Changes

| For the data to be sent to the platform, the I/O needs to have a priority of ‘Low’, ‘High’, or ‘Panic’ so that the data can be sent with periodical data to the platform.

| For the data to be sent to the platform, the I/O needs to have a priority of ‘Low’, ‘High’, or ‘Panic’ so that the data can be sent with periodical data to the platform.

I/O Settings wiki page - https://wiki.teltonika-gps.com/view/FMB125_I/O_settings

I/O Settings wiki page - [[FMB125 I/O settings]]

|}

|}

|Please check which ignition source have you chosen and configure the device according to Your use case.  

|Please check which ignition source have you chosen and configure the device according to Your use case.  

More information about the Ignition sources can be found here: https://wiki.teltonika-gps.com/view/FMC130_System_settings#Ignition_Source

More information about the Ignition sources can be found here: [https://wiki.teltonika-gps.com/view/FMC130_System_settings#Ignition_Source Ignition source]

 

 

|}

|}

|-

|-

| This usually occurs when the device tries making OBD requests while the vehicle has no ignition and is locked. This can happen due to improper configuration, so make sure that the OBD device properly detects the ignition of the vehicle, when the ignition is actually ON.

| This usually occurs when the device tries making OBD requests while the vehicle has no ignition and is locked. This can happen due to improper configuration, so make sure that the OBD device properly detects the ignition of the vehicle, when the ignition is actually ON.

|}

|}