Changes

Line 100: Line 100:  
==DOUT Control via Call==
 
==DOUT Control via Call==
 
Activates DOUT on incoming call  <br/>
 
Activates DOUT on incoming call  <br/>
Scenario is activated and digital output is ON, when call is received from number which is in authorized numbers list.
+
The scenario is activated and digital output is ON when a call is received from a number which is in authorized numbers list.
 
Call control functionality: <br/>
 
Call control functionality: <br/>
* When FMB64 is configured to control DOUT1/DOUT2/DOUT3/DOUT4 device waits incoming call from configured secure number. If call is received FMB64 turns on DOUT1/DOUT2/ DOUT3/DOUT4 for user defined Duration timeout (s). If Duration timeout set to „0“(s), DOUT1/DOUT2/ DOUT3/DOUT4 will be OFF. <br/>
+
* When FMB64 is configured to control DOUT1/DOUT2/DOUT3/DOUT4 device waits for incoming call from the configured secure number. If the call is received FMB64 turns on DOUT1/DOUT2/ DOUT3/DOUT4 for user-defined Duration timeout (s). If the Duration timeout set to „0“(s), DOUT1/DOUT2/ DOUT3/DOUT4 will be OFF. <br/>
 
* DOUT1/ DOUT2/DOUT3/DOUT4 can be turned off by Duration timeout (s) or by digital input 1, digital input 2, digital input 3, or digital input 4 (DOUT deactivation settings). <br/>
 
* DOUT1/ DOUT2/DOUT3/DOUT4 can be turned off by Duration timeout (s) or by digital input 1, digital input 2, digital input 3, or digital input 4 (DOUT deactivation settings). <br/>
 
* DOUT1/DOUT2/DOUT3/DOUT4 can be turned off before Duration timeout (s) by selected DIN (DOUT deactivation settings).<br/>
 
* DOUT1/DOUT2/DOUT3/DOUT4 can be turned off before Duration timeout (s) by selected DIN (DOUT deactivation settings).<br/>
Line 108: Line 108:     
{{{pic_DOUTCONTROL|[[Image:FMB640_DOUT_control_via_CALL.png|300px|right]]}}}
 
{{{pic_DOUTCONTROL|[[Image:FMB640_DOUT_control_via_CALL.png|300px|right]]}}}
 +
 +
'''Confirmation about successful iButton identification with configured DOUT ON indication'''
 +
If DOUTX iButton read notification parameter is configured to control DOUTX and DOUTX is ON, then when new iButton is successfully read, DOUTX is turned OFF for 0,5 seconds and then turned back ON. By “new iButton” it is meant that the value read by (let’s say Driver’s) iButton reader is either different compared to what was read before or it’s the first time this iButton is read.
    
<br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/>
 
<br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/>