Jump to content
  • EN

TEST-X: Difference between revisions

From Teltonika Telematics Wiki
← Older edit
VisualWikitext
No edit summary
No edit summary
 
(66 intermediate revisions by the same user not shown)
Line 1: Line 1:
== Immobilizer Functionality with iButton Integration ==
== Private /Bussines mode ==
[[File:Immobilizer TCT panel.png|right|500px]]
[[File:Private business mode TCT panel.png|right|500px]]
This feature enables employees to use company vehicles for personal purposes while maintaining compliance with EU General Data Protection Regulation requirements. When Private mode is active, the device masks location data and other sensitive information to prevent unauthorized tracking. Business mode restores full data visibility for standard fleet operations.


The Immobilizer feature provides an additional layer of vehicle security by requiring driver authorization after the ignition is turned on. It is designed to block the vehicle's starter circuit, preventing the engine from being started until an authorized identification element is presented.
Private/Business Mode is used in fleet operations where employees may drive company vehicles for both work and personal needs. It helps ensure privacy during personal use by disabling location reporting, while still providing full tracking and operational data during business use.


This functionality is essential for preventing vehicle theft and ensuring that only permitted individuals can operate a vehicle. By linking vehicle operation to a physical token, it significantly enhances security for fleet management, rental services, and any application where control over vehicle access is a priority.
In the TCT Features section, the Private / Business Mode allows the user to configure when the private mode should activate and deactivate by selecting one of the available feature triggers: a weekly scheduler or an external trigger type.
Additionally, the user can define how the system should handle GNSS and odometer data while private mode is active.
The feature also supports automatic deactivation of private mode when specific events are detected, such as Unplug, Towing, and other configured triggers.


The feature operates based on the vehicle's ignition status. When the ignition is turned on, the system enters a "Waiting authorization" state, activating a digital output to keep the starter blocked. Upon successful presentation of an authorized element, the system transitions to an "Authorized" state, deactivates the output, and allows the engine to run. The authorization is automatically revoked after the ignition has been off for a configurable period.


=== <u>Prerequisites and Important Settings </u> ===
=== Prerequisites and Important Settings ===  
* The vehicle's ignition status must be monitored by one of the device's digital inputs (DIN).
* '''IMPORTANT:''' After exiting any sleep mode, DOUT and Private/Business state will automatically return to the values they had before entering the sleep mode.
* A relay must be correctly installed to interrupt the vehicle's starter circuit and connected to one of the device's configurable digital outputs (DOUT).
* An iButton reader is required to detect the authorization element.
* The unique IDs of all authorized iButtons must be pre-configured in the device's authorization list.


=== <u> Basic Operation </u> ===
=== Basic Operation ===  
The feature's logic is managed through three distinct states:<br>
* In the Private/Business window, the user can set the priority level used for sending messages ('''HIGH''' or '''LOW''' priority).
1. '''Not Authorized State:'''
* The DOUT control function allows indicating the state of Private Mode.When Private Mode is detected as '''ON''', the configured DOUT output will also be switched '''ON'''.
* This is the default, idle state when the vehicle's ignition is OFF. The immobilizer is armed and waiting.
 
2. '''Waiting Authorization State:'''
==== DOUT State in Sleep mode ====
* When the ignition is turned ON, the system transitions to this state.
In different sleep modes DOUT behavior as well as Private/Business state are as follows:
* If a Digital Output is configured, it is immediately activated to control the relay and block the starter circuit.
 
* The device actively waits for an authorization element to be presented.
{| class="wikitable"
3. '''Authorized State:'''
! Mode
* Once an ID is detected and confirmed to be authorized, the system transitions to the Authorized state.
! DOUT State
* The configured Digital Output is deactivated, which unblocks the starter circuit and allows the vehicle to be started and driven.
! Private/Business State
* The driver remains authorized as long as the ignition stays ON.
|-
4. '''De-authorization Process:'''
| Online Sleep
* When the ignition is turned OFF, a de-authorization timer begins.
| Last state before entering sleep
* If the ignition remains off for the entire duration of the configured "Authorization persist duration", the system revokes the authorization and returns to the Not Authorized state. If the ignition is turned back on before the timeout expires, the authorization remains active.
| Last state before entering sleep
|-
| Deep Sleep
| Last state before entering sleep
| Last state before entering Deep Sleep
|-
| Power Off Sleep
| DOUT is OFF
| Last state before entering Power Off Sleep
|}
 
After exiting any sleep mode, DOUT and Private/Business state return to the state they were in before entering the sleep mode.
 
GNSS Data Masking defines how the device will handle location information (GNSS data) while in Private Mode:
 
* '''No masking''' – GNSS information is not hidden.
* '''GNSS data is sent as zero''' – In every record sent to the server, the GNSS fields (latitude, longitude, altitude, angle, and number of satellites) are set to “'''0'''”.Additionally, GSM Cell ID and GSM Area Code information will '''not be sent'''.
* '''GNSS data is sent as last known good position''' –The last valid GNSS data (latitude, longitude, altitude) recorded before entering Private Mode is sent in every record.
The following I/O elements are sent as “'''0'''”:
* GSM Cell ID (AVL ID 205)
* GSM Area Code (AVL ID 206)
* '''Private Mode Odometer Stop''' - when enabled, the device does '''not accumulate odometer data''' while Private Mode is active.
* '''Private Business Deactivation''' – enables the system to automatically deactivate Private Mode based on selected scenarios.
Available scenarios include: '''Towing, Unplug, Crash,''' and '''Autogeofence'''.
The user can select one, several, or all scenarios from the dropdown menu.
 
'''NOTE:''' <br>
If  Trigger type is set to '''External''', the user must press the button or switch again to re enable Private Mode.
If Trigger type is set to '''Weekly Schedule''', the user must wait until the next scheduled activation time for Private Mode to be enabled again.
 
==== Feature Triggers ====
This section allows the user to configure the trigger logic that switches the feature between '''Private Mode''' and '''Business Mode'''.
 
<big>'''Trigger Types'''</big><br>
'''1. External''' <br>
External triggers can be configured using Digital Inputs (DINs).
When External is selected, the user can choose a specific DIN for the trigger logic.
DIN Mode Options:<br>
 
* Button Mode
The selected DIN operates as a button.<br>
Private Mode is activated or deactivated when the DIN status changes (triggered on the status transition).<br>
 
* Switch Mode
The selected DIN operates as a switch.<br>
Private Mode is controlled based on the current DIN value:
* DIN = HIGH → Private Mode enabled
* DIN = LOW → Private Mode disabled
 
<big>'''2. Weekly Schedule'''</big> <br>
A weekly schedule can be configured to automatically enable Private Mode at specific times based on the user defined schedule.
 
==== Weekly schedule ====
[[File:Private Business mode Weekly schedule.png|right|500px]]
* Enables automatic switching between '''Private Mode''' and '''Business Mode''' based on configured '''time, date, daylight saving rules,''' and '''time zones'''.


=== <u> Parameters list </u>===
<table class="nd-othertables_2" style="width:100%; border-collapse: collapse;">
<table class="nd-othertables_2" style="width:100%; border-collapse: collapse;">
<tr>
  <tr>
<th style="width:1%; vertical-align: middle; text-align: center;">PARAMETER NAME</th>
    <th style="width:1%; vertical-align: middle; text-align: center;">PARAMETER NAME</th>
<th style="width:1%; vertical-align: middle; text-align: center;">PARAMETER ID (RELATED AVL ID)</th>
    <th style="width:1%; vertical-align: middle; text-align: center;">PARAMETER ID (RELATED AVL ID)</th>
<th style="width:5%; vertical-align: middle; text-align: center;">DESCRIPTION</th>
    <th style="width:5%; vertical-align: middle; text-align: center;">DESCRIPTION</th>
<th style="width:6%; vertical-align: middle; text-align: center;">VALUES</th>
    <th style="width:6%; vertical-align: middle; text-align: center;">VALUES</th>
</tr>
  </tr>
<tr>
 
  <tr>
    <td>Private/Business mode</td>
    <td>391</td>
    <td>
Private/Business mode where:<br>
0 - Private mode OFF (Business mode ON);<br>
1 - Private mode ON (Business mode OFF);
    </td>
    <td>
Min: 0<br>
Default: 0<br>
Max: 1
    </td>
  </tr>
 
  <tr>
    <td>Private/Business mode triggers </td>
    <td>11811</td>
    <td>
Private/Business mode triggers. When a trigger is activated it activates the private mode. When the trigger goes low the private mode is turned OFF and device works in a business mode. Implemented using bit mask so that multiple choices could be selected where:<br>
0 - no trigger;<br>
1 - DIN1;<br>
2 - DIN2;<br>
3 - DIN3;<br>
4 - DIN4;
    </td>
    <td>
Min: 0<br>
Default: 0<br>
Max: 15
    </td>
  </tr>
 
  <tr>
    <td>Private/Business DOUT control </td>
    <td>11812</td>
    <td>
Private/Business DOUT. When the private mode is active the selected DOUT is turned ON, when the private mode is OFF DOUT needs to go low also. Parameter values:<br>
0 - DOUT control disabled;<br>
1 - DOUT1;<br>
2 - DOUT2;<br>
3 - DOUT3;<br>
4 - DOUT4;
    </td>
    <td>
Min: 0<br>
Default: 0<br>
Max: 4
    </td>
  </tr>
 
  <tr>
    <td>GPS data masking </td>
    <td>11813</td>
    <td>
GPS data masking describes how the GPS data is being masked when the device is in private mode. The parameter values are:<br>
0 - No masking;<br>
1 - GNSS data is sent as zero;<br>
2 - GNSS data is sent as last good known position;
    </td>
    <td>
Min: 0<br>
Default: 1<br>
Max: 2
    </td>
  </tr>
 
  <tr>
    <td>Private mode odometer stop </td>
    <td>11815</td>
    <td>
If enabled stops odometer calculation for Odometer and Trip scenarios in Private mode:<br>
0 - Disabled;<br>
1 - Enabled;
    </td>
    <td>
Min: 0<br>
Default: 0<br>
Max: 1
    </td>
  </tr>
 
  <tr>
    <td>Private mode deactivation triggers </td>
    <td>11816</td>
    <td>
Private mode deactivation triggers. When a trigger is activated it deactivates the private mode. Implemented using bit mask so that multiple choices could be selected where:<br>
0 - no trigger;<br>
1 - Towing detected;<br>
2 - Unplug detected;<br>
3 - Towing or Unplug detected;<br>
4 - Crash detected;<br>
5 - Towing or Crash detected;<br>
6 - Unplug or Crash detected;<br>
7 - Towing, Unplug or Crash detected;<br>
8 - Autogeofence triggered;<br>
9 - Towing or Autogeofence triggered;<br>
10 - Unplug or Autogeofence triggered;<br>
11 - Towing, Unplug or Autogeofence triggered;<br>
12 - Crash or Autogeofence triggered;<br>
13 - Towing, Crash or Autogeofence triggered;<br>
14 - Unplug, Crash or Autogeofence triggered;<br>
15 - Towing, Unplug, Crash or Autogeofence triggered;
    </td>
    <td>
Min: 0<br>
Default: 15<br>
Max: 15
    </td>
  </tr>
 
  <tr>
    <td>Private/Business mode Weekly Schedule Monday Enable </td>
    <td>11818</td>
    <td>
If enabled automatically disables private mode on Monday during configured time:<br>
0 - Disabled;<br>
1 - Enabled;
    </td>
    <td>
Min: 0<br>
Default: 1<br>
Max: 1
    </td>
  </tr>
 
  <tr>
    <td>Private/Business mode Weekly Schedule start time of a Business mode on Monday </td>
    <td>11819</td>
    <td>
Starting from a configured time until end time disables Private mode and enables Business mode on Monday;
    </td>
    <td>
Min: 0<br>
Default: 0<br>
Max: 1440
    </td>
  </tr>
 
  <tr>
    <td>Private/Business mode Weekly Schedule end time of a Business mode on Monday </td>
    <td>11820</td>
    <td>
Starting from a configured time until end time disables Private mode and enables Business mode on Monday;
    </td>
    <td>
Min: 0<br>
Default: 0<br>
Max: 1440
    </td>
  </tr>
 
  <tr>
    <td>Private/Business mode Weekly Schedule Tuesday Enable </td>
    <td>11821</td>
    <td>
If enabled automatically disables private mode on Tuesday during configured time:<br>
0 - Disabled;<br>
1 - Enabled;
    </td>
    <td>
Min: 0<br>
Default: 1<br>
Max: 1
    </td>
  </tr>
 
  <tr>
    <td>Private/Business mode Weekly Schedule start time of a Business mode on Tuesday </td>
    <td>11822</td>
    <td>
Starting from a configured time until end time disables Private mode and enables Business mode on Tuesday;
    </td>
    <td>
Min: 0<br>
Default: 0<br>
Max: 1440
    </td>
  </tr>
 
  <tr>
    <td>Private/Business mode Weekly Schedule end time of a Business mode on Tuesday </td>
    <td>11823</td>
    <td>
Starting from a configured time until end time disables Private mode and enables Business mode on Tuesday;
    </td>
    <td>
Min: 0<br>
Default: 0<br>
Max: 1440
    </td>
  </tr>
 
  <tr>
    <td>Private/Business mode Weekly Schedule Wednesday Enable </td>
    <td>11824</td>
    <td>
If enabled automatically disables private mode on Wednesday during configured time:<br>
0 - Disabled;<br>
1 - Enabled;
    </td>
    <td>
Min: 0<br>
Default: 1<br>
Max: 1
    </td>
  </tr>
 
  <tr>
    <td>Private/Business mode Weekly Schedule start time of a Business mode on Wednesday </td>
    <td>11825</td>
    <td>
Starting from a configured time until end time disables Private mode and enables Business mode on Wednesday;
    </td>
    <td>
Min: 0<br>
Default: 0<br>
Max: 1440
    </td>
  </tr>
 
  <tr>
    <td>Private/Business mode Weekly Schedule end time of a Business mode on Wednesday </td>
    <td>11826</td>
    <td>
Starting from a configured time until end time disables Private mode and enables Business mode on Wednesday;
    </td>
    <td>
Min: 0<br>
Default: 0<br>
Max: 1440
    </td>
  </tr>
 
  <tr>
    <td>Private/Business mode Weekly Schedule Thursday Enable </td>
    <td>11827</td>
    <td>
If enabled automatically disables private mode on Thursday during configured time:<br>
0 - Disabled;<br>
1 - Enabled;
    </td>
    <td>
Min: 0<br>
Default: 1<br>
Max: 1
    </td>
  </tr>
 
  <tr>
    <td>Private/Business mode Weekly Schedule start time of a Business mode on Thursday </td>
    <td>11828</td>
    <td>
Starting from a configured time until end time disables Private mode and enables Business mode on Thursday;
    </td>
    <td>
Min: 0<br>
Default: 0<br>
Max: 1440
    </td>
  </tr>
 
  <tr>
    <td>Private/Business mode Weekly Schedule end time of a Business mode on Thursday </td>
    <td>11829</td>
    <td>
Starting from a configured time until end time disables Private mode and enables Business mode on Thursday;
    </td>
    <td>
Min: 0<br>
Default: 0<br>
Max: 1440
    </td>
  </tr>
 
  <tr>
    <td>Private/Business mode Weekly Schedule Friday Enable </td>
    <td>11830</td>
    <td>
If enabled automatically disables private mode on Friday during configured time:<br>
0 - Disabled;<br>
1 - Enabled;
    </td>
    <td>
Min: 0<br>
Default: 1<br>
Max: 1
    </td>
  </tr>
 
  <tr>
    <td>Private/Business mode Weekly Schedule start time of a Business mode on Friday </td>
    <td>11831</td>
    <td>
Starting from a configured time until end time disables Private mode and enables Business mode on Friday;
    </td>
    <td>
Min: 0<br>
Default: 0<br>
Max: 1440
    </td>
  </tr>
 
  <tr>
    <td>Private/Business mode Weekly Schedule end time of a Business mode on Friday </td>
    <td>11832</td>
    <td>
Starting from a configured time until end time disables Private mode and enables Business mode on Friday;
    </td>
    <td>
Min: 0<br>
Default: 0<br>
Max: 1440
    </td>
  </tr>
 
  <tr>
    <td>Private/Business mode Weekly Schedule Saturday Enable </td>
    <td>11833</td>
    <td>
If enabled automatically disables private mode on Saturday during configured time:<br>
0 - Disabled;<br>
1 - Enabled;
    </td>
    <td>
Min: 0<br>
Default: 1<br>
Max: 1
    </td>
  </tr>
 
  <tr>
    <td>Private/Business mode Weekly Schedule start time of a Business mode on Saturday </td>
    <td>11834</td>
    <td>
Starting from a configured time until end time disables Private mode and enables Business mode on Saturday;
    </td>
    <td>
Min: 0<br>
Default: 0<br>
Max: 1440
    </td>
  </tr>
 
  <tr>
    <td>Private/Business mode Weekly Schedule end time of a Business mode on Saturday </td>
    <td>11835</td>
    <td>
Starting from a configured time until end time disables Private mode and enables Business mode on Saturday;
    </td>
    <td>
Min: 0<br>
Default: 0<br>
Max: 1440
    </td>
  </tr>


<td style="vertical-align: middle; text-align: center;"> Immobilizer </td>
  <tr>
<td style="vertical-align: middle; text-align: center;"> 1024800 <br> (248}  </td>
    <td>Private/Business mode Weekly Schedule Sunday Enable </td>
<td style="vertical-align: middle; text-align: center;"> Disables, or enables and sets priority of the event record generated upon successful or failed authorization attempts.Authorization source </td>
    <td>11836</td>
<td style="vertical-align: middle; text-align: left;"> '''0 =''' Disable scenario. <br>
    <td>
'''1 =''' Low priority Device makes an additional record with indication of event cause. <br>
If enabled automatically disables private mode on Sunday during configured time:<br>
'''2 =''' High priority - module makes additional record with high priority flag and sends event packet immediately to the server by GPRS.
0 - Disabled;<br>
</td>
1 - Enabled;
</tr>
    </td>
<tr>
    <td>
Min: 0<br>
Default: 1<br>
Max: 1
    </td>
  </tr>


<td style="vertical-align: middle; text-align: center;"> Authorization mode</td>
  <tr>
<td style="vertical-align: middle; text-align: center;"> 11703 </td>
    <td>Private/Business mode Weekly Schedule start time of a Business mode on Sunday </td>
<td style="vertical-align: middle; text-align: center;"> Selects singular or multiple types of authorization elements to be used. </td>
    <td>11837</td>
<td style="vertical-align: middle; text-align: left;"> '''0 =''' No authorization selected. <br>  
    <td>
'''1 =''' 1-Wire authorization selected. Driver is authorized via iButton or RFID tag.<br>
Starting from a configured time until end time disables Private mode and enables Business mode on Sunday;
</td>
    </td>
    <td>
Min: 0<br>
Default: 0<br>
Max: 1440
    </td>
  </tr>


</tr>  
  <tr>
<tr>
    <td>Private/Business mode Weekly Schedule end time of a Business mode on Sunday </td>
    <td>11838</td>
    <td>
Starting from a configured time until end time disables Private mode and enables Business mode on Sunday;
    </td>
    <td>
Min: 0<br>
Default: 0<br>
Max: 1440
    </td>
  </tr>


<td style="vertical-align: middle; text-align: center;"> Authorization persist duration (s)</td>
  <tr>
<td style="vertical-align: middle; text-align: center;"> 60068 </td>
    <td>Private/Business Weekly Schedule Time zone </td>
<td style="vertical-align: middle; text-align: center;"> Sets the time in seconds after the ignition is turned off before the driver's authorization is automatically revoked. </td>
    <td>11839</td>
<td style="vertical-align: middle; text-align: left;"> Minimum value '''= 1''' <br>
    <td>
Maximum value '''= 65535''' </td>
Time in minutes from GMT +00:00. Example: GMT +02:00 is 120;
    </td>
    <td>
Min: -720<br>
Default: 0<br>
Max: 1440
    </td>
  </tr>


</tr>  
  <tr>
    <td>Private/Business Weekly Schedule Daylight saving enable </td>
    <td>11840</td>
    <td>
If enabled automatically adjusts the time for daylight saving;<br>
0 - Disabled;<br>
1 - Enabled;
    </td>
    <td>
Min: 0<br>
Default: 0<br>
Max: 1
    </td>
  </tr>


<tr>
  <tr>
    <td>Private/Business Weekly Schedule Daylight saving start week </td>
    <td>11841</td>
    <td>
Sets the week when daylight saving starts:<br>
1 - First week of a month;<br>
2 - Second week of a month;<br>
3 - Third week of a month;<br>
4 - Fourth week of a month;<br>
5 - Last week of a month;
    </td>
    <td>
Min: 0<br>
Default: 0<br>
Max: 4
    </td>
  </tr>


<td style="vertical-align: middle; text-align: center;"> Bypass authorization </td>
  <tr>
<td style="vertical-align: middle; text-align: center;"> 11029</td>
    <td>Private/Business Weekly Schedule Daylight saving start month </td>
<td style="vertical-align: middle; text-align: center;"> Allows to bypass authorization when ignition is turned on and a set duration expires. </td>
    <td>11842</td>
<td style="vertical-align: middle; text-align: left;"> '''0 =''' Disabled <br>
    <td>
'''0-65535 =''' Enabled <br>
Sets the month when daylight saving starts. A month is represented by a number from 1 to 12;
Default value = '''0'''   </td>
    </td>
    <td>
Min: 1<br>
Default: 1<br>
Max: 12
    </td>
   </tr>


</tr>  
  <tr>
<tr>
    <td>Private/Business Weekly Schedule Daylight saving start weekday </td>
    <td>11843</td>
    <td>
Sets the weekday when daylight saving starts:<br>
1 - Monday;<br>
2 - Tuesday;<br>
3 - Wednesday;<br>
4 - Thursday;<br>
5 - Friday;<br>
6 - Saturday;<br>
7 - Sunday;
    </td>
    <td>
Min: 0<br>
Default: 0<br>
Max: 6
    </td>
  </tr>


<td style="vertical-align: middle; text-align: center;"> Bypass authorization timeout (s) </td>
  <tr>
<td style="vertical-align: middle; text-align: center;"> 11029</td>
    <td>Private/Business Weekly Schedule Daylight saving start time </td>
<td style="vertical-align: middle; text-align: center;"> Sets duration which starts when ignition is turned on. When duration expires immobilizer is turned off, even if the user was not authenticated. </td>
    <td>11844</td>
<td style="vertical-align: middle; text-align: left;"> Minimum value '''= 1''' <br>
    <td>
Maximum value '''= 65535''' </td>
Sets the time in minutes when daylight saving starts. A start time is represented by a number from 0 to 1440, where the number represents the minutes from midnight;
    </td>
    <td>
Min: 0<br>
Default: 0<br>
Max: 1440
    </td>
  </tr>


</tr>  
  <tr>
<tr>
    <td>Private/Business Weekly Schedule Daylight saving end week </td>
    <td>11845</td>
    <td>
Sets the week when daylight saving ends:<br>
1 - First week of a month;<br>
2 - Second week of a month;<br>
3 - Third week of a month;<br>
4 - Fourth week of a month;<br>
5 - Last week of a month;
    </td>
    <td>
Min: 0<br>
Default: 0<br>
Max: 4
    </td>
  </tr>


<td style="vertical-align: middle; text-align: center;"> Output control </td>
  <tr>
<td style="vertical-align: middle; text-align: center;"> 11702</td>
    <td>Private/Business Weekly Schedule Daylight saving end month </td>
<td style="vertical-align: middle; text-align: center;"> Selects which Digital Output is used to control the immobilizer relay. </td>
    <td>11846</td>
<td style="vertical-align: middle; text-align: left;"> '''0 =''' None DOUTs are disabled in this scenario. <br>
    <td>
'''1 =''' DOUT1 DOUT1 is enabled in this scenario. <br>
Sets the month when daylight saving ends. A month is represented by a number from 1 to 12;
'''2 =''' DOUT2 DOUT2 is enabled in this scenario. <br>
    </td>
'''3 =''' DOUT3 DOUT3 is enabled in this scenario. </td>
    <td>
Min: 1<br>
Default: 1<br>
Max: 12
    </td>
  </tr>


</tr>  
  <tr>
    <td>Private/Business Weekly Schedule Daylight saving end weekday </td>
    <td>11847</td>
    <td>
Sets the weekday when daylight saving ends:<br>
1 - Monday;<br>
2 - Tuesday;<br>
3 - Wednesday;<br>
4 - Thursday;<br>
5 - Friday;<br>
6 - Saturday;<br>
7 - Sunday;
    </td>
    <td>
Min: 0<br>
Default: 0<br>
Max: 6
    </td>
  </tr>
 
  <tr>
    <td>Private/Business Weekly Schedule Daylight saving end time </td>
    <td>11848</td>
    <td>
Sets the time in minutes when daylight saving ends. An end time is represented by a number from 0 to 1440, where the number represents the minutes from midnight;
    </td>
    <td>
Min: 0<br>
Default: 0<br>
Max: 1440
    </td>
  </tr>
 
  <tr>
    <td>Private/Business trigger type </td>
    <td>11849</td>
    <td>
Sets Private/Business trigger type:<br>
0 - External trigger such as DIN;<br>
1 - Weekly schedule;
    </td>
    <td>
Min: 0<br>
Default: 0<br>
Max: 1
    </td>
  </tr>
 
  <tr>
    <td>Private/Business DIN mode </td>
    <td>11851</td>
    <td>
Sets Private/Business DIN mode:<br>
0 - Button: triggers on state change Low -&gt; High;<br>
1 - Switch: triggers on state change Low -&gt; High and High -&gt; Low;
    </td>
    <td>
Min: 0<br>
Default: 0<br>
Max: 1
    </td>
  </tr>
</table>
</table>
=== <u> Limitations, Edge Cases & Additional Notes  </u> ===
* '''Installation Security:''' The overall effectiveness of the immobilizer is highly dependent on the secure and discreet installation of the control relay. If the wiring is easily accessible, it can be bypassed.

Latest revision as of 15:51, 18 March 2026

Private /Bussines mode

This feature enables employees to use company vehicles for personal purposes while maintaining compliance with EU General Data Protection Regulation requirements. When Private mode is active, the device masks location data and other sensitive information to prevent unauthorized tracking. Business mode restores full data visibility for standard fleet operations.

Private/Business Mode is used in fleet operations where employees may drive company vehicles for both work and personal needs. It helps ensure privacy during personal use by disabling location reporting, while still providing full tracking and operational data during business use.

In the TCT Features section, the Private / Business Mode allows the user to configure when the private mode should activate and deactivate by selecting one of the available feature triggers: a weekly scheduler or an external trigger type. Additionally, the user can define how the system should handle GNSS and odometer data while private mode is active. The feature also supports automatic deactivation of private mode when specific events are detected, such as Unplug, Towing, and other configured triggers.


Prerequisites and Important Settings

  • IMPORTANT: After exiting any sleep mode, DOUT and Private/Business state will automatically return to the values they had before entering the sleep mode.

Basic Operation

  • In the Private/Business window, the user can set the priority level used for sending messages (HIGH or LOW priority).
  • The DOUT control function allows indicating the state of Private Mode.When Private Mode is detected as ON, the configured DOUT output will also be switched ON.

DOUT State in Sleep mode

In different sleep modes DOUT behavior as well as Private/Business state are as follows:

Mode DOUT State Private/Business State
Online Sleep Last state before entering sleep Last state before entering sleep
Deep Sleep Last state before entering sleep Last state before entering Deep Sleep
Power Off Sleep DOUT is OFF Last state before entering Power Off Sleep

After exiting any sleep mode, DOUT and Private/Business state return to the state they were in before entering the sleep mode.

GNSS Data Masking defines how the device will handle location information (GNSS data) while in Private Mode:

  • No masking – GNSS information is not hidden.
  • GNSS data is sent as zero – In every record sent to the server, the GNSS fields (latitude, longitude, altitude, angle, and number of satellites) are set to “0”.Additionally, GSM Cell ID and GSM Area Code information will not be sent.
  • GNSS data is sent as last known good position –The last valid GNSS data (latitude, longitude, altitude) recorded before entering Private Mode is sent in every record.

The following I/O elements are sent as “0”:

  • GSM Cell ID (AVL ID 205)
  • GSM Area Code (AVL ID 206)
  • Private Mode Odometer Stop - when enabled, the device does not accumulate odometer data while Private Mode is active.
  • Private Business Deactivation – enables the system to automatically deactivate Private Mode based on selected scenarios.

Available scenarios include: Towing, Unplug, Crash, and Autogeofence. The user can select one, several, or all scenarios from the dropdown menu.

NOTE:
If Trigger type is set to External, the user must press the button or switch again to re enable Private Mode. If Trigger type is set to Weekly Schedule, the user must wait until the next scheduled activation time for Private Mode to be enabled again.

Feature Triggers

This section allows the user to configure the trigger logic that switches the feature between Private Mode and Business Mode.

Trigger Types
1. External
External triggers can be configured using Digital Inputs (DINs). When External is selected, the user can choose a specific DIN for the trigger logic. DIN Mode Options:

  • Button Mode

The selected DIN operates as a button.
Private Mode is activated or deactivated when the DIN status changes (triggered on the status transition).

  • Switch Mode

The selected DIN operates as a switch.
Private Mode is controlled based on the current DIN value:

  • DIN = HIGH → Private Mode enabled
  • DIN = LOW → Private Mode disabled

2. Weekly Schedule
A weekly schedule can be configured to automatically enable Private Mode at specific times based on the user defined schedule.

Weekly schedule

  • Enables automatic switching between Private Mode and Business Mode based on configured time, date, daylight saving rules, and time zones.
PARAMETER NAME PARAMETER ID (RELATED AVL ID) DESCRIPTION VALUES
Private/Business mode 391

Private/Business mode where:
0 - Private mode OFF (Business mode ON);
1 - Private mode ON (Business mode OFF);

Min: 0
Default: 0
Max: 1

Private/Business mode triggers 11811

Private/Business mode triggers. When a trigger is activated it activates the private mode. When the trigger goes low the private mode is turned OFF and device works in a business mode. Implemented using bit mask so that multiple choices could be selected where:
0 - no trigger;
1 - DIN1;
2 - DIN2;
3 - DIN3;
4 - DIN4;

Min: 0
Default: 0
Max: 15

Private/Business DOUT control 11812

Private/Business DOUT. When the private mode is active the selected DOUT is turned ON, when the private mode is OFF DOUT needs to go low also. Parameter values:
0 - DOUT control disabled;
1 - DOUT1;
2 - DOUT2;
3 - DOUT3;
4 - DOUT4;

Min: 0
Default: 0
Max: 4

GPS data masking 11813

GPS data masking describes how the GPS data is being masked when the device is in private mode. The parameter values are:
0 - No masking;
1 - GNSS data is sent as zero;
2 - GNSS data is sent as last good known position;

Min: 0
Default: 1
Max: 2

Private mode odometer stop 11815

If enabled stops odometer calculation for Odometer and Trip scenarios in Private mode:
0 - Disabled;
1 - Enabled;

Min: 0
Default: 0
Max: 1

Private mode deactivation triggers 11816

Private mode deactivation triggers. When a trigger is activated it deactivates the private mode. Implemented using bit mask so that multiple choices could be selected where:
0 - no trigger;
1 - Towing detected;
2 - Unplug detected;
3 - Towing or Unplug detected;
4 - Crash detected;
5 - Towing or Crash detected;
6 - Unplug or Crash detected;
7 - Towing, Unplug or Crash detected;
8 - Autogeofence triggered;
9 - Towing or Autogeofence triggered;
10 - Unplug or Autogeofence triggered;
11 - Towing, Unplug or Autogeofence triggered;
12 - Crash or Autogeofence triggered;
13 - Towing, Crash or Autogeofence triggered;
14 - Unplug, Crash or Autogeofence triggered;
15 - Towing, Unplug, Crash or Autogeofence triggered;

Min: 0
Default: 15
Max: 15

Private/Business mode Weekly Schedule Monday Enable 11818

If enabled automatically disables private mode on Monday during configured time:
0 - Disabled;
1 - Enabled;

Min: 0
Default: 1
Max: 1

Private/Business mode Weekly Schedule start time of a Business mode on Monday 11819

Starting from a configured time until end time disables Private mode and enables Business mode on Monday;

Min: 0
Default: 0
Max: 1440

Private/Business mode Weekly Schedule end time of a Business mode on Monday 11820

Starting from a configured time until end time disables Private mode and enables Business mode on Monday;

Min: 0
Default: 0
Max: 1440

Private/Business mode Weekly Schedule Tuesday Enable 11821

If enabled automatically disables private mode on Tuesday during configured time:
0 - Disabled;
1 - Enabled;

Min: 0
Default: 1
Max: 1

Private/Business mode Weekly Schedule start time of a Business mode on Tuesday 11822

Starting from a configured time until end time disables Private mode and enables Business mode on Tuesday;

Min: 0
Default: 0
Max: 1440

Private/Business mode Weekly Schedule end time of a Business mode on Tuesday 11823

Starting from a configured time until end time disables Private mode and enables Business mode on Tuesday;

Min: 0
Default: 0
Max: 1440

Private/Business mode Weekly Schedule Wednesday Enable 11824

If enabled automatically disables private mode on Wednesday during configured time:
0 - Disabled;
1 - Enabled;

Min: 0
Default: 1
Max: 1

Private/Business mode Weekly Schedule start time of a Business mode on Wednesday 11825

Starting from a configured time until end time disables Private mode and enables Business mode on Wednesday;

Min: 0
Default: 0
Max: 1440

Private/Business mode Weekly Schedule end time of a Business mode on Wednesday 11826

Starting from a configured time until end time disables Private mode and enables Business mode on Wednesday;

Min: 0
Default: 0
Max: 1440

Private/Business mode Weekly Schedule Thursday Enable 11827

If enabled automatically disables private mode on Thursday during configured time:
0 - Disabled;
1 - Enabled;

Min: 0
Default: 1
Max: 1

Private/Business mode Weekly Schedule start time of a Business mode on Thursday 11828

Starting from a configured time until end time disables Private mode and enables Business mode on Thursday;

Min: 0
Default: 0
Max: 1440

Private/Business mode Weekly Schedule end time of a Business mode on Thursday 11829

Starting from a configured time until end time disables Private mode and enables Business mode on Thursday;

Min: 0
Default: 0
Max: 1440

Private/Business mode Weekly Schedule Friday Enable 11830

If enabled automatically disables private mode on Friday during configured time:
0 - Disabled;
1 - Enabled;

Min: 0
Default: 1
Max: 1

Private/Business mode Weekly Schedule start time of a Business mode on Friday 11831

Starting from a configured time until end time disables Private mode and enables Business mode on Friday;

Min: 0
Default: 0
Max: 1440

Private/Business mode Weekly Schedule end time of a Business mode on Friday 11832

Starting from a configured time until end time disables Private mode and enables Business mode on Friday;

Min: 0
Default: 0
Max: 1440

Private/Business mode Weekly Schedule Saturday Enable 11833

If enabled automatically disables private mode on Saturday during configured time:
0 - Disabled;
1 - Enabled;

Min: 0
Default: 1
Max: 1

Private/Business mode Weekly Schedule start time of a Business mode on Saturday 11834

Starting from a configured time until end time disables Private mode and enables Business mode on Saturday;

Min: 0
Default: 0
Max: 1440

Private/Business mode Weekly Schedule end time of a Business mode on Saturday 11835

Starting from a configured time until end time disables Private mode and enables Business mode on Saturday;

Min: 0
Default: 0
Max: 1440

Private/Business mode Weekly Schedule Sunday Enable 11836

If enabled automatically disables private mode on Sunday during configured time:
0 - Disabled;
1 - Enabled;

Min: 0
Default: 1
Max: 1

Private/Business mode Weekly Schedule start time of a Business mode on Sunday 11837

Starting from a configured time until end time disables Private mode and enables Business mode on Sunday;

Min: 0
Default: 0
Max: 1440

Private/Business mode Weekly Schedule end time of a Business mode on Sunday 11838

Starting from a configured time until end time disables Private mode and enables Business mode on Sunday;

Min: 0
Default: 0
Max: 1440

Private/Business Weekly Schedule Time zone 11839

Time in minutes from GMT +00:00. Example: GMT +02:00 is 120;

Min: -720
Default: 0
Max: 1440

Private/Business Weekly Schedule Daylight saving enable 11840

If enabled automatically adjusts the time for daylight saving;
0 - Disabled;
1 - Enabled;

Min: 0
Default: 0
Max: 1

Private/Business Weekly Schedule Daylight saving start week 11841

Sets the week when daylight saving starts:
1 - First week of a month;
2 - Second week of a month;
3 - Third week of a month;
4 - Fourth week of a month;
5 - Last week of a month;

Min: 0
Default: 0
Max: 4

Private/Business Weekly Schedule Daylight saving start month 11842

Sets the month when daylight saving starts. A month is represented by a number from 1 to 12;

Min: 1
Default: 1
Max: 12

Private/Business Weekly Schedule Daylight saving start weekday 11843

Sets the weekday when daylight saving starts:
1 - Monday;
2 - Tuesday;
3 - Wednesday;
4 - Thursday;
5 - Friday;
6 - Saturday;
7 - Sunday;

Min: 0
Default: 0
Max: 6

Private/Business Weekly Schedule Daylight saving start time 11844

Sets the time in minutes when daylight saving starts. A start time is represented by a number from 0 to 1440, where the number represents the minutes from midnight;

Min: 0
Default: 0
Max: 1440

Private/Business Weekly Schedule Daylight saving end week 11845

Sets the week when daylight saving ends:
1 - First week of a month;
2 - Second week of a month;
3 - Third week of a month;
4 - Fourth week of a month;
5 - Last week of a month;

Min: 0
Default: 0
Max: 4

Private/Business Weekly Schedule Daylight saving end month 11846

Sets the month when daylight saving ends. A month is represented by a number from 1 to 12;

Min: 1
Default: 1
Max: 12

Private/Business Weekly Schedule Daylight saving end weekday 11847

Sets the weekday when daylight saving ends:
1 - Monday;
2 - Tuesday;
3 - Wednesday;
4 - Thursday;
5 - Friday;
6 - Saturday;
7 - Sunday;

Min: 0
Default: 0
Max: 6

Private/Business Weekly Schedule Daylight saving end time 11848

Sets the time in minutes when daylight saving ends. An end time is represented by a number from 0 to 1440, where the number represents the minutes from midnight;

Min: 0
Default: 0
Max: 1440

Private/Business trigger type 11849

Sets Private/Business trigger type:
0 - External trigger such as DIN;
1 - Weekly schedule;

Min: 0
Default: 0
Max: 1

Private/Business DIN mode 11851

Sets Private/Business DIN mode:
0 - Button: triggers on state change Low -> High;
1 - Switch: triggers on state change Low -> High and High -> Low;

Min: 0
Default: 0
Max: 1

Retrieved from "https://wiki.teltonika-gps.com/index.php?title=TEST-X&oldid=111960"