Changes

no edit summary
Line 94: Line 94:  
==Time Synchronization==
 
==Time Synchronization==
 
''Time Synchronization settings'' will be use to set how device time will be re-synchronize.
 
''Time Synchronization settings'' will be use to set how device time will be re-synchronize.
===New Time Synchronization method implementation===
   
------------------
 
------------------
 
[[image:Timesyncflowchart.png|right|600px]]
 
[[image:Timesyncflowchart.png|right|600px]]
From 03.25.14 firmware the new time synchronization works by waiting a minute on startup to acquire fix and consequently synchronizes the time via GNSS. <br> This state checks the difference between RTC and GNSS times every second. If the difference of at least 3 seconds persists to be for 5 seconds, the firmware triggers a re-synchronization procedure by GNSS. <br> After that, the time difference is still calculated, but the difference is expected to persist for at least 5 minutes to trigger a GNSS time re-synchronization.<br>
+
Time synchronization works by waiting a minute on startup to acquire fix and consequently synchronizes the time via GNSS. <br> This state checks the difference between RTC and GNSS times every second. If the difference of at least 3 seconds persists to be for 5 seconds, the firmware triggers a re-synchronization procedure by GNSS. <br> After that, the time difference is still calculated, but the difference is expected to persist for at least 5 minutes to trigger a GNSS time re-synchronization.<br>
 
In the case that there is no fix or it is lost during the syncing by GNSS state, the firmware goes to the state of syncing by NTP. Entering the state of NTP syncing, the firmware immediately attempts to synchronize the time by triggering NTP and later on, does this periodically every time the configured NTP re-synchronization time is reached (if the re-synchronization time is set to 0 – no NTP sync is performed at all). Time synchronization by NITZ can occur at any time.  
 
In the case that there is no fix or it is lost during the syncing by GNSS state, the firmware goes to the state of syncing by NTP. Entering the state of NTP syncing, the firmware immediately attempts to synchronize the time by triggering NTP and later on, does this periodically every time the configured NTP re-synchronization time is reached (if the re-synchronization time is set to 0 – no NTP sync is performed at all). Time synchronization by NITZ can occur at any time.  
 
<br></br><br></br><br></br><br></br><br></br><br></br><br></br><br></br><br></br><br></br><br></br><br></br><br></br>
 
<br></br><br></br><br></br><br></br><br></br><br></br><br></br><br></br><br></br><br></br><br></br><br></br><br></br>

Navigation menu