FMC650 CAN \ Tachograph: Difference between revisions

(20 intermediate revisions by the same user not shown)

Line 1:

==Introduction==

'''CAN \ Tachograph''' are used to configure device when connection of CAN1 and CAN2 BUS lines are performed.

'''CAN \ Tachograph''' are used to configure device when connection of CAN1 and CAN2 BUS lines are performed.

Teltonika recommendations:

~~Teltonika recommendations: ~~

* FMC650 CAN1 connected to vehicle's FMS(J1939) BUS line.

* FMC650 CAN2 connected to vehicle's Tachograph - Instructions can be found on '''[[FMC650 and Tachograph Solution]]''' wiki page.

* FMC650 CAN1 connected to vehicle's FMS(J1939) BUS line

==CAN Bus Settings==

* FMC650 CAN2 connected to vehicle's Tachograph - Instructions can be found on [[FMC650 and Tachograph Solution]] wiki page;

In work...

==Tachograph Settings==

In FMC650 configurator '''CAN \ Tachograph''' section tachograph settings ~~should~~ be set in order to download files.~~ ~~

In FMC650 configurator '''CAN \ Tachograph''' section tachograph settings must be set in order to download files.

~~DDD download source – to which CAN line tachograph is connected; ~~

~~Tachograph ignition source – which DIN is connected to vehicle ignition ("Ignition" parameter - tachograph ignition source will be the same as configured in "System" -> "Ignition Source"); ~~

[[image:~~FMB640_Tachograph_settings2~~.~~gif~~]]

[[image:FMX650_Tachograph_Settings.png]]

====DDD download source====

Determines on which CAN bus or K-Line bus DDD download procedure will be performed.

====Accept only DDD messages====

Restrict TachoCAN for DDD and DriverInfo use.

====K-line Voltage Control====

Controls K-Line voltage. Possibility to select 12V, 24V and Auto.

====Tachograph ignition source====

Which DIN is connected to vehicle ignition ('''Ignition''' parameter - tachograph ignition source will be the same as configured in '''System''' → '''Ignition Source''').

====Download alternative DDD card files====

Enables possibility to download specific DDD driver and co-driver card data from non original location. It may include last download information.

====Download with alternative tacho settings====

Enables automatic tacho address selection.

FMC650 can be wired to Tachograph using instructions provided in [[FMC650 and Tachograph Solution]] wiki page.

''Note:'' FMC650 can be wired to Tachograph using instructions provided in '''[[FMC650 and Tachograph Solution]]''' wiki page.

==WEB Tacho Settings==