Changes

m
no edit summary
Line 3: Line 3:  
==Disclaimer==
 
==Disclaimer==
   −
[[File:Alert.png|left|link=]] <br> If you are not using Bluetooth, '''please consider turning it off''' or '''change Bluetooth PIN''' to remove potential risks.
+
[[File:Alert.png|left|link=]] <br> If you are not using Bluetooth®, '''please consider turning it off''' or '''change Bluetooth® PIN''' to remove potential risks.
   −
If you are using Bluetooth we strongly recommend '''using AES encryption''' for enhanced security.
+
If you are using Bluetooth® we strongly recommend '''using AES encryption''' for enhanced security.
    
<br>
 
<br>
{{{model|X}}} offers Bluetooth 4.0 (Bluetooth Low Energy, also referred as BLE) functionality.
+
{{{model|X}}} offers Bluetooth® 4.0 (Bluetooth® Low Energy, also referred as BLE) functionality.
    
==Common settings==
 
==Common settings==
 
{| style="width: 100%"
 
{| style="width: 100%"
|[[Image:Bluetooth 4.0 common settings.png|right]]
+
|[[Image:Bluetooth® 4.0 common settings.png|right]]
 
* <b>Non Stop Scan</b> - Enabled Non Stop Scan feature, the device will try to scan for the sensors all the time if any of them are configured.
 
* <b>Non Stop Scan</b> - Enabled Non Stop Scan feature, the device will try to scan for the sensors all the time if any of them are configured.
 
* <b>BLE Scan Start Period</b> - This parameter determines when the next BLE scan will start for Beacons and TZ sensors.
 
* <b>BLE Scan Start Period</b> - This parameter determines when the next BLE scan will start for Beacons and TZ sensors.
Line 32: Line 32:  
===Configuration modes===
 
===Configuration modes===
 
{| style="width: 100%"
 
{| style="width: 100%"
[[Image:Bluetooth 4.0 common settings non stop scan.png|right]]
+
[[Image:Bluetooth® 4.0 common settings non stop scan.png|right]]
 
* If the Non Stop Scan is <b>Enabled</b>, the Non Stop  sensor scans until any error will be hidden. Although BLE scan duration will still be active because it is important for btgetlist SMS command.  
 
* If the Non Stop Scan is <b>Enabled</b>, the Non Stop  sensor scans until any error will be hidden. Although BLE scan duration will still be active because it is important for btgetlist SMS command.  
 
|}
 
|}
 
{| style="width: 100%"
 
{| style="width: 100%"
|[[Image:Bluetooth 4.0 common settings.png|right]]
+
|[[Image:Bluetooth® 4.0 common settings.png|right]]
 
* If Non Stop Scan <b>Disabled</b>, Scan period is selected manually.<br><br>
 
* If Non Stop Scan <b>Disabled</b>, Scan period is selected manually.<br><br>
 
The Scan time period will be selected from two sources:
 
The Scan time period will be selected from two sources:
Line 87: Line 87:  
*<b>Offset</b> – value to be added to output data. Used only with Save action.
 
*<b>Offset</b> – value to be added to output data. Used only with Save action.
   −
How to correctly configure the <b>Bluetooth LE solutions</b>, can be found here:
+
How to correctly configure the <b>Bluetooth® LE solutions</b>, can be found here:
 
*[[How to read data from TZ-BT04/05/05B sensor]]
 
*[[How to read data from TZ-BT04/05/05B sensor]]
 
*[[How to read data from BLE Sensors]]
 
*[[How to read data from BLE Sensors]]
Line 98: Line 98:  
While following the steps showed in the images below, you can find the supported sensors in our Configurator.
 
While following the steps showed in the images below, you can find the supported sensors in our Configurator.
   −
In the Configurator, find the Bluetooth 4.0 Settings menu, select the advanced sensors mode which was mentioned before. The following window should appear.
+
In the Configurator, find the Bluetooth® 4.0 Settings menu, select the advanced sensors mode which was mentioned before. The following window should appear.
 
[[Image:Preset1.png|1200px|none]]
 
[[Image:Preset1.png|1200px|none]]
  

Navigation menu