260
edits
Changes
Added the guide on how to decode RFID Card ID
<br>
<br>
==Decoding RFID Card ID==
RFID Card ID should be entered into the iButton List correctly to make this feature work correctly. Please refer to the guide below on how to enter an RFID Card ID.
1. RFID Card Reader should be connected to the device according to the [https://wiki.teltonika-gps.com/view/1-Wire_RFID_Reader#Installation/ wiring scheme]. <br>
2. The device should be connected to the PC, and the Teltonika Configurator should be opened. <br>
3. Open the "I/O" tab and find the iButton parameter in the list (ID 50390). <br>
4. Attach the RFID card to the reader. The value in the configurator should change. <br> [[File:IButton_ID_detection.png|border|frameless|500x500px]]<br>
5. In this example iButton value is 01437829000700CF. The value should be converted to the format compatible with the Authorization List according to the figure below: [[File:iButton_ID_decoding.png|border|frameless|400x400px]]<br>
6. Converted value (CF00070029784301) can be entered into the Authorization List. <br><br>
'''NOTE:''' On FMX6 devices this functionality might not work as expected, and there is no need to make any changes whenever receiving iButton/RFID value.
[[Category:Accessories]]
[[Category:Accessories]]
