558
edits
Changes
no edit summary
4. Device goes to sleep for 28800 s.<br>
4. Device goes to sleep for 28800 s.<br>
5. If movement is detected for 20 seconds device switches to On Move scenario.<br>
5. If movement is detected for 20 seconds device switches to On Move scenario.<br>
5.1 If <b>On Move event record</b> is <b>Disabled</b> no record is generated.<br>
5.2 If <b>On Move event record</b> is <b>Enabled</b> and valid fix <b>is present</b>, device sends last known good position.<br>
5.3 If <b>On Move event record</b> is <b>Enabled</b> and valid fix is <b>not present</b>, device will wake up, obtain and send new position (GPS fix up to 3 minutes, record saved, send via GPRS up to 2 minutes)<br>
6. Device wakes up after 28800 seconds if device was not stationary for 600 seconds, see step 7. If device was stationary for 600 seconds, see step 10<br>
6. Device wakes up after 28800 seconds if device was not stationary for 600 seconds, see step 7. If device was stationary for 600 seconds, see step 10<br>
7. Device is looking for GPS Fix (can take up to 3 min., depends on the environment)<br>
7. Device is looking for GPS Fix (can take up to 3 min., depends on the environment)<br>
9. Device goes to sleep for 28800 s.<br>
9. Device goes to sleep for 28800 s.<br>
10. If device was stationary for 600 seconds during On Move scenario device switches to On Stop scenario.<br>
10. If device was stationary for 600 seconds during On Move scenario device switches to On Stop scenario.<br>
10.1 If <b>On Stop event record</b> is <b>Disabled</b> device does not generate a new record and starts On Stop scenario timer.<br>
10.2 If <b>On Stop event record</b> is <b>Enabled</b> device will wake up, obtain and send new position (GPS fix up to 3 minutes, record saved, send via GPRS up to 2 minutes)<br>
