==How to connect Bluetooth Hands Free adapter to FMB device==
==How to connect Bluetooth Hands Free adapter to FMB device==
+
+
===Bluetooth settings configuration===
+
These are instructions how to easily prepare Bluetooth Hands Free device connection to FMB device. First we need to configure FMB device Bluetooth settings for proper connection to this hands-free unit. These are required steps:
• Turn on BT Radio by pressing „Enable (visible)“ (Figure 43 2 position). “Local name” (Figure 43 3 position) automatically will be “FMB120_last 7 imei digits”, you can leave it or type your own name.
+
* Set Security Mode (Figure 43 4 position) to “PIN only” or “None” (you could select “PIN + MAC list” or “MAC list only” security mode but in this case you need to type external device MAC address in “Authorized Devices MAC List” (Figure 43 7 position).
+
* Set connection mode to “Hands Free” (Figure 43 5 position).
+
* Set „External Name“ (Figure 43 6 position) as your Hands Free device name for proper device identification and connection to it. In this example Hands Free headset name is „DMH10“ but at least 2 characters are needed to recognize it and connect to it. For better and faster adapter identification in network you could enter a full device name. You could check your Hands Free adapter Bluetooth name by scanning nearby Bluetooth devices using mobile phone or computer with Bluetooth adapter.
+
* Go to “SMS \ Call Settings” in left menu and set “Incomming Call Action” to “Do Nothing” visible at Figure 44.
+
* After all these steps press „Save to device“ to save configuration.
+
* Now you can disconnect FMB device from a configurator.