1,612
edits
Changes
Iridium Edge Communication Protocol (view source)
Revision as of 12:24, 17 October 2023
, 12:24, 17 October 2023→SBD IO source
==SBD IO source==
==SBD IO source==
Configures IO source which can trigger SBD record saving. 9 elements can generate Alarm for SDB sending. These elements are:
Configures IO source which can trigger SBD record saving. 10 elements can generate Alarm for SDB sending. These elements are:
*Digital input 1
* Byte 1 - Din1
*Digital input 2
* Byte 2 - Din2
*Digital output 1
* Byte 3 - Din3
*Speed
* Byte 4 - Din4
*Crash
* Byte 5 - Dout1
* Byte 6 - Dout2
* Byte 7 - Dout3
* Byte 8 - Dout4
* Byte 9 - Speed
* Byte 10 - CrashDetect
By setting the apropriate bits you'll get a hex number that can be sent to the device to configure. additionally you can set via the configurator and use getparam command to get the correct value.
<br><br>
<br><br>
Configurator parameter IDs and their explanation:
Configurator parameter IDs and their explanation:
|SBD IO source'''*'''
|SBD IO source'''*'''
|0
|0
|8
|10
|0
|0
|SBD IO elements which when enabled are included into the SBD record
|SBD IO elements which when enabled are included into the SBD record
<br><br>
<br><br>
In order to configure parameter 99422 manually users must simply set the appropriate values of bit positions, according to their needs:
In order to configure parameter 99422 manually users must simply set the appropriate values of bit positions, according to their needs:
*Bit1 - DIN 1
* Byte 1 - Din1
*Bit2 - DIN 2
* Byte 2 - Din2
*Bit5 - DOUT 1
* Byte 3 - Din3
*Bit9 - Speed
* Byte 4 - Din4
*Bit10 - Crash
* Byte 5 - Dout1
* Byte 6 - Dout2
* Byte 7 - Dout3
* Byte 8 - Dout4
* Byte 9 - Speed
* Byte 10 - CrashDetect
==SDB record structure==
==SDB record structure==
