633
edits
Changes
no edit summary
[[File:Mounting recomendations 1.jpg]]
[[File:Mounting recomendations 1.jpg]]
==Configurating beacon device==
==Configuration==
Devices work constantly and are ready to perform out of the box. Default basic Sensor settings are set to:
Devices work constantly and are ready to perform out of the box. Default basic Sensor settings are set to:
<br>• Transmitting at 2 dBm power.
<br>• Transmitting at 2 dBm power.
<br>
<br>
===Eye app===
'''With the application you will be able to scan for visible Teltonika EYE devices, check their statuses or connect for configuration or firmware update.'''
'''With the application you will be able to scan for visible Teltonika EYE devices, check their statuses or connect for configuration or firmware update.'''
<br>
<br>
|}
|}
===Teltonika configurator===
'''Bluetooth 4.0'''
<br>
Functionalities were reorganized and transferred to Bluetooth 4.0 configuration tab with additional horizontal tabs selection for specific settings:
<br>
* '''Global''' - Parameters responsible for device scanning ability like power and duratations.
* '''Beacon''' - Parameters to enable Beacon scanning scenarios.
<br>
'''Common settings'''
<br>
* '''Non Stop Scan''' - Enable Non Stop Scan feature, the device will try to scan for the sensors all the time if any of them are configured.
* '''Sensors and Beacons Update frequency''' - changes sensors temperature/humidity/battery voltage data update frequency. Minimum value: 30s, maximum value: 65535s. Recommended value 30.
* '''BLE Scan Duration''' - Sensors data reading time. Recommended value 30.
* '''Scan retries until error''' - Scan retries count, till start to show the value as Error '3000' - sensor disconnected. Recommended value 30.
* '''BT Power Level''' - Telematics device Bluetooth power level setting.
* '''BLE Broadcasting service ID''' - Telematics device can broadcast configured ID.
* ''' BLE connection control''' - Connection mode settings. If broadcasting ID is configured, parameter should be set to Prohibit.
<br>
[[File:Configurator GUI changes.png]]
<br>
==Protocol overwiev==
==Protocol overwiev==
