54
edits
Changes
no edit summary
==System Settings==
==System Settings==
{{#if:{{{MM_Movement_source|}}}
{{#if:{{{MM_Movement_source|}}}
|
|
}}
}}
{{#if:{{{TFT_can|}}}
{{#if:{{{TFT_can|}}}
|
|
[[Image:Screenshot 2024-03-01 at 14-09-53 5.2. System - Mobility documentation.png]]
[[Image:Screenshot 2024-03-01 at 14-09-53 5.2. System - Mobility documentation.png]]
}}
}}
{{#if:{{{AT_no_show|}}}
{{#if:{{{AT_no_show|}}}
|
|
* <b>Always</b> - Always save/send records. Allows record sending with no coordinates and no correct time.
* <b>Always</b> - Always save/send records. Allows record sending with no coordinates and no correct time.
}}
}}
{{#if:{{{TFT_show|}}}
{{#if:{{{TFT_show|}}}
|
|
* <b>PDOP filter threshold</b> - PDOP filter threshold value can be entered from which the parameters will be filtered.
* <b>PDOP filter threshold</b> - PDOP filter threshold value can be entered from which the parameters will be filtered.
}}
}}
{{#if:{{{TFT_show|}}}
{{#if:{{{TFT_show|}}}
|
|
*Digital output 1 and Digital output 2 (value:10).
*Digital output 1 and Digital output 2 (value:10).
}}
}}
{{#if:{{{MM_LED_indication|}}}
{{#if:{{{MM_LED_indication|}}}
|
|
User can turn on or off the indication LEDs.
User can turn on or off the indication LEDs.
}}
}}
{{#if:{{{AT_no_show|}}}
{{#if:{{{AT_no_show|}}}
|
|
}}
}}
{{#if:{{{TST_battery_charge_mode|}}}
{{#if:{{{TST_battery_charge_mode|}}}
|
|
}}
}}
{{#if:{{{TFT_show|}}}
{{#if:{{{TFT_show|}}}
|
|
}}
}}
{{#if:{{{TFT_show|}}}
{{#if:{{{TFT_show|}}}
|
|
}}
}}
{{#if:{{{Data_protocol|}}}
{{#if:{{{Data_protocol|}}}
|
|
*Codec 8 supports up to 255 AVL ID;
*Codec 8 supports up to 255 AVL ID;
*Codec 8 Extended supports up and above 255 AVL ID.
*Codec 8 Extended supports up and above 255 AVL ID.
}}
}}
{{#if:{{{PT_Power_on|}}}
{{#if:{{{PT_Power_on|}}}
|
|
}}
}}
{{#if:{{{PT_Power_on|}}}
{{#if:{{{PT_Power_on|}}}
|
|
Battery protection mode to extend battery life. Should only be used when device is permanently connected to external charger. When enabled charge current is reduced preventing charging to maximum voltage. This results in lower battery temperature and extended battery lifetime. Please note, this also increases battery charge time and reduces overall charge to around 85%.
Battery protection mode to extend battery life. Should only be used when device is permanently connected to external charger. When enabled charge current is reduced preventing charging to maximum voltage. This results in lower battery temperature and extended battery lifetime. Please note, this also increases battery charge time and reduces overall charge to around 85%.
}}
}}
{|
{|
