2,414
edits
Changes
FMB Accelerometer Features settings(03.28.XX) (view source)
Revision as of 19:51, 19 January 2023
, 19:51, 19 January 2023→Accelerometer Calibration
|-
|-
|auto_calibrate:status||Yes||Request calibration status and calibration task status
|auto_calibrate:status||Yes||Request calibration status and calibration task status
|-
|auto_calibrate:tryforever||Yes||Enable Forever Mode – calibration status will be sent until reset
|}
|}
</center>
</center>
2.3. GPS speed is more than 5 km/h.<br>
2.3. GPS speed is more than 5 km/h.<br>
2.4. GPS heading is equal to last GPS heading (+/-1 degree) at GPS sample rate 1Hz.<br>
2.4. GPS heading is equal to last GPS heading (+/-1 degree) at GPS sample rate 1Hz.<br>
2.5. GPS speed more then 5 km/h from last sample (accelerating).<br>
2.5. GPS speed more than 5 km/h from last sample (accelerating).<br>
Once both buffers are full, auto calibration is attempted. If calibrated values pass calibration quality threshold, calculated calibration is written to flash as current calibration – device is calibrated. <br>
Once both buffers are full, auto calibration is attempted. If calibrated values pass calibration quality threshold, calculated calibration is written to flash as current calibration – device is calibrated. <br>
Note: If GPS fix is lost or ignition is turned off, buffers’ data is dumped and must be gathered from 0 again.<br>
Note: If GPS fix is lost or ignition is turned off, buffers’ data is dumped and must be gathered from 0 again.<br>
