Jump to content
  • EN

SMS/GPRS command - battery

From Teltonika Telematics Wiki
Revision as of 15:42, 16 January 2026 by Donatas.Mazonas (talk | contribs)

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)
SMS/GPRS commands > SMS/GPRS command - battery
battery

NOTE! This page describes SMS/GPRS commands for FT/AT devices, if not indicated otherwise.

Description

Returns information about battery status. If battery is not present voltage and current will return zero value.
Note! For battery level percentage, use SMS/GPRS command - readavl.

Syntax

battery

Arguments

This command has no arguments.

Examples

REQUEST OUTCOME RESPONSE
battery Success BatState: n/a FSMState: active ChargerIC: OFF ExtV: 11796 BatV:3942 BatI: 0
battery Fail No response

Response Explanation

RESPONSE ELEMENT DESCRIPTION EXAMPLE
BatState: Battery State:
n/a (not implemented yet)		 BatState: n/a
ChargingState: Charging State:
- active
- standby
- n/a
- error		 ChargingState: active
ChargerIC: Charger State:
- ON
- OFF
- Failure		 ChargerIC: ON
ExtV: External Voltage (mV) ExtV: 11796
BatV: Battery Voltage (mV) BatV: 3942
BatI: Battery Charge Current (mA) BatI: 100
Retrieved from "https://wiki.teltonika-gps.com/index.php?title=SMS/GPRS_command_-_battery&oldid=110469"