Changes

FMB225 First Start (view source)

Revision as of 15:19, 24 January 2022

542 bytes removed ,  15:19, 24 January 2022
no edit summary
Line 97: Line 97:  
<br />
 
<br />
 
[[File:FMB225_4000X4000_7.png|center|400px]]
 
[[File:FMB225_4000X4000_7.png|center|400px]]
−
<br />
  −
FMB225 is the device that have external GNSS antenna and internal GSM antenna.When placing GNSS antenna:
  −
<br />
  −
• Avoid easily reached places.
  −
<br />
  −
• Avoid placement under metal surfaces.
  −
<br />
  −
• GNSS antenna must be placed so its state is as horizontal as possible (if antenna is leant more than 30 degrees, it is considered incorrect mounting).
  −
<br />
  −
• GNSS antenna cable cannot be bent more than 80 degrees.
  −
<br />
  −
• GNSS antenna must be placed sticker facing down
  −
<br />
  −
[[File:FMB120_install3.jpg|center|400px]]
   
<br />
 
<br />
 
FMB1YX can be mounted under the plastic panel behind the front window, with the sticker direction to a window (sky). It is recommended to place FMB1YX behind dashboard as close to the window as possible. A good example of GNSS antenna placement is displayed in a picture below (area colored green).
 
FMB1YX can be mounted under the plastic panel behind the front window, with the sticker direction to a window (sky). It is recommended to place FMB1YX behind dashboard as close to the window as possible. A good example of GNSS antenna placement is displayed in a picture below (area colored green).
Line 116: Line 102:  
SIM card should be inserted in the module while the connector is plugged off (while module has no power).  
 
SIM card should be inserted in the module while the connector is plugged off (while module has no power).  
 
<br />
 
<br />
−
[[File:FMB120_install2.jpg|center|400px]]
+
[[File:FMB230_install2.jpg|center|400px]]
    
|FMB0_3_nominal=
 
|FMB0_3_nominal=
Retrieved from "https://wiki.teltonika-gps.com/view/Special:MobileDiff/70458"

Navigation menu