Jump to content
  • EN

Template:FTX Firmware Changelog: Difference between revisions

From Teltonika Telematics Wiki
← Older edit
VisualWikitext
No edit summary
No edit summary
 
(18 intermediate revisions by 2 users not shown)
Line 2: Line 2:
===Introduction===
===Introduction===
We are always improving our device's performance, stability, and reliability. That’s why Teltonika is one of the leading GNSS trackers manufacturers in the world.<br />
We are always improving our device's performance, stability, and reliability. That’s why Teltonika is one of the leading GNSS trackers manufacturers in the world.<br />
This document describes '''FTXXXX platform''' devices firmware improvements, changes, new features implementations as well as current firmware release version.
This document describes '''FT platform''' devices firmware improvements, changes, new features implementations as well as current firmware release version.
<br/>
<br/>
'''Important:''' Please visit [[Product Maintenance Policy]] for detailed firmware update policy.
'''Important:''' Please visit [[Product Maintenance Policy]] for detailed firmware update policy.
Line 28: Line 28:
         <td style="text-align: left; color:#000000;"><strong>3.7.0.rc-22</strong></td>
         <td style="text-align: left; color:#000000;"><strong>3.7.0.rc-22</strong></td>
         <td style="text-align: left;"> ATC700_21_182, ATM700_21_185, FTC305_31, FTC305_41, FTM305_41, FTC880_12, FTC880_24, FTC881_23, FTM880_12, FTM880_24, FTM880_02, FTC887_21, FTM887_21, FTC920_22, FTC921_26, FTC921_43, FTC924_22, FTC927_22, FTC961_23, FTC961_32, FTC965_32 </td>
         <td style="text-align: left;"> ATC700_21_182, ATM700_21_185, FTC305_31, FTC305_41, FTM305_41, FTC880_12, FTC880_24, FTC881_23, FTM880_12, FTM880_24, FTM880_02, FTC887_21, FTM887_21, FTC920_22, FTC921_26, FTC921_43, FTC924_22, FTC927_22, FTC961_23, FTC961_32, FTC965_32 </td>
         </tr>
         </tr>  
     <tr>
     <tr>
         <tr>
         <tr>
Line 69: Line 69:
         <td style="text-align: left; color:#000000;"><strong>0.26.2</strong></td>
         <td style="text-align: left; color:#000000;"><strong>0.26.2</strong></td>
         <td style="text-align: left;">FTC921_26, FTC961_12, FTC881_12</td>
         <td style="text-align: left;">FTC921_26, FTC961_12, FTC881_12</td>
    </tr>
        </tr>
   
</table>
 
'''Disclaimer:''' The list of supported hardware versions shown above indicates compatibility from firmware side only and does not imply that the firmware version is recommended for device update or factory use.
 
To verify the currently recommended and factory firmware versions for your device, please refer to the [[Firmware_versions|Firmware Versions page]].
 
<table class="nd-othertables_2" style="width:100%; margin-bottom: 30px;">
<table class="nd-othertables_2" style="width:100%; margin-bottom: 30px;">
     <tr>
     <tr>
Line 76: Line 81:
         <th style="width:20%; text-align: left;">RELEASE DATE</th>
         <th style="width:20%; text-align: left;">RELEASE DATE</th>
         <th style="width:60%; text-align: left;">CHANGES</th>
         <th style="width:60%; text-align: left;">CHANGES</th>
    </tr>
      </tr>
             <td style="text-align: left; color:#000000;"><strong>3.7.0-rc.22</strong></td>
             <td style="text-align: left; color:#000000;"><strong>3.7.0-rc.22</strong></td>
         <td style="text-align: left;">2025-01-16</td>
         <td style="text-align: left;">2025-01-16</td>
Line 82: Line 87:


'''FIXES/IMPROVEMENTS'''
'''FIXES/IMPROVEMENTS'''
<!-- * '''* I/O elements accelerometer axis data is now displayed with ground vector in TCT-->


* Resolved issue where operator would be incorrectly banned after several attempts to open session
* Resolved issue where operator would be incorrectly banned after several attempts to open session


* Resolved issue where DOUT2 or DOUT3 control would not work correctly after receiving setdigout or setdigout commands
* Resolved issue where DOUT2 or DOUT3 control would not work correctly after receiving setdigout or setdigout commands
<!-- * Resolved issue where devices would not send all records from memory on the first connection after waking up from sleep mode (Stage 2)-->
<!-- * * Resolved issue where towing detection exited active state when movement was still detected (Stage 2)-->
         </td>
         </td>
     </tr>
     </tr>
Line 103: Line 100:
'''HARDWARE SUPPORT'''
'''HARDWARE SUPPORT'''


<!-- * '''NEW''' Added support for FTM927_22_208 hardware modification (Stage 2) -->
* '''NEW''' Added support for '''ATC700_21''', '''ATM700_21''' hardware modifications
 
<!-- * '''NEW''' Added support for FTM164_12_177-179 hardware modifications (Stage 2) -->
 
<!-- * '''NEW''' Added support for FTC164_12_175 hardware modification (Stage 2) -->
 
<!-- * '''* '''NEW''' Added support for FTM887 hardware position 190 -->
 
<!-- * * '''NEW''' Added support for FTX887_21 hardware modification -->
 
* '''NEW''' Added support for ATC700_21_182, ATM700_21_185 hardware modifications
 


'''NEW FEATURES'''
'''NEW FEATURES'''


* '''NEW''' Bluetooth MCU shutdown logic in sleep modes implemented
* '''NEW''' '''[[FTC305_System#Power_saving_settings|Bluetooth MCU shutdown]]''' logic in sleep modes implemented
 
* '''NEW''' CAN MCU shutdown logic in sleep modes implemented
 
* '''NEW''' Authorized iButton list for Immobilizer feature
 
* '''NEW''' Added Software Defined Pins feature


* '''NEW''' Added Manual CAN option for Ignition and Movement Sources
* '''NEW''' '''[[FTC305_System#Power_saving_settings|CAN MCU shutdown]]'''  logic in sleep modes implemented


<!-- * '''NEW''' Added Socket Encryption Status indication in TCT (Stage 2) -->
* '''NEW''' '''[[FTC305_Features#Immobilizer|Authorized iButton list for Immobilizer feature]]'''


<!-- * '''NEW''' Added DR reset command (dr_reset) to fully clear Dead Reckoning calibration data when required (Stage 2 / Internal) -->
* '''NEW''' Added '''[[FTC305_Device_status#Pinout_selection|Software Defined Pins feature]]'''


<!-- * '''NEW''' Added SECO (Secure Engine Cut-Off) functionality (Stage 2) -->
* '''NEW''' Added Manual CAN option for '''[[FTC305_System#Ignition_settings|Ignition]]''' and '''[[FTC305_System#Movement_settings|Movement]]''' Sources


* '''NEW''' Added "Current LTE Band" I/O element
* '''NEW''' Added "Current LTE Band" I/O element
<!-- * '''NEW''' Added TLS/DTLS certificate support for TCP/UDP servers (Stage 2) -->
<!-- * '''NEW''' Added basic MQTT support (Stage 2) -->


* '''NEW''' Added logic to reconnect to the server immediately after server configuration change
* '''NEW''' Added logic to reconnect to the server immediately after server configuration change


<!-- * '''NEW''' Added configurable parameter to enable/disable Dead Reckoning functionality (Stage 2) -->
* '''NEW''' Added '''[[ATC700_System#Button_settings|User Button]]''' functionality for ['''ATC700''', '''ATM700'''] devices
 
* '''NEW''' Added Auto Geofence timezone handling logic
 
* '''NEW''' Added Manual Geofence timezone handling logic
 
* '''NEW''' Added User Button functionality for [ATC700, ATM700] devices
 
* '''NEW''' Added Power Bank Support functionality for [ATC700, ATM700]  devices
 
* '''NEW''' Added Power Off via Button functionality for [ATC700, ATM700]  devices
 
* '''NEW''' Added accelerometer sensitivity configuration functionality for [ATC700, ATM700]  devices
 
* '''NEW''' Added GNSS fix search timeout parameter used after waking up from sleep for [ATC700, ATM700] devices


<!-- * '''NEW''' Added polygon-type geofence support (Stage 2) -->
* '''NEW''' Added '''[[ATC700_System#Power_Bank_Support|Power Bank]]''' functionality for ['''ATC700''', '''ATM700'''] devices


<!-- * '''NEW''' Added Digital Output control in Geofence feature (Stage 2) -->
* '''NEW''' Added '''[[ATC700_System#Actions|Power Off via Button]]''' functionality for ['''ATC700''', '''ATM700'''] devices


<!-- * '''NEW''' Added Private/Business mode functionality (Stage 2) -->
* '''NEW''' Added '''[[ATC700_Tracking_settings#Records_settings|GNSS fix search timeout]]''' parameter used after waking up from sleep for ['''ATC700''', '''ATM700'''] devices


* '''NEW''' Added support for IMSI and ICCID reporting to FOTA
* '''NEW''' Added support for IMSI and ICCID reporting to FOTA


<!-- * '''NEW''' Added logic to save Dead Reckoning calibration data in sleep modes (Stage 2) -->
* '''NEW''' Major version updated to '''3.7.0''' and downgrade protection added
 
<!--->Country Blocking Service page does not have a category attached. The intended purpose is to provide more information on the functionality.<--->
* '''NEW''' Major version updated to 3.7.0 and downgrade protection added
* '''NEW''' Conditions when device operation is prohibited updated, for more information please refer to '''[[Country Blocking Service]]'''
 
* '''NEW''' Conditions when device operation is prohibited updated
 
<!-- * '''NEW''' Added QZSS satellite system support (Stage 2) -->
 
<!-- * '''NEW''' Added SMS events logic (Stage 2) -->
 
<!-- * '''NEW''' Added Dead Reckoning sleep parameters (Stage 2) -->
 
<!-- * '''NEW''' Added On Demand Tracking functionality (Stage 2) -->
 
<!-- * '''NEW''' Added on_demand_trackingX SMS/GPRS command (Stage 2) -->
 
<!-- * '''NEW''' * '''NEW''' Added GNSS fuel counter feature -->
 


'''FIXES/IMPROVEMENTS'''
'''FIXES/IMPROVEMENTS'''
<!-- * '''* I/O elements accelerometer axis data is now displayed with ground vector in TCT-->


* Improved Instant Movement detection algorithm to more accurately represent status
* Improved Instant Movement detection algorithm to more accurately represent status
Line 229: Line 174:
* Resolved issue where firmware update status was shown as failed in TCT even when update was successful
* Resolved issue where firmware update status was shown as failed in TCT even when update was successful


* Improved battery detection algorithm for [FTX88X, FTX96X, FTX13X] devices
* Improved battery detection algorithm for [FTX'''88X''', FTC'''96X''', FTX'''134'''] devices


* Improved ban list functionality where operator-specific operator codes were not banned after 3 attempts as expected
* Improved ban list functionality where operator-specific operator codes were not banned after 3 attempts as expected
Line 262: Line 207:
         <td style="text-align: left;">  '''HARDWARE SUPPORT'''
         <td style="text-align: left;">  '''HARDWARE SUPPORT'''
          
          
* '''NEW''' Removed support for FTM305_31 hardware modification
* '''NEW''' Removed support for '''FTM305_31''' hardware modification


'''NEW FEATURES'''
'''NEW FEATURES'''
Line 344: Line 289:
         <td style="text-align: left;">  '''HARDWARE SUPPORT'''
         <td style="text-align: left;">  '''HARDWARE SUPPORT'''
          
          
* '''NEW''' Added support for FTC305_31, FTM305_31 hardware modifications
* '''NEW''' Added support for '''FTC305_31''', '''FTM305_31''' hardware modifications


   </td>
   </td>
Line 354: Line 299:
         <td style="text-align: left;">  '''HARDWARE SUPPORT'''
         <td style="text-align: left;">  '''HARDWARE SUPPORT'''
          
          
* '''NEW''' Added support for FTC880_24, FTM880_12, FTM880_24, FTM880_02, hardware modifications
* '''NEW''' Added support for '''FTC880_24''', '''FTM880_12''', '''FTM880_24''', '''FTM880_02''', hardware modifications


'''FIXES/IMPROVEMENTS'''
'''FIXES/IMPROVEMENTS'''
Line 370: Line 315:
         <td style="text-align: left;">  '''HARDWARE SUPPORT'''
         <td style="text-align: left;">  '''HARDWARE SUPPORT'''
          
          
* '''NEW''' Added support for FTC880_12 and FTC961_23 hardware modifications
* '''NEW''' Added support for '''FTC880_12''' and '''FTC961_23''' hardware modifications


* '''NEW''' Hardware modifications FTC961_12, FTC881_12 no longer supported due to component change
* '''NEW''' Hardware modifications '''FTC961_12''', '''FTC881_12''' no longer supported due to component change


'''NEW FEATURES'''
'''NEW FEATURES'''

Latest revision as of 15:32, 21 January 2026

Introduction

We are always improving our device's performance, stability, and reliability. That’s why Teltonika is one of the leading GNSS trackers manufacturers in the world.
This document describes FT platform devices firmware improvements, changes, new features implementations as well as current firmware release version.
Important: Please visit Product Maintenance Policy for detailed firmware update policy.

Firmware versioning

  • Structure

[XX].[YY].[ZZ]

  • Syntax description
    • XX – shows major backward incompatible changes in firmware, i.e. security feature.
    • YY – shows major changes like new features or module support additions.
    • ZZ – shows changes like critical issue fixes.

Firmware versions

FIRMWARE VERSION SUPPORTED HARDWARE
3.7.0.rc-22 ATC700_21_182, ATM700_21_185, FTC305_31, FTC305_41, FTM305_41, FTC880_12, FTC880_24, FTC881_23, FTM880_12, FTM880_24, FTM880_02, FTC887_21, FTM887_21, FTC920_22, FTC921_26, FTC921_43, FTC924_22, FTC927_22, FTC961_23, FTC961_32, FTC965_32
3.7.0.rc-19 ATC700_21_182, ATM700_21_185, FTC305_31, FTC305_41, FTM305_41, FTC880_12, FTC880_24, FTC881_23, FTM880_12, FTM880_24, FTM880_02, FTC887_21, FTM887_21, FTC920_22, FTC921_26, FTC921_43, FTC924_22, FTC927_22, FTC961_23, FTC961_32, FTC965_32
3.0.8 FTC305_31, FTC305_41, FTM305_41, FTC880_12, FTC880_24, FTC881_23, FTM880_12, FTM880_24, FTM880_02, FTC887_21, FTM887_21, FTC920_22, FTC921_26, FTC921_43, FTC924_22, FTC927_22, FTC961_23, FTC961_32, FTC965_32
3.0.7 FTC305_31, FTC305_41, FTM305_41, FTC880_12, FTC880_24, FTC881_23, FTM880_12, FTM880_24, FTM880_02, FTC887_21, FTM887_21, FTC920_22, FTC921_26, FTC921_43, FTC924_22, FTC927_22, FTC961_23, FTC961_32, FTC965_32
2.4.3 FTC921_26, FTC961_23, FTC881_23, FTC880_12, FTC880_24, FTM880_12, FTM880_24, FTM880_02, FTC305_31, FTM305_31
2.4.0 FTC921_26, FTC961_23, FTC881_23, FTC880_12, FTC880_24, FTM880_12, FTM880_24, FTM880_02, FTC305_31, FTM305_31
2.1.4 FTC921_26, FTC961_23, FTC881_23, FTC880_12, FTC880_24, FTM880_12, FTM880_24, FTM880_02
2.1.1 FTC921_26, FTC961_23, FTC880_12
1.5.1 FTC921_26, FTC961_12, FTC881_12
0.40.3 FTC921_26, FTC961_12, FTC881_12
0.26.2 FTC921_26, FTC961_12, FTC881_12

Disclaimer: The list of supported hardware versions shown above indicates compatibility from firmware side only and does not imply that the firmware version is recommended for device update or factory use.

To verify the currently recommended and factory firmware versions for your device, please refer to the Firmware Versions page.

FIRMWARE VERSION RELEASE DATE CHANGES
3.7.0-rc.22 2025-01-16

FIXES/IMPROVEMENTS

  • Resolved issue where operator would be incorrectly banned after several attempts to open session
  • Resolved issue where DOUT2 or DOUT3 control would not work correctly after receiving setdigout or setdigout commands
3.7.0-rc.19 2025-12-19

HARDWARE SUPPORT

  • NEW Added support for ATC700_21, ATM700_21 hardware modifications

NEW FEATURES

  • NEW Added "Current LTE Band" I/O element
  • NEW Added logic to reconnect to the server immediately after server configuration change
  • NEW Added User Button functionality for [ATC700, ATM700] devices
  • NEW Added Power Bank functionality for [ATC700, ATM700] devices
  • NEW Added support for IMSI and ICCID reporting to FOTA
  • NEW Major version updated to 3.7.0 and downgrade protection added
  • NEW Conditions when device operation is prohibited updated, for more information please refer to Country Blocking Service

FIXES/IMPROVEMENTS

  • Improved Instant Movement detection algorithm to more accurately represent status
  • Dynamic ground is now subtracted from IMU data used for Crash/Crash Trace scenarios
  • Implemented continuous parking vector updating using EMA filter to improve towing detection
  • Default Dead Reckoning alignment mode set to "Swift" mode
  • Resolved issue where operator would be incorrectly banned after several attempts to open session
  • Resolved issue where sleep timeout would not reset after receiving SMS
  • Resolved issue where movement would be detected for a short period of time after periodic wake-ups to send data in Power-Off Sleep mode
  • Resolved issue where DOUT2 and DOUT3 states would not be retained after waking up from Power-Off Sleep mode
  • Resolved issue where "Authorization persist duration" option could not be disabled via TCT
  • Resolved issue where device would sometimes wake up from Power-Off Sleep without valid wake-up reasons
  • Fixed status display of Immobilizer I/O element in TCT
  • Resolved issue where SIM card presence status would not update correctly in TCT
  • Network status is now updated immediately when SIM is removed
  • Resolved issue where Digital Output would not be disabled after timeout if device resets
  • Resolved issue where changing Charge Mode configuration would not take effect immediately
  • Resolved issue where removing SIM and inserting it back would prevent device from connecting to the network
  • Resolved issue where devices would not send High Priority records to server immediately when operating in Deep Sleep mode
  • Digital Output state is now saved in memory and retained after device restart
  • Improved Digital Output state control stability
  • Resolved issue where firmware update status was shown as failed in TCT even when update was successful
  • Improved battery detection algorithm for [FTX88X, FTC96X, FTX134] devices
  • Improved ban list functionality where operator-specific operator codes were not banned after 3 attempts as expected
  • Speed Jump filter implemented
  • Altitude Jump filter implemented
  • GNSS data filtering improvements
  • Resolved issue where advanced unplug detection generated an event without movement source for the first external voltage disconnection
  • Resolved issue where device in Online Sleep mode with Incoming Call feature failed to report last known position even though GNSS fix was available before entering sleep mode
  • Resolved issue where device goes to Power Off Sleep mode when connected to TCT via USB
3.0.8 2025-12-08 FIXES/IMPROVEMENTS
  • Fixed a compatibility issue for [FTX305, FTX134] devices where software-defined pins (switch between DIN/AIN/1-Wire) were not initialized correctly after upgrading to newer firmware versions that support this feature
  • Fixed an issue where device current consumption increased when operating without cellular connectivity
3.0.7 2025-10-29 HARDWARE SUPPORT
  • NEW Removed support for FTM305_31 hardware modification

NEW FEATURES

  • NEW Dead-Reckoning functionality support for [FTXXX7] devices
  • NEW Teltonika EYE Sensors and Beacon support for [FTXXX4, FTXXX5, FTXXX7] devices
  • NEW Added Record Scheduler functionality
  • NEW Added "Time from last fix" I/O element
  • NEW Added accelerometer: "Axis X", "Axis Y", "Axis Z" I/O elements
  • NEW Added "Beacon Presence" I/O element
  • NEW Added Second Server funtionality
  • NEW Added Smart Ignition Detection functionality
  • NEW Added Ignition ON counter functionality
  • NEW Two-wheeler fall down detection functionality
  • NEW Added Inverted DOUT functionality
  • NEW Added DOUT extension for Network Jamming functionality
  • NEW Added DOUT recovery after overcurrent
  • NEW Added Location Based Service functionality
  • NEW Added eSIM Chip support
  • NEW Added Manual Geofence functionality


FIXES/IMPROVEMENTS

  • Enhanced modem stability by ensuring recovery mechanism is triggered correctly after PDP context activation failure
  • Resolved issue where records stored in Retained RAM would get corrupted after firmware update, preventing the device from sending data
  • Improved handling of ambiguous PDP context states to ensure stable modem operation
  • Resolved issue with PDP context activation when the device had no AutoAPN file and the configured APN was not applied
  • Improved reliability of ExtMCU firmware updates
  • Improved deep sleep power consumption
  • Trip odometer IO initialization improvements
  • Fixed delays beetween server connections
  • Fixed authorized number input, by improving behaviour, when second digit is 0
  • Resolved an issue that caused the sender task to hang during socket disconnection when the TCP/IP Server confirmation method was active and the open link timeout was reached after sending records
  • Improved modem update via FOTA WEB flow
  • General stability, connectivity and GNSS related improvements
2.4.3 2025-04-15 FIXES/IMPROVEMENTS
  • Manufacturing testing improvements
2.4.0 2025-03-14 HARDWARE SUPPORT
  • NEW Added support for FTC305_31, FTM305_31 hardware modifications
2.1.4 2025-07-21 HARDWARE SUPPORT
  • NEW Added support for FTC880_24, FTM880_12, FTM880_24, FTM880_02, hardware modifications

FIXES/IMPROVEMENTS

  • AutoAPN file upload in the factory
  • Added possibility to upload customer configuration files in factory
  • Manufacturing testing improvements
  • Fixed reversed logic in unplug detection feature
2.1.1 2025-06-04 HARDWARE SUPPORT
  • NEW Added support for FTC880_12 and FTC961_23 hardware modifications
  • NEW Hardware modifications FTC961_12, FTC881_12 no longer supported due to component change

NEW FEATURES

  • NEW IPv6 protocol support
  • NEW Towing detection feature
  • NEW Quectel BG95-M1 modem support
  • NEW Quectel BG95-M3 modem support
  • NEW Custom scenarios feature
  • NEW Permanent link feature
  • NEW GSM/LTE operator white & block list feature
  • NEW Auto Geofence – Deactivate by Digital Input
  • NEW Crash Trace
  • NEW Odometer feature

FIXES/IMPROVEMENTS

  • Fixed auto geofence deactivation via SMS
  • Fixed AVL ID data sending (Sleep mode – ID 200, PCB temperature – ID 70, Current active log file – ID 13266, Max log file count – ID 13267) to ensure values are always visible, update as expected, and are correctly displayed on the server
  • Fixed DOUT ON and OFF durations to match documentation
  • Improved ban list handling
  • Improved modem stability
  • Fixed DOUT control via setdigout command
  • Improved deep sleep behavior, reducing power consumption by 0.5 mA
  • Fixed getver SMS command response – device now replies with full version info regardless of sleep mode
  • Improved average vector magnitude calculation method
  • Improved auto geofence functionality
  • Fixed setdigout and setigndigout SMS responses to align with documentation
  • Fixed towing detection DOUT OFF time limits – now properly restricted to 0–5000 ms
1.5.1 2024-12-16 NEW FEATURES
  • NEW added TCT Terminal
  • NEW added Online Sleep
  • NEW added Power Off Sleep
  • NEW added Advanced Crash Detection
  • NEW added Modem firmware update via TCT & FOTA WEB
  • NEW added Network Settings with mode selection
  • NEW added Gravity filtering from accelerometer
  • NEW added Accelerometer Calibration
  • NEW added Calibration status I/O
  • NEW added PCB temperature I/O
  • NEW added Auto Geofence scenario

FIXES/IMPROVEMENTS

  • Record manager improvements. Resolved file corruption issues
  • Battery charging current indication improvements
  • Adjusted priority management for setigndigout and setdigout. Now setdigout is not ignored and correctly controls Digital Output
  • Resolved intermittent turn-offs of battery charging
  • Resolved inaccuracies in sleep mode timing algorithms
  • Corrected modem reactivation process following sleep exit event
  • Addressed an issue where the getgps command incorrectly reported the GNSS power status
  • Resolved issue were device would have high consumption is sleep after USB cable was disconnected
  • Digital Output recovery after overcurrent mechanism implemented
  • Fixed setdigout command response information prints
  • Fixed issue were records were being sent not according to configured priority and operand
  • Allow to turn on modem when USB cable and battery are connected
0.40.3 2024-08-01 NEW FEATURES
  • NEW added Unplug Detection Advanced mode
  • NEW added Instant & Delayed movement scenario
  • NEW added Eco Driving scenario
  • NEW added SMS Number authorization feature
  • NEW added Simple Crash Detection scenario
  • NEW added Excessive Idling scenario
  • NEW added Jamming Detection scenario
  • NEW added Digital Output On/Off duration feature
  • NEW added Server Records confirmation options feature
  • NEW added Deep Sleep power saving mode feature
  • NEW added Codec12 feature
  • NEW added AutoAPN feature
  • NEW added TCT Configuration Password protection feature
  • NEW added SIM Cards with PIN support
  • NEW added Log file download via FOTA Web feature
  • NEW added Device Live Status information feature

FIXES/IMPROVEMENTS

  • Record manager improvements. Record saving no longer stops during frequent record saving.
  • Digital Output state improvements.
  • Incorrect battery charging current indication improvements.
  • SMS message parsing improvements.
  • Last known GNSS position utilization for records improved.
  • FOTA task execution improved. Device correctly awaits for TCP ACK when sending data.
  • Record manager improvements. Record I/O correctly copied to different records.
  • Trip AVL ID size fixed to match documentation.
  • Improved record sending retry timeout calculation.
  • "setigndigout" command format and logic issues resolved.
  • Total odometer value saving improvements.
  • PDP context management improvements. Correctly deactive PDP context after pdpdeact URC message. Modem IMEI recognition in roaming mode fixed
  • Record manager improvements. Corrected FIFO functionaltiy to overwrite records correctly.
  • "geimeiccid" command response issue resovled.
  • Instant movement detection improvements. Resolved issue when movement state was lost during trip.
  • Record sending improvements
  • Resolved issue where records were generated even if I/O priority is set to "None".
  • Modem init improved corrected when using roaming SIM. IMEI is now detected correctly.
0.26.2 2024-02-13 NEW FEATURES
  • NEW added the SMS "deleterecords"
  • NEW added the SMS "getgps"
  • NEW added the SMS "getio"
  • NEW added the SMS "allver"
  • NEW added the SMS "getstatus"
  • NEW added the SMS "setdigout"
  • NEW added the SMS "setparam"
  • NEW added the SMS "getparam"
  • NEW added the SMS "readavl"
  • NEW added the SMS "cpureset"
  • NEW added sent SMS counter
  • NEW added sent records counter
  • NEW added network ping timeout feature
  • NEW added min max values of NTP resync period
  • NEW added live satellite info
  • NEW added battery charging modes
  • NEW added critical sleep mode
  • NEW added configurable APN settings and ability to disable mobile data
  • NEW UDP protocol implemented
  • NEW added the SMS "getrecord"
  • NEW added the SMS "web_connect"
  • NEW added the SMS "getinfo"
  • NEW added accelerometer test command
  • NEW added roaming mode change event
  • NEW added SMS password
  • NEW added the SMS "extformat"
  • NEW added the SMS "getver"

FIXES/IMPROVEMENTS

  • Record loading speed improvement
  • Record manager improvements. Records are sent immediately after generation when link is already open
  • Record generation period reconfiguration corrected, the device starts generating new records based on newly configured timeout
  • Open link timeout functionality correction. Link is closed accordingly to open link timeout configuration
  • Corrected records send triggering after movement status change
  • Corrected data acquisition records generation by speed units
  • Conversion coefficient for AIN measurement corrected
  • Odometer max value saving corrected
  • Odometer value is saved in kilometers instead of meters
  • Instant movement detection corrected to be detected from first move
  • Wrong ignition source for data acquisition detection instead of movement source fixed
  • SMS sending timeout fix
  • Modem IMEI recognition in roaming mode fixed
  • SMS command "setparam" stability improvements
  • Accelerometer initialization improvements
  • Modem stability improvements
  • Accelerometer data validation improvements
  • Record sending improvements
  • Ignition check data spam without time synchronization fixed
  • Power management (sleep) improvements
  • Subsequent connection to server failure timeout increase feature added
  • DOUT stability improvements
Retrieved from "https://wiki.teltonika-gps.com/index.php?title=Template:FTX_Firmware_Changelog&oldid=110710"