Changes

   

   

There are three protocols, with the following packets:

There are three protocols, with the following packets:

*1.iBeacon + EYE Sensors*

 

*2.Eddystone + EYE Sensors*

'''1.iBeacon + EYE Sensors'''

For *first* and *second* protocols only iBeacon/Eddystone packet is broadcasted and will be seen by both active and passive scans, to see the EYE Sensors packet you need to use an active scan.

 

'''2.Eddystone + EYE Sensors'''

 

For '''iBeacon + EYE Sensors''' and '''Eddystone + EYE Sensors''' protocols only iBeacon/Eddystone packet is broadcasted and will be seen by both active and passive scans, to see the EYE Sensors packet you need to use an active scan.

In other words in an environment where no BLE devices are scanning with an active scan or in case when there are no scanning devices at all, only the iBeacon/Eddystone packet will be sent by the BTS device to conserve energy.

In other words in an environment where no BLE devices are scanning with an active scan or in case when there are no scanning devices at all, only the iBeacon/Eddystone packet will be sent by the BTS device to conserve energy.

*3. EYE Sensors*

 

With third protocol, the EYE Sensor packet becomes broadcast.

'''3. EYE Sensors'''

 

With '''EYE Sensors''' protocol, the EYE Sensor packet becomes broadcast.

In other words, in an environment where no BLE devices are scanning with an active scan or in case when there are no scanning devices at all EYE Sensors packet will be sent by the BTS device.

In other words, in an environment where no BLE devices are scanning with an active scan or in case when there are no scanning devices at all EYE Sensors packet will be sent by the BTS device.