78
edits
Changes
record structure table
|This feature scans for Bluetooth EYE sensors and checks each sensor’s name (up to the first 10 characters) defined in “EYE Name List”. An exact name match isn’t required, the match is consideted based on the beginning of their names. If a sensor’s name partially or fully aligns with a name on the list, the sensor’s data is stored in record (AVL ID: 11317). In cases where multiple sensors have matching names, data from all these sensors are stored into the record.[[File:Pav1.png|center|thumb]]
|This feature scans for Bluetooth EYE sensors and checks each sensor’s name (up to the first 10 characters) defined in “EYE Name List”. An exact name match isn’t required, the match is consideted based on the beginning of their names. If a sensor’s name partially or fully aligns with a name on the list, the sensor’s data is stored in record (AVL ID: 11317). In cases where multiple sensors have matching names, data from all these sensors are stored into the record.[[File:Pav1.png|center|thumb]]
In order to filter EYE Sensors by their complete local name and create EYE Sensor records (AVL ID: 11317), in Bluetooth 4.0 tab, Sensors group EYE Sensors and Name has to be selected.
In order to filter EYE Sensors by their complete local name and create EYE Sensor records (AVL ID: 11317), in Bluetooth 4.0 tab, Sensors group EYE Sensors and Name has to be selected.
{| class="wikitable" style="border-style: solid; border-width: 0px;"
{| class="wikitable" style="border-style: solid; border-width: 0px;"
==Data Clear Period==
==Data Clear Period==
Parameter “Data Clear Period” determines the length of time a sensor must go undetected by the device before it is removed from the EYE Sensor list, thus stopping the transmission of its measurements. If the ‘Data Clear Period’ is set to 0, the sensor will never be removed from the EYE Sensor list. Consequently, it will always be included in the periodic records, even if the sensor has disappeared.
Parameter “Data Clear Period” determines the length of time a sensor must go undetected by the device before it is removed from the EYE Sensor list, thus stopping the transmission of its measurements. If the ‘Data Clear Period’ is set to 0, the sensor will never be removed from the EYE Sensor list. Consequently, it will always be included in the periodic records, even if the sensor has disappeared.
|}
|}
{| style="width: 100%;"
{| style="width: 100%;"
==RSSI==
==RSSI==
This parameter defines which EYE Sensors add to EYE Sensor List, according to their current RSSI value. If captured EYE Sensor RSSI value is lower than configured RSSI parameter, sensor will not be added to the list. If sensor already has been added to the list and its RSSI value drops below configured threshold, then such sensor’s values will not be updated anymore and if such sensor’s RSSI value will not come back to acceptable range, it will be removed from EYE Sensor List after Data Clear Period. If Data Clear Period is set to 0, sensor will not be removed, when its RSSI value drop below configured threshold.
This parameter defines which EYE Sensors add to EYE Sensor List, according to their current RSSI value. If captured EYE Sensor RSSI value is lower than configured RSSI parameter, sensor will not be added to the list. If sensor already has been added to the list and its RSSI value drops below configured threshold, then such sensor’s values will not be updated anymore and if such sensor’s RSSI value will not come back to acceptable range, it will be removed from EYE Sensor List after Data Clear Period. If Data Clear Period is set to 0, sensor will not be removed, when its RSSI value drop below configured threshold.
|}
|}
{| style="width: 100%;"
{| style="width: 100%;"
==Record Period parameters==
==Record Period parameters==
These parameters define how often to send EYE Sensor data to the server, when FMB is operating in On Stop or On Move modes. EYE Sensors do not have a feature to send their data using On Change mode. Records will be sent only periodically.
These parameters define how often to send EYE Sensor data to the server, when FMB is operating in On Stop or On Move modes. EYE Sensors do not have a feature to send their data using On Change mode. Records will be sent only periodically.
|}
|}
{| style="width: 100%;"
{| style="width: 100%;"
==EYE Sensor Settings==
==EYE Sensor Settings==
This parameter defines what sensor data to add to periodic EYE Sensor records. Sensor can broadcast up to 9 different sensor parameters. In order to reduce record size and traffic, feature has been added to Enable/Disable such parameters from being added to the record if some of parameters are not needed.
This parameter defines what sensor data to add to periodic EYE Sensor records. Sensor can broadcast up to 9 different sensor parameters. In order to reduce record size and traffic, feature has been added to Enable/Disable such parameters from being added to the record if some of parameters are not needed.
|}
|}
{| style="width: 100%;"
{| style="width: 100%;"
| style="width: auto; text-align: left; border: 1px solid #0054A6; border-bottom: 1px solid #0054A6; background: white;" |Not full sensor name has to match parameters in configured EYE Name List. For example, in EYE Name List there is added name EYE_SENSOR and FMB captures EYE Sensors with complete local names EYE_SENSOR1, EYE_SENSOR2, then both EYE Sensors will be added to the list. Only part from the name start has to match configured parameters in EYE Name List.
| style="width: auto; text-align: left; border: 1px solid #0054A6; border-bottom: 1px solid #0054A6; background: white;" |Not full sensor name has to match parameters in configured EYE Name List. For example, in EYE Name List there is added name EYE_SENSOR and FMB captures EYE Sensors with complete local names EYE_SENSOR1, EYE_SENSOR2, then both EYE Sensors will be added to the list. Only part from the name start has to match configured parameters in EYE Name List.
|}If EYE Sensor has a name that matches configured one in EYE Name List and if it has a MAC address, that matches configured one in EYE Sensors filtered by MAC address, then such sensor will not be added to EYE Sensor list, but it’s data will be added to according EYE Sensor filtered by MAC IO elements.
|}If EYE Sensor has a name that matches configured one in EYE Name List and if it has a MAC address, that matches configured one in EYE Sensors filtered by MAC address, then such sensor will not be added to EYE Sensor list, but it’s data will be added to according EYE Sensor filtered by MAC IO elements.
|}
|}
{| style="width: 100%;"
{| style="width: 100%;"
EYE sensor record stores multiple eye sensors data that match with names in eye sensor name list.
EYE sensor record stores multiple eye sensors data that match with names in eye sensor name list.
{| class="wikitable"
{| class="wikitable"
!Name
!Name
!Data type
!Data type
!Description
!Description
|-
|-
|Length
|Length
|Uint8_t
|Uint8_t
|Reserved. Added to each EYE Sensor start. Currently always 0.
|Reserved. Added to each EYE Sensor start. Currently always 0.
|-
|-
|Device Name
|Device Name
|Array
|Array
|Device’s name from Device Name List tab
|Device’s name from Device Name List tab
|-
|-
|Temperature
|Temperature
|Int16_t
|Int16_t
|Temperature value measured by EYE Sensor from List. Values from -32768 to +32768 with 0.01 C delta
|Temperature value measured by EYE Sensor from List. Values from -32768 to +32768 with 0.01 C delta
|-
|-
|Humidity
|Humidity
|Uint8_t
|Uint8_t
|Humidity measured by EYE Sensor from List. Values from 0 to 100%
|Humidity measured by EYE Sensor from List. Values from 0 to 100%
|-
|-
|Magnet
|Magnet
|Uint8_t
|Uint8_t
|Magnet measured by EYE Sensor from List. Values from 0 to 1
|Magnet measured by EYE Sensor from List. Values from 0 to 1
|-
|-
|Movement
|Movement
|Uint8_t
|Uint8_t
|Movement measured by EYE Sensor from List. Values
|Movement measured by EYE Sensor from List. Values
|-
|-
|Movement count
|Movement count
|Uint16_t
|Uint16_t
|Movement counts measured by EYE Sensor from List. Values
|Movement counts measured by EYE Sensor from List. Values
|-
|-
|Angle Pitch
|Angle Pitch
|Int8_t
|Int8_t
|Pitch Angle measured by EYE Sensor from List. Values from
|Pitch Angle measured by EYE Sensor from List. Values from
|-
|-
|Angle Roll
|Angle Roll
|Int16_t
|Int16_t
|Roll Angle measured by EYE Sensor from List. Values from
|Roll Angle measured by EYE Sensor from List. Values from
|-
|-
|Low Battery State
|Low Battery State
|Uint8_t
|Uint8_t
|Low battery state measured by EYE Sensor from List. Values from 0 to 1
|Low battery state measured by EYE Sensor from List. Values from 0 to 1
|-
|-
|Battery Voltage
|Battery Voltage
|Uint16_t
|Uint16_t
|Battery voltage measured by EYE Sensor from List
|Battery voltage measured by EYE Sensor from List
|-
|-
|MAC address
|MAC address
|Uint8_t array
|Uint8_t array
|Device’s MAC address
|Device’s MAC address
|-
|-
|Magnet Trigger Count
|Magnet Trigger Count
|Uint16_t
|Uint16_t
