FMB lvcansetting: Difference between revisions
| Line 1: | Line 1: | ||
=From 04.01.00.Rev.xx Version = | =From 04.01.00.Rev.xx Version = | ||
Command is available starting from firmware | Command is available starting from firmware 04.01.00.Rev.xx and newer.<br> | ||
lvcansetting command's update: | lvcansetting command's update: | ||
Revision as of 14:50, 23 October 2025
From 04.01.00.Rev.xx Version
Command is available starting from firmware 04.01.00.Rev.xx and newer.
lvcansetting command's update: lvcansetting:x,y x - index of setting parameter, y - value. Possible X indexes:
- 0 - setting Total engine work time Counted (minutes) (0–71 582 788)
- 1 - setting Total mileage Counted (meters) (0–858 993 455) (step – 5)
- 2 - setting Total Fuel Consumed Counted (liters x 10) (0-2 147 483 647)
- 3 - setting Total CNG use Counted (kg) (0-214 748 364)
- 8 - setting HV battery consumed energy (kWh) (0-4294967295)
- 9 - setting HV battery recuperated energy (kWh) (0-4294967295)
Examples
To configure Fuel Consumed Counted, send this command:
<SMSlogin><space><SMSpassword><space>lvcansetting:2,x
- x - (liters x 10) (0-2 147 483 647)l
Example: asd 123 lvcansetting:2,101010
Will set fuel consumed counted to 10101 litters.
To configure Total mileage Counted, send this command:
<SMSlogin><space><SMSpassword><space>lvcansetting:1,y
- y - vehicle (meters) (0–858 993 455) (step – 5)
Example: asd 123 lvcansetting:1,100005
Will set total mileage counted to 100.005 km. Step 5 means that last number must be 0 or 5.
From 03.25.16.Rev.102 version
From 03.25.16.Rev.102 lvcansetting SMS command can only be set by using DEC format instead of HEX format.
Below are provided examples of possible SMS commands and responses:
1st example:
Command:
"lvcansetting:1,44400" will change total mileage of the vehicle to 44400 km.
Answer:
"Setting OK: 44400"
2nd example:
Command:
"lvcansetting:1,68719476721" setting total mileage to 68719476721 km.
Answer:
"Setting Error" will get when values are incorrect (exceeds value limit).
From 03.25.15.Rev.145 till 03.25.16.Rev.102 version
Below are provided examples of possible SMS commands and responses:
1st example:
Command:
"lvcansetting:1,AD70" will change total mileage of the vehicle (km). AD70 converted from HEX to DEC is 44400.
Answer:
"Setting OK: AD70"
2nd example:
Command:
"lvcansetting:1,FFFFFFFF1" setting total mileage to 68719476721 km. FFFFFFFF1 converted from HEX to DEC is 68719476721.
Answer:
"Setting Error" will get when values are incorrect (exceeds value limit).