Line 1: |
Line 1: |
| __TOC__ | | __TOC__ |
| | | |
− | == Beacon Settings == | + | ==Beacon Settings== |
| <br> | | <br> |
| '''Beacon Detection''' | | '''Beacon Detection''' |
Line 11: |
Line 11: |
| '''Beacon Record'''<br> | | '''Beacon Record'''<br> |
| | | |
− | 0 (Eventual) – Disabled. (Record is sent after scan procedure is completed).<br> | + | 0 (Eventual) – Disabled. (Record is sent after scan procedure is completed). This parameter depends from the '''Bluetooth 4.0 Scan Settings'''.<br> |
| 1 (Periodic) – All beacons are sent to server. (Record will be saved accordint to configured period).<br> | | 1 (Periodic) – All beacons are sent to server. (Record will be saved accordint to configured period).<br> |
| | | |
Line 22: |
Line 22: |
| [[File:Beacon Settings.PNG|Beacon Settings]] | | [[File:Beacon Settings.PNG|Beacon Settings]] |
| | | |
− | == Beacon List == | + | |
| + | While selecting the '''Beacons Detection''' as '''All''', the device will detect all beacons which are located around the device. |
| + | |
| + | |
| + | Select '''Beacons Detection''' as the '''Configured''', in this case, the beacons will only be detected and send if they were added to the Beacons List. |
| + | |
| + | |
| + | The Beacons which was found will be shown in the Configurator and send as the '''AVL ID 314''' record data. |
| + | |
| + | ==Beacon List== |
| <br> | | <br> |
| List of authorized beacons. Eddystone and iBeacon protocols are supported*.<br> | | List of authorized beacons. Eddystone and iBeacon protocols are supported*.<br> |
Line 30: |
Line 39: |
| ''*''Beacon Ids can be entered the following way: Namspace:CompanyID, UUID:Major:Minor. Any of the ID parts | | ''*''Beacon Ids can be entered the following way: Namspace:CompanyID, UUID:Major:Minor. Any of the ID parts |
| can be omitted ex., Namespace:. UUID::, UUID::Minotr, etc | | can be omitted ex., Namespace:. UUID::, UUID::Minotr, etc |
| + | |
| + | |
| + | There is also possible to select Beacons Detection as the Configured, in this case, the beacons will only be detected and send if they were added to the Beacons List. |
| + | |
| + | Example for the configured beacons detection in the List. |
| + | |
| + | |
| + | Below there is provided the example of the List, while using the '''Beacons Detection source as Configured.''' The provided example is showing the configuration for the iBeacon and Eddy-stone. |
| + | |
| + | <br /> |
| [[Category:FMB120 Configuration]] | | [[Category:FMB120 Configuration]] |