Changes

m
no edit summary
Line 29: Line 29:  
===Data output===
 
===Data output===
 
----
 
----
Data from accelerometer/GPS are continiously monitored and processed and are used to decide whether a harsh event has occured. If either of three cases is satisfied, an event is generated and a record is saved and sent to the server ({{{model|FMB1YX}}} must be properly configured in order to send the record). Event value is multiplied by 10 before sending/saving record to get more precision when displaying data.<br/>Digital output 1 or digital output 2 can be activated for a period of time to warn the driver. Output on-time is configured separately for each feature case.
+
Data from accelerometer/GPS are continiously monitored and processed and are used to decide whether a harsh event has occured. If either of three cases is satisfied, an event is generated and a record is saved and sent to the server ({{{model|FMB1YX}}} must be properly configured in order to send the record). Event value is multiplied by 10 before sending/saving record to get more precision when displaying data.{{{text_dout|<br/>Digital output 1 or digital output 2 can be activated for a period of time to warn the driver. Output on-time is configured separately for each feature case.}}}
    
===Auto calibration===
 
===Auto calibration===
Line 46: Line 46:  
{{{pic_overspeeding|[[Image:Fmb120 over speeding.png|300px|right]]}}}
 
{{{pic_overspeeding|[[Image:Fmb120 over speeding.png|300px|right]]}}}
   −
When vehicle speed exceeds configured maximum speed value the scenario is activated: a record is generated and digital output status is changed to 1 when configured.<br/>Scenario is active until detected speed decreases below the set parameter value.
+
When vehicle speed exceeds configured maximum speed value the scenario is activated, an event record is generated{{{text_dout| and digital output status is changed to 1 when configured}}}.<br/>Scenario is active until detected speed decreases below the set parameter value.
 
<br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/>
 
<br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/>
   Line 53: Line 53:  
{{{pic_jamming|[[Image:Fmb120_jamming.png|300px|right]]}}}
 
{{{pic_jamming|[[Image:Fmb120_jamming.png|300px|right]]}}}
   −
When jamming is detected the scenario is activated: a record is generated and digital output status is changed to 1 when configured.<br/>Jamming timeout time can be configured. Digital output control and jamming event will be generated once ''Jamming'' timeout runs out. If jamming ends during timeout countdown no event will be generated and output will not be controlled.<br/>''Eventual Records'' parameter can be configured: when it is disabled scenario status value will appear in each AVL record, otherwise it will be appended only to eventual records.
+
When jamming is detected the scenario is activated, an event record is generated{{{text_dout| and digital output status is changed to 1 when configured}}} once ''Jamming'' timeout runs out. If jamming ends during timeout countdown no event will be generated{{{text_dout| and output will not be controlled}}}.<br/>''Eventual Records'' parameter can be configured: when it is disabled scenario status value will appear in each AVL record, otherwise it will be appended only to eventual records.
 
<br/><br/><br/><br/><br/><br/>
 
<br/><br/><br/><br/><br/><br/>
  

Navigation menu