Changes

Line 10: Line 10:  
*Access point name password (optional – depending on operator). <br>
 
*Access point name password (optional – depending on operator). <br>
 
'''GPRS Authentication:'''
 
'''GPRS Authentication:'''
* Some operators use a specific type of authentication for GPRS sessions – Normal (PAP) or (Secured) PAP. If any of these is used, APN should be entered as "chap:<APN>" or "pap:<APN>" respectively. E.g. if the operator is using APN "internet" with CHAP authentication, it should be entered as "chap: internet". Information about APN and authentication type should be provided by your GSM operator. <br />
+
* Some operators use a specific type of authentication for GPRS sessions – Normal (PAP) or Secured (CHAP). If any of these is used, APN should be entered as "chap:<APN>" or "pap:<APN>" respectively. E.g. if the operator is using APN "internet" with CHAP authentication, it should be entered as "chap: internet". Information about APN and authentication type should be provided by your GSM operator. <br />
 
  −
==Auto APN search==
  −
[[File:Auto APN TCT.png|right|500px]]
  −
This feature allows the device to select the correct APN automatically, if the APN settings are present in the APN list file.
  −
After the tracker turns ON it will automatically search APN settings depending on the inserted SIM card.
  −
Note: Not all APN configurations are added to the [https://wiki.teltonika-gps.com/view/Auto_APN_feature_for_FM_trackers| APN list file]
  −
  −
 
  −
 
      
==Server settings==   
 
==Server settings==   
 
[[File:FTC primary server.jpg|right|500px]]
 
[[File:FTC primary server.jpg|right|500px]]
 
'''Domain:'''
 
'''Domain:'''
*Server or Domain address, can be written either IP address or Domain.
+
*Server or Domain address, either IP address or Domain can be written.
 
'''Port:'''
 
'''Port:'''
 
*Server Port
 
*Server Port
 
'''Data protocol'''
 
'''Data protocol'''
*TCP (Transmission control protocol) or UDP (User datagram protocol). Changing this parameter will alter how the device communication protocol. More information on the protocol differences for Teltonika devices can be found [https://wiki.teltonika-gps.com/view/Teltonika_Data_Sending_Protocols| here]
+
*TCP (Transmission control protocol) or UDP (User datagram protocol). Changing this parameter will alter how the device communicates. For more information on the protocol differences of Teltonika devices, refer here [https://wiki.teltonika-gps.com/view/Teltonika_Data_Sending_Protocols]
 
  −
 
  −
 
  −
 
  −
 
  −
 
  −
 
  −
 
  −
 
      
==Server communication settings==
 
==Server communication settings==
Line 51: Line 33:  
'''Keep-alive ping timeout (s)'''
 
'''Keep-alive ping timeout (s)'''
 
*enables network ping after timeout to prevent link close by operator. For example, if the operator closes the active link after 15 minutes when no data is sent, you can set the "network ping" timeout to 10 minutes then the device sends a 0xFF byte to server to keep the link open. Keep-alive ping timeout should be always lower than Open Link Timeout.
 
*enables network ping after timeout to prevent link close by operator. For example, if the operator closes the active link after 15 minutes when no data is sent, you can set the "network ping" timeout to 10 minutes then the device sends a 0xFF byte to server to keep the link open. Keep-alive ping timeout should be always lower than Open Link Timeout.
  −
  −
      
==FOTA Web settings==
 
==FOTA Web settings==

Navigation menu