Template:FMC0 First start card: Difference between revisions

Latest revision as of 13:06, 23 January 2026

Advanced Plug and Track real-time tracking terminal with GNSS, GSM and Bluetooth connectivity

How to insert Micro-SIM card and connect battery

Gently remove FMB1YX cover using plastic pry tool from both sides.
Insert Micro-SIM card as shown with PIN request disabled or read Security info how to enter it later in Configurator. Make sure that Micro-SIM card cut-off corner is pointing forward to slot.
Connect battery as shown to device. Position the battery in place where it does not obstruct other components.
Attach device cover back.

Device is ready to be connected.

Micro-SIM card insertion/removal must be performed when device is powered off – external voltage and battery are disconnected. Otherwise Micro-SIM card might be damaged or device will not detect it.

@@ Line 1: / Line 1: @@
-[[Image:Qsg_rut950_teltonika.PNG|centre]]
 <b>{{{description|Advanced Plug and Track real-time tracking terminal with GNSS, GSM and Bluetooth connectivity}}}</b>{{{pic|[[Image:FMB001_00_demo.png|400px|right]]}}}
@@ Line 26: / Line 23: @@
 | [[File:Alert.png|left|link=]] || <b>{{{sim_type|Micro-}}}SIM card insertion/removal must be performed when device is powered off – external voltage and battery are disconnected. Otherwise {{{sim_type|Micro-}}}SIM card might be damaged or device will not detect it.</b>
 |}
-=='''How to insert SD card into {{{model|FMB1YX}}}'''==
-Insert SD card as shown.
-<br/><b>NOTE:</b> SD cards are only used in devices manufactured until '''2018-04'''. Newer devices have internal flash memory.
-{{{sd_card_insert|[[Image:Fmb010_sd_card_0.png|280px]]}}}