1,581 bytes added
, 10:23, 17 September 2019
[[Image:Qsg_rut950_teltonika.PNG|centre]]
<b>{{{description|Advanced Plug and Track real-time tracking terminal with GNSS, GSM and Bluetooth connectivity}}}</b>{{{pic|[[Image:FMB001_00_demo.png|400px|right]]}}}
__TOC__
=='''How to insert Micro-SIM card and connect battery'''==
# Gently remove {{{model|FMB1YX}}} '''cover''' using '''plastic pry tool''' from both sides.
# Insert '''Micro-SIM''' card as shown with '''PIN request disabled''' or read '''{{{sim_pin|[[FMB001 Security info|Security info]]}}}''' how to enter it later in '''Configurator'''. Make sure that Micro-SIM card '''cut-off corner''' is pointing forward to slot.
# Connect battery as shown to device. Position the battery in place where it does '''not obstruct other components'''.
# Attach device '''cover''' back.
Device is ready to be connected.
{{{insert1|[[Image:Fmm001_cover_1.png|280px]]}}}{{{insert2|[[Image:Fmm0001_cover_2.png|280px]]}}}{{{insert3|[[Image:Fmm001_battery_1.png|280px]]}}}{{{insert4|[[Image:Fmm001_cover_3.png|280px]]}}}
{|
|-
| [[File:Alert.png|left|link=]] || <b>{{{sim_type|Micro-}}}SIM card insertion/removal must be performed when device is powered off – external voltage and battery are disconnected. Otherwise {{{sim_type|Micro-}}}SIM card might be damaged or device will not detect it.</b>
|}
=='''How to insert SD card into {{{model|FMB1YX}}}'''==
Insert SD card as shown.
<br/><b>NOTE:</b> SD cards are only used in devices manufactured until '''2018-04'''. Newer devices have internal flash memory.
{{{sd_card_insert|[[Image:Fmb010_sd_card_0.png|280px]]}}}