Changes
Template:FMM640 Auto Geofence settings (view source)
Revision as of 16:00, 22 August 2019
, 16:00, 22 August 2019Created page with "AutoGeofence – the last known position after movement = off. If your car is being taken away – you can be notified. The shape and size of the geofence zones are configurab..."
AutoGeofence – the last known position after movement = off. If your car is being taken away – you can be notified. The shape and size of the geofence zones are configurable. There is a possibility to state whether entering in or out of the geofence triggers an asynchronous message. Auto Geofencing option can be configured by following parameters:
Priority – Priority of generated event, which will be applied to saved record.
Eventual Records - Scenario status will be (or not, if disabled) sent with each AVL
record. Generate Event:
On Entrace – Event generation on Geofence entrance.
On Exit – Event generation on Geofence exit.
On Both - Event generation on Geofence entrance or exit.
Activation Timeout – Time period before Geofence is activated after vehicle stops.
Radius - Radius of circle where in center of it is last coordinates of device when vehicle
engine was running. Deactivate By:
Ignition – if ignition becomes high it will drop AutoGeofenze Zone
iButton – if iButton is attached it will drop AutoGeofence Zone
Priority – Priority of generated event, which will be applied to saved record.
Eventual Records - Scenario status will be (or not, if disabled) sent with each AVL
record. Generate Event:
On Entrace – Event generation on Geofence entrance.
On Exit – Event generation on Geofence exit.
On Both - Event generation on Geofence entrance or exit.
Activation Timeout – Time period before Geofence is activated after vehicle stops.
Radius - Radius of circle where in center of it is last coordinates of device when vehicle
engine was running. Deactivate By:
Ignition – if ignition becomes high it will drop AutoGeofenze Zone
iButton – if iButton is attached it will drop AutoGeofence Zone
