==FMB120 ALL-CAN300 and LV-CAN200 parameters configuration==
==FMB120 ALL-CAN300 and LV-CAN200 parameters configuration==
+
+
Because FMB120 have LV-CAN200/ALL-CAN300 RX and TX in its own pinout device configuration can be performed via micro-USB when CAN adapter are connected in vehicle.<br/>When FMB120 are connected to configurator and at the same moment to LV-CAN200 or ALL-CAN300, in configurator LVCAN section user can see all information that is received from vehicle, that data are marked with green background color. Information in this section is automaticali refreshed. CAN bus data which can be read from your car is shown in “Light or ALL Vehicles Can adapter supported cars” document.<br/>The LVCAN I/O element can be configured like any other I/O element in FMB120 configurator.<br/>When using offline configuration metod user can select which CAN data will be red from LV-CAN200 or ALL-CAN300 and directly sent to server without connection to adapter. Please note that parameters depend on vehicle manufacturer and vehicle model. Please for further information check “Light and All Vehicles Can adapter supported cars” document.<br/>All information about I/O element parameters description is in section [[FMB120 I/O settings|I/O settings]].<br/>All LV-CAN200/ALL-CAN300 I/O parameters configuration settings are described in “FMB120 Protocols” document, except ALL-CAN300 bitmasks, they are described in the table below.