Changes

no edit summary
Line 1: Line 1:  
===Introduction===
 
===Introduction===
Since 00.02.05 firmware version device supports Iridium devices (TSM232 įrašyt) which can send ''short burst data'' (SBD) to the server. This means that some data can be sent from the FM device to the server through satellites. From firmware version - '''01.02.22.Rev.02''', {{{device|}}} support for '''Iridium Edge''' is added. Iridium Edge features an all-in-one SBD module and antenna, with power supply. The plug-and-play satellite IoT terminal can be easily paired with {{{device|}}} device in order to expand their functionality to no GSM coverage zones.
+
Since 00.02.05 firmware version device supports Iridium devices - TSM-232 and Iridium Edge which can send ''short burst data'' (SBD) to the server. This means some data can be sent from the FM device to the server through satellites. From firmware version - '''01.02.22.Rev.02''', {{{device|}}} support for '''Iridium Edge''' is added. Iridium Edge features an all-in-one SBD module and antenna, with a power supply. The plug-and-play satellite IoT terminal can be easily paired with {{{device|}}} device in order to expand its functionality to no GSM coverage zones.
Current Iridium implementation offers ability to generate and send SBD records after set period after the GSM signal is lost. This ensures constant connectivity as Iridium network is available globally.
+
Current Iridium implementation offers the ability to generate and send SBD records after a set period after the GSM signal is lost. This ensures constant connectivity as the Iridium network is available globally.
    
===Connecting Iridium device to {{{device|}}}===
 
===Connecting Iridium device to {{{device|}}}===
In order to properly connect Iridium device to {{{device|}}}, Iridium has to be connect to the device via RS-232 - COM1 or COM2 (paminėt kur TX/RX jungt ir pridėt screenshot COM pinų). Additionally '''Pin No. 6''' - power control (reference in image below) must to be connected to one of the {{{device|}}} DOUTs (1/2/3/4), in order to allow device to power ON/OFF Iridium device on demand.
+
In order to properly connect the Iridium device to {{{device|}}}, Iridium has to be connected to the device via RS-232 - COM1 or COM2 (paminėt kur TX/RX jungt ir pridėt screenshot COM pinų). Additionally '''Pin No. 6''' - power control (reference in the image below) must be connected to one of the {{{device|}}} DOUTs (1/2/3/4), in order to allow the device to power ON/OFF Iridium device on demand.
    
Iridium Edge pinout:  
 
Iridium Edge pinout:  
Line 53: Line 53:  
|-
 
|-
 
| <br />8
 
| <br />8
| <br />Power detection
+
| <br />Power Detection
 
| <br />Output
 
| <br />Output
 
| <br />Active high then Iridium Edge is powered
 
| <br />Active high then Iridium Edge is powered
Line 68: Line 68:  
'''''Save/Send period''''' configures how long will FMB device wait after losing the signal to generate SBD packet. If the signal is not recovered, it will send it indefinitely (or till the SBD Upload limit is reached, if such is set).
 
'''''Save/Send period''''' configures how long will FMB device wait after losing the signal to generate SBD packet. If the signal is not recovered, it will send it indefinitely (or till the SBD Upload limit is reached, if such is set).
   −
'''''SBD Upload Limit''''' is configurable and resets every month. This option can ensure that no additional data is used so that no unexpected costs are experienced by the customer. Default value is 8000 (for 8KB plan). This option can be disabled by setting Upload limit to 0. Monthly data usage counter can be reset by using SMS/GPRS command - '''sbdlimitsreset'''.
+
'''''SBD Upload Limit''''' is configurable and resets every month. This option can ensure that no additional data is used so that no unexpected costs are experienced by the customer. The default value is 8000 (for 8KB plan). This option can be disabled by setting the Upload limit to 0. The monthly data usage counter can be reset by using the SMS/GPRS command - '''sbdlimitsreset'''.
    
'''''SBD IO source''''' configures IO source which can trigger SBD record saving.  9 elements can generate Alarm for SDB sending. These elements are:
 
'''''SBD IO source''''' configures IO source which can trigger SBD record saving.  9 elements can generate Alarm for SDB sending. These elements are:
Line 159: Line 159:  
[[File:FMB640 iridium1.png]]
 
[[File:FMB640 iridium1.png]]
 
<br></br>
 
<br></br>
In scenario shown in above picture when panic record is made (generated by ''Digital Input 1'' or ''Digital Input 2'') internal 90 seconds timer will start to tick and if in that timeout device will not send record through GPRS network it will be sent with Iridium satellites.
+
In the scenario shown in the above picture when panic record is made (generated by ''Digital Input 1'' or ''Digital Input 2'') internal 90 seconds timer will start to tick and if in that timeout device will not send the record through GPRS network it will be sent with Iridium satellites.
 
===SDB record structure===
 
===SDB record structure===
SDB Record which will be sent through Iridium satellites network will be different than the regular record. It will contain: 4 bytes timestamp, 3 bytes longitude, 3 bytes latitude, 1 byte record generation info, 1 byte DIN,DOUT info, 1 byte Speed value.
+
SDB Record which will be sent through the Iridium satellites network will be different than the regular record. It will contain 4 bytes timestamp, 3 bytes longitude, 3 bytes latitude, 1 byte record generation info, 1 byte DIN,DOUT info, 1 byte Speed value.
    
{| class="nd-othertables_2" style="width:100%;"
 
{| class="nd-othertables_2" style="width:100%;"
Line 184: Line 184:  
'''''Timestamp''''' - Indicates when record was generated.
 
'''''Timestamp''''' - Indicates when record was generated.
 
<br></br>
 
<br></br>
'''''Longitude''''' - In this packet is encoded in 3 bytes data. Server which gets this data should divide result from 46603,375 and subtract 180 in order to get actual longitude value. This coefficient is got in following way: 16777215(maximum 3 bytes value) divided from 360 (maximum longitude value then 180 is added). This calculation is used to fit negative and positive values to 3 bytes width variable.
+
'''''Longitude''''' - In this packet is encoded in 3 bytes data. The server that gets this data should divide the result from 46603,375 and subtract 180 to get the actual longitude value. This coefficient is got in the following way: 16777215(maximum 3 bytes value) divided by 360 (maximum longitude value then 180 is added). This calculation is used to fit negative and positive values to 3 bytes width variable.
 
<br></br>
 
<br></br>
'''''Latitude''''' - Is calculated in same way as longitude but since latitude maximum value is two times smaller than longitude it can produce a bit more accurate data. Coefficient for latitude is 93206,75. This coefficient is got in following way: 16777215(maximum 3 bytes value) divided from 180 (maximum latitude value then 90 is added). This calculation is used to fit negative and positive values to 3 bytes width variable.
+
'''''Latitude''''' - Is calculated in the same way as longitude but since latitude maximum value is two times smaller than longitude it can produce a bit more accurate data. The coefficient for latitude is 93206,75. This coefficient is got in the following way: 16777215(maximum 3 bytes value) divided by 180 (maximum latitude value then 90 is added). This calculation is used to fit negative and positive values to 3 bytes width variable.
 
<br></br>
 
<br></br>
 
'''''SBD AVL ID and flags''''' – Custom ID that will indicate what caused the record to be generated (final ID will (as only periodic records are generated, ID is not used)).
 
'''''SBD AVL ID and flags''''' – Custom ID that will indicate what caused the record to be generated (final ID will (as only periodic records are generated, ID is not used)).
Line 194: Line 194:  
'''''Reserved''''' - Not used.
 
'''''Reserved''''' - Not used.
 
<br></br>
 
<br></br>
'''''Speed''''' – Indicates the speed of the vehicle if configured. If not (or in case of no GPS) – will display 255.
+
'''''Speed''''' – Indicates the speed of the vehicle if configured. If not (or in case of no GPS) – it will display 255.

Navigation menu