of satellites that are visible.
** In Use - the amount of satellites used for location positioning.
* Location
** Latitude/Longitude - shows current device coordinates and if you press them opens '''Object location''' window with map.
** Altitude, Angle
** HDOP, PDOP
** Speed - current device speed.
==GSM Info==
* GSM status
** Modem Status
** SIM State - Ready/Unknown
** GPRS Status - Activated/Deactivated
** Actual Operator Code
** Signal Level
* GPRS traffic
** Sent Data - the amount of data that has been sent by device.
** Received Data - the amount of data that has been received by device.
** Total Traffic - Sent Data + Received Data
* Sockets information:
** Type - AVL Data Sending
** Socket - Closed or Server domain and port which is used when sending AVL Data via TCP/UDP.
* Records
** Sent Records count - how many records were sent to the server since last data reset.
** Last Record Send - date and time when the last record was sent.
** Last Server Response Time - date and time when the last server response was.
* SMS Count
** Received SMS - the amount of SMS messages device has received.
** Sent SMS - the amount of SMS responses that were sent from the device.
** SMS Count - Received SMS + Sent SMS
==I/O Info==
* I/O Data - shows the current values from all configurable I/O elements.
==FMS I/O Info==
* FMS I/O Data - shows the current values from FMS configurable I/O elements.
==Tachograph Data Info==
* Tachograph Data - shows the current values from Tachograph Data configurable I/O elements.
==Maintenance==
* Log/Dump
** Log - after button is pressed, the device starts log capturing for 10 minutes with configuration download. After this time device .log and configuration .cfg will be in compressed archive. <p>Archive name: <code>YYYY_MM_DD_HH_MM_SS_{{{model|FMU1YX}}}_IMEI_Log.zip</code><br>Default directory: <code>C:\Users\<username>\Documents</code></p>
** Dump - after button is pressed, the device starts to download .dmp logs and configuration .cfg from device in compressed archive. <p>Archive name: <code>YYYY_MM_DD_HH_MM_SS_{{{model|FMU1YX}}}_IMEI_Dump.zip</code><br>Default directory: <code>C:\Users\<username>\Documents</code><br>Dump files can be read only with special software. If needed, provide these files to your Teltonika sales manager or Teltonika Support team.</p>
** Open directory - this button appears near '''Log''' or '''Dump''' if one of these functions were used.
* Accelerometer - after button is pressed, the device starts to capture accelerometer values for 1 second.
* LLS calibration - in this section you can calculate calibration values of Analog LLS sensors for AVL server.
Default log capture time, accelerometer capture time and files directories can be changed by pressing [[File:Configurator-settings.png|25px|link=]] icon at the bottom right corner.
{{{txt_obd|==OBD Info==
Shows the main OBD parameters with current values when the device is connected to the vehicle via OBDII socket or using [[{{{model|FMU125}}}_Blue-tooth_settings#How_to_connect_OBD_II_Blue-tooth_Dongle_to_FMU_device|OBDII Blue-tooth Dongle]].}}}
{{{txt_can|==CAN Adapter Info==
Shows the parameters with current values (including program number and software version) from CAN adapter when the device is connected to LV-CAN200/ALL-CAN300/CAN-CONTROL.}}}
Status info enables the user to monitor real time information of {{{model|FMU1YX}}}. Following fields are displayed: '''Device Info''', '''GNSS Info''', '''GSM Info''', '''I/O Info''', '''Maintenance''' and etc. User is able to export all of the information to '''.HTML''' file using [[File:Export_html.png|15px|link=]] icon which is at the top right corner of the '''Device Info''' area.
[[Image:FMU_status_screen-{{{model|FMU1YX}}}.jpg|1000px|none]]
==Device Info==
* Device Name
* Firmware version
* Last Start Time - last device start time.
* RTC Time - real time clock or current device time.
* Power Voltage (mV)
* Device IMEI
* External Storage (used/total) - {{{txt_memory|Internal Flash memory}}} free space.
* Device Uptime - device uptime from last start time.
{{{battery|* Battery Voltage (mV)
* Internal Battery Status - Charging/Not Charging}}}
==GNSS Info==
* GNSS status
** Module status - ON, [[{{{model|FMU125}}}_Sleep_modes#GPS_Sleep_mode|GPS Sleep]], [[{{{model|FMU125}}}_Sleep_modes#Deep_Sleep_mode|Deep Sleep]], [[{{{model|FMU125}}}_Sleep_modes#Online_Deep_Sleep_mode|Online Deep Sleep]], [[{{{model|FMU125}}}_Sleep_modes#Ultra_Deep_Sleep_mode|Ultra Deep Sleep]] mode.
** GNSS packets - the amount of GNSS packets device received from startup.
** Fix Status - Fix/No Fix.
** Fix Time - the last GNSS fix time.
* Satellites
** Visible - the amount and type of satellites that are visible.
** In Use - the amount of satellites used for location positioning.
* Location
** Latitude/Longitude - shows current device coordinates and if you press them opens '''Object location''' window with map.
** Altitude, Angle
** HDOP, PDOP
** Speed - current device speed.
==GSM Info==
* GSM status
** Modem Status
** SIM State - Ready/Unknown
** GPRS Status - Activated/Deactivated
** Actual Operator Code
** Signal Level
* GPRS traffic
** Sent Data - the amount of data that has been sent by device.
** Received Data - the amount of data that has been received by device.
** Total Traffic - Sent Data + Received Data
* Sockets information:
** Type - AVL Data Sending
** Socket - Closed or Server domain and port which is used when sending AVL Data via TCP/UDP.
* Records
** Sent Records count - how many records were sent to the server since last data reset.
** Last Record Send - date and time when the last record was sent.
** Last Server Response Time - date and time when the last server response was.
* SMS Count
** Received SMS - the amount of SMS messages device has received.
** Sent SMS - the amount of SMS responses that were sent from the device.
** SMS Count - Received SMS + Sent SMS
==I/O Info==
* I/O Data - shows the current values from all configurable I/O elements.
==FMS I/O Info==
* FMS I/O Data - shows the current values from FMS configurable I/O elements.
==Tachograph Data Info==
* Tachograph Data - shows the current values from Tachograph Data configurable I/O elements.
==Maintenance==
* Log/Dump
** Log - after button is pressed, the device starts log capturing for 10 minutes with configuration download. After this time device .log and configuration .cfg will be in compressed archive. <p>Archive name: <code>YYYY_MM_DD_HH_MM_SS_{{{model|FMU1YX}}}_IMEI_Log.zip</code><br>Default directory: <code>C:\Users\<username>\Documents</code></p>
** Dump - after button is pressed, the device starts to download .dmp logs and configuration .cfg from device in compressed archive. <p>Archive name: <code>YYYY_MM_DD_HH_MM_SS_{{{model|FMU1YX}}}_IMEI_Dump.zip</code><br>Default directory: <code>C:\Users\<username>\Documents</code><br>Dump files can be read only with special software. If needed, provide these files to your Teltonika sales manager or Teltonika Support team.</p>
** Open directory - this button appears near '''Log''' or '''Dump''' if one of these functions were used.
* Accelerometer - after button is pressed, the device starts to capture accelerometer values for 1 second.
* LLS calibration - in this section you can calculate calibration values of Analog LLS sensors for AVL server.
Default log capture time, accelerometer capture time and files directories can be changed by pressing [[File:Configurator-settings.png|25px|link=]] icon at the bottom right corner.
{{{txt_obd|==OBD Info==
Shows the main OBD parameters with current values when the device is connected to the vehicle via OBDII socket or using [[{{{model|FMU125}}}_Blue-tooth_settings#How_to_connect_OBD_II_Blue-tooth_Dongle_to_FMU_device|OBDII Blue-tooth Dongle]].}}}
{{{txt_can|==CAN Adapter Info==
Shows the parameters with current values (including program number and software version) from CAN adapter when the device is connected to LV-CAN200/ALL-CAN300/CAN-CONTROL.}}}
