Changes

no edit summary
Line 6: Line 6:  
User can select which source will be used to determine when vehicle is on stop or moving. When multiple are selected, if any of selected are active, Vehicle MOVING mode is used.
 
User can select which source will be used to determine when vehicle is on stop or moving. When multiple are selected, if any of selected are active, Vehicle MOVING mode is used.
 
Available movement source:
 
Available movement source:
[[Image:Screenshot 2024-03-01 at 14-04-10 5.2. System - Mobility documentation.png|right|300px]]
+
[[Image:Screenshot 2024-03-01 at 14-04-10 5.2. System - Mobility documentation.png|right]]
 
* Ignition: checks ignition settings which depends on Ignition Source settings;
 
* Ignition: checks ignition settings which depends on Ignition Source settings;
   Line 160: Line 160:  
|
 
|
 
|===Power On By USB/Charger===
 
|===Power On By USB/Charger===
[[Image:PT Power on by usb.png|200px|right]]
+
[[Image:PT Power on by usb.png|right]]
 
'''Note''': This feature is available forwards from FW version 55.02.03.Rev.05<br>
 
'''Note''': This feature is available forwards from FW version 55.02.03.Rev.05<br>
 
Device supports two working modes: normal mode, where the device works as usual, and charging mode, which is entered when ''Power On By USB/Charger'' parameter is <b>disabled</b>. To enter normal mode, device can be turned on by power button or by USB charger, if ''Power On By USB/Charger'' parameter is set to <b>Enable</b>.
 
Device supports two working modes: normal mode, where the device works as usual, and charging mode, which is entered when ''Power On By USB/Charger'' parameter is <b>disabled</b>. To enter normal mode, device can be turned on by power button or by USB charger, if ''Power On By USB/Charger'' parameter is set to <b>Enable</b>.
Line 171: Line 171:  
|
 
|
 
|===Continuous Charging Mode===
 
|===Continuous Charging Mode===
[[Image:PT continuous charging.png|200px|right]]
+
[[Image:PT continuous charging.png|right]]
 
'''Note''': This feature is available forwards from FW version 55.02.03.Rev.05<br>
 
'''Note''': This feature is available forwards from FW version 55.02.03.Rev.05<br>
 
Battery protection mode to extend battery life. Should only be used when device is permanently connected to external charger. When enabled charge current is reduced preventing charging to maximum voltage. This results in lower battery temperature and extended battery lifetime. Please note, this also increases battery charge time and reduces overall charge to around 85%.
 
Battery protection mode to extend battery life. Should only be used when device is permanently connected to external charger. When enabled charge current is reduced preventing charging to maximum voltage. This results in lower battery temperature and extended battery lifetime. Please note, this also increases battery charge time and reduces overall charge to around 85%.
Line 181: Line 181:  
|
 
|
 
|==Location Settings==
 
|==Location Settings==
[[Image:Location_settings_{{{model|X}}}.png|right|300px]]
+
[[Image:Location_settings_{{{model|X}}}.png|right]]
 
}}
 
}}
 
|}
 
|}
Line 313: Line 313:  
*'''Periodic Wakeup''' – if value is greater than zero, device while being in Deep Sleep or Online Deep Sleep, will wake up after defined period for beacon collection. This is mainly should be used when Bluetooth is disabled in sleep.
 
*'''Periodic Wakeup''' – if value is greater than zero, device while being in Deep Sleep or Online Deep Sleep, will wake up after defined period for beacon collection. This is mainly should be used when Bluetooth is disabled in sleep.
 
*'''Bluetooth On While In Sleep'''- by default this parameter value is set to Enable and BT will work as in base functionality. If this value is set to Disable, Bluetooth will be turned off when device goes to Deep Sleep or Online Deep Sleep and will be turned on during Periodic Wakeup or if device enters normal state.
 
*'''Bluetooth On While In Sleep'''- by default this parameter value is set to Enable and BT will work as in base functionality. If this value is set to Disable, Bluetooth will be turned off when device goes to Deep Sleep or Online Deep Sleep and will be turned on during Periodic Wakeup or if device enters normal state.
[[Image:PWU.jpg|right|300px]]
+
[[Image:PWU.jpg|right]]
 
</br></br>
 
</br></br>
  

Navigation menu