Jump to content
  • EN

TEST-DM: Difference between revisions

From Teltonika Telematics Wiki
← Older edit
VisualWikitext
No edit summary
 
(112 intermediate revisions by the same user not shown)
Line 1: Line 1:
[[Category:{{{model}}}]]
==Parameter list (short)==
https://wiki.teltonika-gps.com/view/FTC134_Features#Parameter_list


This page lists SMS/GPRS commands for the {{{model}}} device.
==Parameter list (full)==
Rules:
* Avoid inline formatting
* For DESCRIPTION and UNITS/VALUES, if there are multiple items - separate them by <nowiki><br></nowiki>
<!---
Table for full parameter lists (in separate param list pages).
FULL WIDTH (style=width:100%).
10, 15, 10, 33, 8, 8, 8, 8
--->
<table class="nd-othertables_2" style="width:100%; border-collapse: collapse;">
<tr>
<th style="width:10%;">PARAMETER ID</th>
<th style="width:15%;" ">NAME</th>
<th style="width:27%;">DESCRIPTION</th>
<th style="width:28%;">UNITS/VALUES</th>
<th style="width:5%;">TYPE</th>
<th style="width:5%;">MIN</th>
<th style="width:5%;">MAX</th>
<th style="width:5%;">DEFAULT</th>
</tr>
<tr>
<td>11816</td>
<td>Private mode deactivation triggers</td>
<td>Private mode deactivation triggers. When a trigger is activated it deactivates the private mode. Implemented using bit mask so that multiple choices could be selected.</td>
<td>0 - no trigger; <br>1 - Towing detected; <br>2 - Unplug detected; <br>3 - Towing or Unplug detected; <br>4 - Crash detected; <br>5 - Towing or Crash detected; <br>6 - Unplug or Crash detected; <br>7 - Towing, Unplug or Crash detected; <br>8 - Autogeofence triggered; <br>9 - Towing or Autogeofence triggered; <br>10 - Unplug or Autogeofence triggered; <br>11 - Towing, Unplug or Autogeofence triggered; <br>12 - Crash or Autogeofence triggered; <br>13 - Towing, Crash or Autogeofence triggered; <br>14 - Unplug, Crash or Autogeofence triggered; <br>15 - Towing, Unplug, Crash or Autogeofence triggered</td>
<td>Uint16</td>
<td>0</td>
<td>15</td>
<td>15</td>
</tr>
<tr>
<td>900007</td>
<td>Speed limit</td>
<td>Speed threshold which determines when to generate speeding start/stop events.</td>
<td>km/h</td>
<td>Uint16</td>
<td>0</td>
<td>1000</td>
<td>0</td>
</tr>
<tr>
<td>1024900</td>
<td>Network jamming detection</td>
<td>The feature detects GSM jamming, initiates actions using an output, and helps to prevent vehicle theft when jamming devices are used. A low signal level is not equal to GSM jamming, the device recognizes these events.</td>
<td>0 = Disable; <br>1 = Low priority; <br>2 = High priority</td>
<td>Uint8</td>
<td>0</td>
<td>2</td>
<td>0</td>
</tr>
<tr>
<td>899901 (DOUT1)<br>899911 (DOUT2)<br>899921 (DOUT3)</td>
<td>Activation timing</td>
<td>Select Activation timing when the event will be triggered.<br>Control mode - Persistent:
*Outside activation timing, selected DOUT will start being controlled while the device is outside of the geozone and will stop being controlled while the device is inside of the geozone. If the device is outside of multiple geozones, selected DOUT will continue being controlled until the device enters one of the geozones.
*Inside activation timing, selected DOUT will start being controlled while the device is inside the geozone and will stop being controlled while the device is outside of the geozone. If Output control according to speed limit is set, selected DOUT will start being controlled while the device is exceeding the speed limit inside the geozone. If the device is inside multiple geozones, selected DOUT will continue being controlled until the device is outside of all geozones (or stops exceeding the speed limit, if configured).
Control mode - Event:
*Outside activation timing, selected DOUT will be triggered once you exit the configured geozone.
*Inside activation timing, selected DOUT will be triggered once you enter the configured geozone.</td>
<td>1=Outside<br>2=Inside</td>
<td>Uint8</td>
<td>1</td>
<td>2</td>
<td>1</td>
</tr>
</table>


General information:
==AVL ID list==
* A single SMS/GPRS command is limited to 160 characters.
Rules:
* All commands are case-sensitive.
* Avoid inline formatting
* GPRS commands require the [[Codec#Codec_12|Codec 12 protocol]].
* For DESCRIPTION, if there are multiple items - separate them by <nowiki><br></nowiki>
* SMS/GPRS command functioning in Deep Sleep - because the GSM/GPRS module is disabled in Deep Sleep, the device will receive your SMS message only when it exists Deep Sleep (and GPRS commands will not be received at all).
* Do not leave cells empty - write "-" if there is no value
==Command Syntax==
<table class="nd-othertables_2" style="width:100%; border-collapse: collapse;">
[[File:smsgprscommand_EXAMPLE.png|300px|right|alt=SMS/GPRS command example]]
<tr>
'''Before all SMS/GPRS commands, enter the password OR a whitespace (when password is not set).'''
<th style="width:10%">AVL ID</th>
<th style="width:15%">NAME</th>
<th style="width:5%">BYTES</th>
<th style="width:5%">TYPE</th>
<th style="width:5%">MIN</th>
<th style="width:5%">MAX</th>
<th style="width:5%">MULTIPLIER</th>
<th style="width:5%">UNITS</th>
<th style="width:55%;">DESCRIPTION</th>
</tr>
<tr>
<td>16</td>
<td>Total Odometer</td>
<td>4</td>
<td>Unsigned</td>
<td>0</td>
<td>2147483647</td>
<td>-</td>
<td>m</td>
<td>Virtual odometer value</td>
</tr>
<tr>
<td>69</td>
<td>GNSS Status</td>
<td>1</td>
<td>Unsigned</td>
<td>0</td>
<td>3</td>
<td>-</td>
<td>-</td>
<td>0 - GNSS OFF; <br>1 - GNSS ON with fix; <br>2 - GNSS ON without fix; <br>3 - GNSS sleep</td>
</tr>
<tr>
<td>181</td>
<td>GNSS PDOP</td>
<td>2</td>
<td>Unsigned</td>
<td>0</td>
<td>500</td>
<td>-</td>
<td>m</td>
<td>GNSS position dilution of precision. Normal PDOP is below 3 – the lower the number, the more accurate reported location is.</td>
</tr>
<tr>
<td>13377</td>
<td>Neighbouring Cell 2 RSSI</td>
<td>1</td>
<td>Unsigned</td>
<td>0</td>
<td>63</td>
<td>-</td>
<td>dB</td>
<td>Signal strength of Cell #2. Included in records as Permanent I/O when LBS mode is configured as "Location Source".</td>
</tr>
<tr>
<td>157</td>
<td>Manual Geofence Speeding event</td>
<td>1</td>
<td>Unsigned</td>
<td>0</td>
<td>1</td>
<td>-</td>
<td>-</td>
<td>0 - Speeding stop event; <br>1 - Speeding start event</td>
</tr>
</table>


General command structure:
==Pinout==
<password><space><command><space><argument1><space><argument2>...
Rules:
Examples:
* Avoid inline formatting, except for COLOR
* ''getinfo'' command, password "1234": <code>1234 getinfo</code>
** Example of multicolor formatting <nowiki><td style="color:lightgray;">'''White'''<span style="color:green">'''Green'''</span></td></nowiki>
* ''getinfo'' command, password not set: <code>&nbsp;getinfo</code> (note the whitespace before command)
*** user the same color name for "color", except use "color:lightgray" for white
* ''readavl'' command, password "1234", single argument: <code>1234 readavl 69</code>
<table style="width:100%; border-collapse:collapse;">
* ''setdigout'' command, password not set, multiple arguments: <code>&nbsp;setdigout 01 30 ? ? 20</code> (note the whitespace before command)
<!---nested table with two columns: left for pin table, right for pinout image --->
'''''Note!''' In some Apple iOS devices, any whitespace in the beginning of a message is automatically removed under certain conditions. This may affect SMS parsing in the receiving device.''
<tr>
==Command List==
<!--- start of left column--->
===Default Commands===
<td style="width:60%; vertical-align:top; padding-right:4px;">
These are the default SMS/GPRS commands, applicable for most Teltonika devices.
<table class="nd-othertables_2" style="width:100%; border-collapse: collapse;">
<table class="nd-othertables_2" style="width:100%; border-collapse: collapse;">
<tr>
  <th style="width:10%;">PIN</th>
  <th style="width:15%;">COLOR</th>
  <th style="width:25%;">NAME</th>
  <th style="width:50%;">DESCRIPTION</th>
</tr>
<tr>
<td>1</td>
<td style="color:red;">'''Red'''</td>
<td>VCC</td>
<td>Power supply (+8-32V V DC) (+)</td>
</tr>
<tr>
<td>2</td>
<td style="color:gray">'''Gray'''</td>
<td>DOUT3</td>
<td>Digital output channel 3</td>
</tr>
<tr>
<tr>
<th style="width:20%; vertical-align: middle; text-align: left;">COMMAND</th>
<td>3</td>
<th style="width:45%; vertical-align: middle; text-align: left;">DESCRIPTION</th>
<td style="color:lightgray">'''White'''</td>
<th style="width:35%; vertical-align: middle; text-align: left;">SYNTAX EXAMPLE</th>
<td>DIN3/AIN3</td>
<td>Digital input channel 3 / Analog input channel 3</td>
</tr>
</tr>
<tr>
<tr>
<td style="vertical-align: middle; text-align: left;">[[SMS/GPRS command - allver|allver]]</td>
<td>4</td>
<td style="vertical-align: middle; text-align: left;">Returns information about device firmware and hardware.
<td style="color:lightgray;">'''White'''<span style="color:green">'''Green'''</span></td>
<td>DIN4/AIN4/DGS</td>
<td>Digital input channel 4 / Analog input channel 4 / Ground sense</td>
</tr>
<tr>
<td>5</td>
<td style="color:yellow;">'''Yellow'''</td>
<td>DIN1/AIN1</td>
<td>Digital input 1 / Analog input 1</td>
</tr>
<tr>
<td>6</td>
<td style="color:lightgray;">'''White'''<span style="color:blue;">'''Blue'''</span></td>
<td>INPUT6</td>
<td>TX EXT (LVCAN – TX)</td>
</tr>
<tr>
<td>7</td>
<td style="color:black;">'''Black'''</td>
<td>GND</td>
<td>Ground (-)</td>
</tr>
<tr>
<td>8</td>
<td style="color:lightgray;">'''White'''<span style="color:orange;">'''Orange'''</span></td>
<td>DOUT1</td>
<td>Digital output channel 1</td>
</tr>
<tr>
<td>9</td>
<td style="color:purple;">'''Purple'''</td>
<td>DOUT2</td>
<td>Digital output channel 2</td>
</tr>
<tr>
<td>10</td>
<td style="color:blue;">'''Blue'''</td>
<td>1WIRE POWER</td>
<td> +3.8 V output for 1-Wire devices</td>
</tr>
<tr>
<td>11</td>
<td style="color:green;">'''Green'''</td>
<td>DIN2/AIN2/1WIRE DATA</td>
<td>Digital input channel 2 / Analog input 2 / Data for 1-Wire devices</td>
</tr>
<tr>
<td>12</td>
<td style="color:lightgray;">'''White'''<span style="color:yellow;">'''Yellow'''</span></td>
<td>INPUT5</td>
<td>RX EXT (LVCAN – RX)</td>
</tr>
</table>
</td>
<!--- start of right column--->
<td style="width:40%; vertical-align:top; horizontal-align:right; padding-left:4px;">
[[Image:FTC134_pinout.png|frameless|500px]]
</td>
</td>
<td style="vertical-align: middle; text-align: left;"><code>allver</code></td>
</tr>
</tr>
<!--- end of the whole nested table--->
</table>
==PCN==
Rules:
* Avoid inline formatting
<table class="nd-othertables_2" style="width:100%; border-collapse: collapse;">
<tr>
<tr>
<td style="vertical-align: middle; text-align: left;">[[SMS/GPRS command - battery|battery]]</td>
<th>ITEM</th>
<td style="vertical-align: middle; text-align: left;">Returns information about battery status. If battery is not present voltage and current will return zero value.</td>
<th>iNFORMATION</th>
<td style="vertical-align: middle; text-align: left;"><code>battery</code></td>
</tr>
</tr>
<tr>
<tr>
<td style="vertical-align: middle; text-align: left;">[[SMS/GPRS command - cpureset|cpureset]]</td>
<th colspan="2" style="text-align:left;">Change details</th>
<td style="vertical-align: middle; text-align: left;">Restarts device.</td>
<td style="vertical-align: middle; text-align: left;"><code>cpureset</code></td>
</tr>
</tr>
<tr>
<tr>
<td style="vertical-align: middle; text-align: left;">[[SMS/GPRS command - deleterecords|deleterecords]]</td>
<td>Change type</td>
<td style="vertical-align: middle; text-align: left;">Deletes all records inside device.</td>
<td>Firmware update</td>
<td style="vertical-align: middle; text-align: left;"><code>deleterecords</code></td>
</tr>
</tr>
<tr>
<tr>
<td style="vertical-align: middle; text-align: left;">[[SMS/GPRS command - delkey|delkey]]</td>
<td>Description</td>
<td style="vertical-align: middle; text-align: left;">Deletes current primary key.</td>
<td>Key improvements from last production firmware are listed in errata: [[{{{model}}} Firmware Changelog]]</td>
<td style="vertical-align: middle; text-align: left;"><code>syntax</code></td>
</tr>
</tr>
<tr>
<tr>
<td style="vertical-align: middle; text-align: left;">[[SMS/GPRS command - delsecondkey|delsecondkey]]</td>
<td>Previous firmware version</td>
<td style="vertical-align: middle; text-align: left;">Deletes current recovery key.</td>
<td>0.26.2</td>
<td style="vertical-align: middle; text-align: left;"><code>delkey <old_keyword></code></td>
</tr>
</tr>
<tr>
<tr>
<td style="vertical-align: middle; text-align: left;">[[SMS/GPRS command - fwstats|fwstats]]</td>
<td>New firmware version</td>
<td style="vertical-align: middle; text-align: left;">Information regarding firmware update statistics.</td>
<td>2.1.1</td>
<td style="vertical-align: middle; text-align: left;"><code>fwstats</code></td>
</tr>
</tr>
<tr>
<tr>
<td style="vertical-align: middle; text-align: left;">[[SMS/GPRS command - getgps|getgps]]</td>
<td>Change reason</td>
<td style="vertical-align: middle; text-align: left;">Returns information string regarding GNSS.</td>
<td>{{{model}}} base firmware version update</td>
<td style="vertical-align: middle; text-align: left;"><code>getgps</code></td>
</tr>
</tr>
<tr>
<tr>
<td style="vertical-align: middle; text-align: left;">[[SMS/GPRS command - getimeiccid|getimeiccid]]</td>
<td>Product release date</td>
<td style="vertical-align: middle; text-align: left;">Returns information about modem IMEI and SIM CCID.</td>
<td>2025 June</td>
<td style="vertical-align: middle; text-align: left;"><code>getimeiccid</code></td>
</tr>
</tr>
<tr>
<tr>
<td style="vertical-align: middle; text-align: left;">[[SMS/GPRS command - getimsi|getimsi]]</td>
<th colspan="2" style="text-align:left;">Affected products</th>
<td style="vertical-align: middle; text-align: left;">Returns IMSI code of currently used SIM card.</td>
<td style="vertical-align: middle; text-align: left;"><code>getimsi</code></td>
</tr>
</tr>
<tr>
<tr>
<td style="vertical-align: middle; text-align: left;">[[SMS/GPRS command - getinfo|getinfo]]</td>
<td>Model</td>
<td style="vertical-align: middle; text-align: left;">Returns information string.</td>
<td>{{{model}}}</td>
<td style="vertical-align: middle; text-align: left;"><code>getinfo</code></td>
</tr>
</tr>
<tr>
<tr>
<td style="vertical-align: middle; text-align: left;">[[SMS/GPRS command - getops|getops]]</td>
<td>Affected order codes</td>
<td style="vertical-align: middle; text-align: left;">Returns list of currently visible operators.</td>
<td>All order codes</td>
<td style="vertical-align: middle; text-align: left;"><code>getops</code></td>
</tr>
</tr>
<tr>
<tr>
<td style="vertical-align: middle; text-align: left;">[[SMS/GPRS command - getparam|getparam]]</td>
<td>Order code change</td>
<td style="vertical-align: middle; text-align: left;">Get configured parameter value.</td>
<td>New firmware version</td>
<td style="vertical-align: middle; text-align: left;"><code>getparam <param_id1>;<param_id2>;...</code></td>
</tr>
</tr>
<tr>
<tr>
<td style="vertical-align: middle; text-align: left;">[[SMS/GPRS command - getrecord|getrecord]]</td>
<th colspan="2" style="text-align:left;">Impact</th>
<td style="vertical-align: middle; text-align: left;">Generates a high priority record so force device to send all records to the server.</td>
<td style="vertical-align: middle; text-align: left;"><code>getrecord</code></td>
</tr>
</tr>
<tr>
<tr>
<td style="vertical-align: middle; text-align: left;">[[SMS/GPRS command - getstatus|getstatus]]</td>
<td>Risk assessment</td>
<td style="vertical-align: middle; text-align: left;">Get status about device.</td>
<td>During the transition period, clients might receive devices manufactured with the previous firmware version.</td>
<td style="vertical-align: middle; text-align: left;"><code>getstatus</code></td>
</tr>
</table>
 
==LED Behavior==
Rules:
* Avoid inline formatting
* Do not leave cells empty - write "-" if there is no value
<table class="nd-othertables_2" style="width:100%; border-collapse: collapse;">
<tr>
<th></th>
<th>'''STATUS LED (WHITE)'''</th>
<th>'''NAVIGATION LED (BLUE)'''</th>
</tr>
</tr>
<tr>
<tr>
<td style="vertical-align: middle; text-align: left;">[[SMS/GPRS command - getver|getver]]</td>
<td>ON</td>
<td style="vertical-align: middle; text-align: left;">Returns code version, device IMEI, modem app version, RTC time, Init time, etc.</td>
<td>Device is working, GPRS session not active</td><td>GNSS is working, position fix not acquired</td></tr><tr><td>BLINK every 1 second</td>
<td style="vertical-align: middle; text-align: left;"><code>getver</code></td>
<td>Device is working, GPRS session active</td>
<td> -</td>
</tr>
</tr>
<tr>
<tr>
<td style="vertical-align: middle; text-align: left;">[[SMS/GPRS command - ggps|ggps]]</td>
<td>SHORT BLINK every 1 second</td>
<td style="vertical-align: middle; text-align: left;">Returns information about current date, time, speed, device coordinates and a link to Google Maps with current position.</td>
<td> -</td>
<td style="vertical-align: middle; text-align: left;"><code>ggps</code></td>
<td>GNSS is working, position fix acquired</td>
</tr>
</tr>
<tr>
<tr>
<td style="vertical-align: middle; text-align: left;">[[SMS/GPRS command - readavl|readavl]]</td>
<td>OFF</td>
<td style="vertical-align: middle; text-align: left;">Returns information string regarding AVL ID value.</td>
<td>Device is not working</td>
<td style="vertical-align: middle; text-align: left;"><code>readavl <AVL_ID></code></td>
<td>GNSS is powered off (device not working or in sleep mode)</td>
</tr>
</tr>
</table>
==Electrical Specifications==
Rules:
* Avoid inline formatting
* Leave cells without any data empty (''as opposed to other tables'')
<table class="nd-othertables_2" style="width:60%; border-collapse: collapse;">
<tr>
<th style="width:55%">SPECIFICATION</th>
<th style="width:15%">MIN</th>
<th style="width:15%">MAX</th>
<th style="width:15%">UNITS</th>
</tr>
<tr>
<th colspan="4" style="text-align:left;">Supply</th><td></td></tr>
<tr>
<td>Supply  Voltage</td>
<td>10</td>
<td>97</td>
<td>V</td>
</tr>
<tr>
<td>Supply Protection Voltage  (Absolute Maximum Ratings, Reverse/Forward Polarity)</td>
<td>-100</td>
<td>100</td>
<td>V</td>
</tr>
<tr>
<th colspan="4" style="text-align:left;">Inputs</th><td></td></tr>
<tr>
<td>Analog Input 1 Voltage</td>
<td>0</td>
<td>100</td>
<td>V</td>
</tr>
<tr>
<td>Analog Input 1 Current (At  100V Input)</td>
<td></td>
<td>0.7</td>
<td>mA</td>
</tr>
<tr>
<td>Digital Input 1 Voltage (DIN  state 0->1)</td>
<td>2.5</td>
<td>100</td>
<td>V</td>
</tr>
<tr>
<td>Digital Input 1 Current (At  100V Input)</td>
<td></td>
<td>0.7</td>
<td>mA</td>
</tr>
<tr>
<th colspan="4" style="text-align:left;">Outputs</th><td></td></tr>
<tr>
<tr>
<td style="vertical-align: middle; text-align: left;">[[SMS/GPRS command - setkey|setkey]]</td>
<td>Digital Output 1 Voltage</td>
<td style="vertical-align: middle; text-align: left;">Set new or change current primary key.</td>
<td>0</td>
<td style="vertical-align: middle; text-align: left;"><code>setkey <old_keyword> <new_keyword></code></td>
<td>100</td>
<td>V</td>
</tr>
</tr>
<tr>
<tr>
<td style="vertical-align: middle; text-align: left;">[[SMS/GPRS command - setparam|setparam]]</td>
<td>Digital Output 1 Current</td>
<td style="vertical-align: middle; text-align: left;">Change configurable parameter value.</td>
<td>0</td>
<td style="vertical-align: middle; text-align: left;"><code>setparam <param_id1>:<value>;<param_id2>:<value>;...</code></td>
<td>500</td>
<td>mA</td>
</tr>
</tr>
<tr>
<tr>
<td style="vertical-align: middle; text-align: left;">[[SMS/GPRS command - setsecondkey|setsecondkey]]</td>
<td>Digital Output 1 Overcurrent  Threshold</td>
<td style="vertical-align: middle; text-align: left;">Set new or change current recovery key.</td>
<td></td>
<td style="vertical-align: middle; text-align: left;"><code>setsecondkey <old_keyword> <new_keyword></code></td>
<td>800</td>
<td>mA</td>
</tr>
</tr>
<tr>
<tr>
<td style="vertical-align: middle; text-align: left;">[[SMS/GPRS command - towingreact|towingreact]]</td>
<td>Digital Output 2 Voltage</td>
<td style="vertical-align: middle; text-align: left;">Reactivates towing Detection scenario. Intended for use in case of a fake towing detection event.</td>
<td>0</td>
<td style="vertical-align: middle; text-align: left;"><code>towingreact</code></td>
<td>100</td>
<td>V</td>
</tr>
</tr>
<tr>
<tr>
<td style="vertical-align: middle; text-align: left;">[[SMS/GPRS command - wdlog|wdlog]]</td>
<td>Digital Output 2 Current</td>
<td style="vertical-align: middle; text-align: left;">Returns information about the recent watchdog events.</td>
<td>0</td>
<td style="vertical-align: middle; text-align: left;"><code>wdlog</code></td>
<td>500</td>
<td>mA</td>
</tr>
</tr>
<tr>
<tr>
<td style="vertical-align: middle; text-align: left;">[[SMS/GPRS command - web_connect|web_connect]]</td>
<td>Digital Output 2 Overcurrent  Threshold</td>
<td style="vertical-align: middle; text-align: left;">Triggers FOTA service/connection.</td>
<td></td>
<td style="vertical-align: middle; text-align: left;"><code>web_connect</code></td>
<td>800</td>
<td>mA</td>
</tr>
</tr>
</table>
</table>

Latest revision as of 14:50, 27 March 2026

Parameter list (short)

https://wiki.teltonika-gps.com/view/FTC134_Features#Parameter_list

Parameter list (full)

Rules:

  • Avoid inline formatting
  • For DESCRIPTION and UNITS/VALUES, if there are multiple items - separate them by <br>
PARAMETER ID NAME DESCRIPTION UNITS/VALUES TYPE MIN MAX DEFAULT
11816 Private mode deactivation triggers Private mode deactivation triggers. When a trigger is activated it deactivates the private mode. Implemented using bit mask so that multiple choices could be selected. 0 - no trigger;
1 - Towing detected;
2 - Unplug detected;
3 - Towing or Unplug detected;
4 - Crash detected;
5 - Towing or Crash detected;
6 - Unplug or Crash detected;
7 - Towing, Unplug or Crash detected;
8 - Autogeofence triggered;
9 - Towing or Autogeofence triggered;
10 - Unplug or Autogeofence triggered;
11 - Towing, Unplug or Autogeofence triggered;
12 - Crash or Autogeofence triggered;
13 - Towing, Crash or Autogeofence triggered;
14 - Unplug, Crash or Autogeofence triggered;
15 - Towing, Unplug, Crash or Autogeofence triggered		 Uint16 0 15 15
900007 Speed limit Speed threshold which determines when to generate speeding start/stop events. km/h Uint16 0 1000 0
1024900 Network jamming detection The feature detects GSM jamming, initiates actions using an output, and helps to prevent vehicle theft when jamming devices are used. A low signal level is not equal to GSM jamming, the device recognizes these events. 0 = Disable;
1 = Low priority;
2 = High priority		 Uint8 0 2 0
899901 (DOUT1)
899911 (DOUT2)
899921 (DOUT3)		 Activation timing Select Activation timing when the event will be triggered.
Control mode - Persistent:
  • Outside activation timing, selected DOUT will start being controlled while the device is outside of the geozone and will stop being controlled while the device is inside of the geozone. If the device is outside of multiple geozones, selected DOUT will continue being controlled until the device enters one of the geozones.
  • Inside activation timing, selected DOUT will start being controlled while the device is inside the geozone and will stop being controlled while the device is outside of the geozone. If Output control according to speed limit is set, selected DOUT will start being controlled while the device is exceeding the speed limit inside the geozone. If the device is inside multiple geozones, selected DOUT will continue being controlled until the device is outside of all geozones (or stops exceeding the speed limit, if configured).

Control mode - Event:

  • Outside activation timing, selected DOUT will be triggered once you exit the configured geozone.
  • Inside activation timing, selected DOUT will be triggered once you enter the configured geozone.
 1=Outside
2=Inside		 Uint8 1 2 1

AVL ID list

Rules:

  • Avoid inline formatting
  • For DESCRIPTION, if there are multiple items - separate them by <br>
  • Do not leave cells empty - write "-" if there is no value
AVL ID NAME BYTES TYPE MIN MAX MULTIPLIER UNITS DESCRIPTION
16 Total Odometer 4 Unsigned 0 2147483647 - m Virtual odometer value
69 GNSS Status 1 Unsigned 0 3 - - 0 - GNSS OFF;
1 - GNSS ON with fix;
2 - GNSS ON without fix;
3 - GNSS sleep
181 GNSS PDOP 2 Unsigned 0 500 - m GNSS position dilution of precision. Normal PDOP is below 3 – the lower the number, the more accurate reported location is.
13377 Neighbouring Cell 2 RSSI 1 Unsigned 0 63 - dB Signal strength of Cell #2. Included in records as Permanent I/O when LBS mode is configured as "Location Source".
157 Manual Geofence Speeding event 1 Unsigned 0 1 - - 0 - Speeding stop event;
1 - Speeding start event

Pinout

Rules:

  • Avoid inline formatting, except for COLOR
    • Example of multicolor formatting <td style="color:lightgray;">'''White'''<span style="color:green">'''Green'''</span></td>
      • user the same color name for "color", except use "color:lightgray" for white
PIN COLOR NAME DESCRIPTION
1 Red VCC Power supply (+8-32V V DC) (+)
2 Gray DOUT3 Digital output channel 3
3 White DIN3/AIN3 Digital input channel 3 / Analog input channel 3
4 WhiteGreen DIN4/AIN4/DGS Digital input channel 4 / Analog input channel 4 / Ground sense
5 Yellow DIN1/AIN1 Digital input 1 / Analog input 1
6 WhiteBlue INPUT6 TX EXT (LVCAN – TX)
7 Black GND Ground (-)
8 WhiteOrange DOUT1 Digital output channel 1
9 Purple DOUT2 Digital output channel 2
10 Blue 1WIRE POWER +3.8 V output for 1-Wire devices
11 Green DIN2/AIN2/1WIRE DATA Digital input channel 2 / Analog input 2 / Data for 1-Wire devices
12 WhiteYellow INPUT5 RX EXT (LVCAN – RX)

PCN

Rules:

  • Avoid inline formatting
ITEM iNFORMATION
Change details
Change type Firmware update
Description Key improvements from last production firmware are listed in errata: [[{{{model}}} Firmware Changelog]]
Previous firmware version 0.26.2
New firmware version 2.1.1
Change reason {{{model}}} base firmware version update
Product release date 2025 June
Affected products
Model {{{model}}}
Affected order codes All order codes
Order code change New firmware version
Impact
Risk assessment During the transition period, clients might receive devices manufactured with the previous firmware version.

LED Behavior

Rules:

  • Avoid inline formatting
  • Do not leave cells empty - write "-" if there is no value
STATUS LED (WHITE) NAVIGATION LED (BLUE)
ON Device is working, GPRS session not activeGNSS is working, position fix not acquired
BLINK every 1 second Device is working, GPRS session active -
SHORT BLINK every 1 second - GNSS is working, position fix acquired
OFF Device is not working GNSS is powered off (device not working or in sleep mode)

Electrical Specifications

Rules:

  • Avoid inline formatting
  • Leave cells without any data empty (as opposed to other tables)
SPECIFICATION MIN MAX UNITS
Supply
Supply Voltage 10 97 V
Supply Protection Voltage (Absolute Maximum Ratings, Reverse/Forward Polarity) -100 100 V
Inputs
Analog Input 1 Voltage 0 100 V
Analog Input 1 Current (At 100V Input) 0.7 mA
Digital Input 1 Voltage (DIN state 0->1) 2.5 100 V
Digital Input 1 Current (At 100V Input) 0.7 mA
Outputs
Digital Output 1 Voltage 0 100 V
Digital Output 1 Current 0 500 mA
Digital Output 1 Overcurrent Threshold 800 mA
Digital Output 2 Voltage 0 100 V
Digital Output 2 Current 0 500 mA
Digital Output 2 Overcurrent Threshold 800 mA
Retrieved from "https://wiki.teltonika-gps.com/index.php?title=TEST-DM&oldid=112330"