Changes

Line 59: Line 59:     
==Device Configuration==
 
==Device Configuration==
 +
1. Connect your FMB003, FMM003 or FMC003 device to PC via USB or Bluetooth.
 +
2. Open Teltonika.Configurator_1.7.53_E.ELD_R.8 and find your device in the list.
 +
3. Select your device from the list.
 +
4. Enable Codec 8 Extended protocol.
 +
5. Open „OBD II“ section on the left.
 +
6. In „General“ -> „OBD II Settings“ -> „OBD Feature“ select „ELD“.
 +
7. In „OBD VIN settings“ -> „VIN Source“ select prefered source. Some heavy duty vehicles may not automaticly provide VIN number, in that case we recommend to setup VIN manually.
 +
[[File:Example 101221233.png|thumb|left]]
 +
8. Save the configuration by pressing „Save to device“ on the top.
 +
9. New section with J1939 parameters can be found in „ELD“ section on the right bottom.
 +
[[File:Example 2222s2312321.jpg|thumb|left]]
    
==Supported parameter list==
 
==Supported parameter list==

Navigation menu