Changes

=='''How to insert {{{sim_type|Micro-}}}SIM card {{{battery|and connect the battery}}}'''==

=='''How to insert {{{sim_type|Micro-}}}SIM card {{{battery|and connect the battery}}}'''==

# Gently remove {{{model|FMU125}}} '''cover''' using '''plastic pry tool''' from both sides.<p><b>Note:</b> To properly open a new case please watch this [https://youtu.be/PBXVNXfRjg0 video].</p>

# Gently remove {{{model|FMU1YX}}} '''cover''' using '''plastic pry tool''' from both sides.

# Insert '''{{{sim_type|Micro-}}}SIM''' card as shown with '''PIN request disabled''' or read '''[[{{{model|FMU125}}} Security info|Security info]]''' how to enter it later in [[Teltonika Configurator]]. Make sure that {{{sim_type|Micro-}}}SIM card '''cut-off corner''' is pointing forward to slot. {{{dual_sim|'''SIM slot 1''' is closer to PCB, '''SIM slot 2''' is the upper one.}}}

# Insert '''{{{sim_type|Micro-}}}SIM''' card as shown with '''PIN request disabled''' or read {{{sim_pin|[[FMU120 Security info|'''Security info''']]}}} how to enter it later in Configurator. Make sure that {{{sim_type|Micro-}}}SIM card '''cut-off corner''' is pointing forward to slot. {{{dual_sim|'''SIM slot 1''' is closer to PCB, '''SIM slot 2''' is the upper one.}}}

{{{be_battery|# Connect '''battery''' as shown to device. Position the battery in place where it does not obstruct other components.

# Attach device '''cover''' back.

# After '''configuration''', see “'''[[{{{model|FMU125}}}_First_Start#PC Connection (Windows)|PC Connection (Windows)]]'''”, attach device '''cover''' back.}}}

# Device is ready to be connected.

 

[[Image:Fmb120_cover_1.png|280px]][[Image:Fmb120_cover_2.png|280px]][[Image:Fmb120_cover_3.png|280px]][[Image:Fmb120_cover_4.png|280px]]

{|

{|