Changes

BTSMP1 EN12830 (view source)

Revision as of 10:24, 10 May 2024

325 bytes removed ,  10 May
→‎How do I know if a recorder complies with the EN12830 standard?
Line 38: Line 38:     
The manufacturer of your recorder must be able to issue a certificate of conformity in its own name. Furthermore, this equipment must have undergone conformity tests carried out by a COFRAC-accredited standardization laboratory. The manufacturer must be able to provide you with the test report from this COFRAC-accredited laboratory. Attention, it is your responsibility to check that the report refers to the standard in force: in this case the 2018 version of EN12830.
 
The manufacturer of your recorder must be able to issue a certificate of conformity in its own name. Furthermore, this equipment must have undergone conformity tests carried out by a COFRAC-accredited standardization laboratory. The manufacturer must be able to provide you with the test report from this COFRAC-accredited laboratory. Attention, it is your responsibility to check that the report refers to the standard in force: in this case the 2018 version of EN12830.
−
  −
Moreover, in France, the Ministry of Agriculture regularly publishes the list of compliant temperature recorders, which can be consulted here. However, this list does not give any information on the version of the standard used for the declaration of conformity: 1999 or 2018.
  −
EN13486: verification of the recorder accuracy
      
==What temperature values must you observe?==
 
==What temperature values must you observe?==
Retrieved from "https://wiki.teltonika-gps.com/view/Special:MobileDiff/98115"

Navigation menu