0
edits
Changes
no edit summary
__TOC__
==Device configuration==
==Device configuration==
On this page, you will be able to find information about the gerenal configuration and connection of DSM camera with the FMX640 tracking device. Information about different parameters required to set up the DSM camera are also described in this page. To start off, firstly follow the instructions on how to connect DSM camera with the FMX640 device, once the camera is connected to the tracking device, connect FMX640 to computer and open the required configurator application. Select your device and follow instructions below:
*It is necessary to change '''Data Protocol''' to [[Codec#Codec_8_Extended | Codec 8 Extended]] in the "System" tab.
*It is necessary to change '''Data Protocol''' to [[Codec#Codec_8_Extended | Codec 8 Extended]] in the "System" tab.
[[File:Dsm file-upload.jpg|300px]]
[[File:Dsm file-upload.jpg|300px]]
*Domain - Domain name where the image/audio files should be sent
This section is meant for image and audio sending only, parameter data sending if configured, is done through GPRS settings tab where most of data is configured for sending.
*Domain - Domain name where the image/audio files should be sent, can be a website or IP address (e.g. 123.123.12.198).
*Port - Port number which is assigned to a domain name and works as an entry point to the server.
*Port - Port number which is assigned to a domain name and works as an entry point to the server.
*Periodic image sending - Periodic image sending can be sent in order to send images to the server at a configurable time period.
*Periodic image sending - Periodic image sending can be sent in order to send images to the server at a configurable time period.
