Line 1: |
Line 1: |
− | ==Crash Detection==
| |
− | [[File:FTC921 Crash Detection.png|alt=|right|500px]]
| |
− | If ''Crash Detection'' is enabled, it monitors the acceleration on each axis (X,Y,Z) that assists in detecting an accident.
| |
− |
| |
− | *'''Priority''' – defines the priority of crash detection scenario: 0 – disabled, 1 – low, 2 – high.
| |
− | *'''Crash Duration (ms)''' - Time needed to exceed the accelerometer threshold to trigger the crash event.
| |
− | *'''Crash Threshold (mG)''' - Acceleration threshold that needs to be exceeded for the length of the configured duration to generate a crash event.
| |
− | ''Threshold'' and ''Duration'' values are set depending on the impact magnitude that is required to be detected. FTC921 can detect events ranging between a slight tapping on the device and a severe accident.
| |
− |
| |
− | <br />
| |
− | <br />
| |
− | <br />
| |
− | <br />
| |
− | <br />
| |
− |
| |
| == Overspeeding == | | == Overspeeding == |
− | [[File:FTC921 Overspeeding new.png|alt=|right|500px]] | + | [[File:Overspeedinggif2.gif|alt=|right|374x374px]] |
| When the vehicle speed exceeds the configured maximum speed value, the scenario is activated, and an event record is generated{{{text_dout| and digital output status is changed to 1 when configured}}}.<br />Detected speed has to be greater than configured max speed +3% of configured max speed for the overspeeding event to start. To stop the overspeeding event, the detected speed has to be lower than the configured max speed -3% of the configured max speed. | | When the vehicle speed exceeds the configured maximum speed value, the scenario is activated, and an event record is generated{{{text_dout| and digital output status is changed to 1 when configured}}}.<br />Detected speed has to be greater than configured max speed +3% of configured max speed for the overspeeding event to start. To stop the overspeeding event, the detected speed has to be lower than the configured max speed -3% of the configured max speed. |
| Configurable parameters: | | Configurable parameters: |
Line 22: |
Line 7: |
| *'''Priority''' – defines the priority of overspeeding scenario: 0 – disabled, 1 – low, 2 – high. | | *'''Priority''' – defines the priority of overspeeding scenario: 0 – disabled, 1 – low, 2 – high. |
| *'''Max speed (km/h)''' – the maximum allowed speed that can be reached. If the speed exceeds the configured value, then the event will be generated. | | *'''Max speed (km/h)''' – the maximum allowed speed that can be reached. If the speed exceeds the configured value, then the event will be generated. |
− | *'''Output Control''' - Source of digital output (DOUT) for feature activation/deactivation.
| |
− | ''None'' - DOUT is not affected.
| |
− | ''DOUT 1'' - DOUT will activate when the event happens
| |
− | *'''DOUT ON duration (ms)''' - Value in milliseconds, duration for how long DOUT should be active.
| |
− | *'''DOUT OFF duration (ms)''' - Value in milliseconds, duration for how long DOUT should be inactive.
| |
− |
| |
− | <br />
| |
− | <br />
| |
− | <br />
| |
− | <br />
| |
− | <br />
| |
− | <br />
| |
− | <br />
| |
− | <br />
| |
| | | |
| ==Trip== | | ==Trip== |