FMx150 Tachograph solution: Difference between revisions

← Older edit

VisualWikitext

@@ Line 22: / Line 22: @@
 *[[#Siemens_VDO_Digital_Tachograph|Siemens VDO Digital Tachograph]]
 *[[#Stoneridge Tachograph|Stoneridge Tachograph]]
-*[[#Intellic EFAS version 4|Intellic EFAS version 4]]
 ===Siemens VDO Digital Tachograph===
-Siemens VDO Digital Tachograph – DTCO 1381 (release 1.3a, 1.4 or later):
+Siemens VDO Digital Tachograph – DTCO 4.0 or later:
 the version can be checked on tachograph or in the printout (Technical data: printout -> vehicle -> techn. data) as shown in pictures below:<br />
@@ Line 39: / Line 38: @@
 ===Stoneridge Tachograph===
-Stoneridge Tachograph – SE5000 (release 7.1 or later). The version can be checked on tachograph or in the printout (Daily Driver printout on the left: PRINT -> 24h card/ Technical data on the right: PRINT -> technical data) as shown in pictures below:<br />
+Stoneridge Tachograph – SE5000 release 8.0 or later. The version can be checked on tachograph or in the printout (Daily Driver printout on the left: PRINT -> 24h card/ Technical data on the right: PRINT -> technical data) as shown in pictures below:<br />
 [[Image:STONERIDGE_1.3.png|750px|center]]
 Tachograph part number is indicated in blue <span style="color:#007FFF">900588RA/37R01</span> "RA" indicates that this is 8th revision. Other revisions can be checked by looking at number after "R", for example R7.1 - Revision 7.1. You can use TachoLookup([https://tacholookup.teltonika.lt/ Tachograph Lookup]) to doublecheck if tachograph is supported.
-===Intellic EFAS version 4===
-Intellic EFAS 4 - we support EFAS-4 tachographs from version 4.5. Supported tachographs can be identified by the first 6 digits of “EU-serial code” and should start with: E4T010, E4T012, E5T018, E5T020 as shown in the printout (Technical data: Printout ->Technical data) example bellow:<br />
-[[Image:INTELLIC 1.png|600px|center]]
-Required numbers are indicated in blue color <span style="color:#007FFF">E4T010 e1222 010.0000123456</span> this is a combination of Device part number and serial code. You can use Tachograph lookup ([https://tacholookup.teltonika.lt/ Tachograph Lookup]) to check if tachograph is supported - enter the combination without e1-222 part and dots: E4T0100100000123456
-This information can be found on the tachograph label as well:<br />
-[[Image:INTELLIC 2.png|600px|center]]
 ==Connecting to tachograph==

Latest revision as of 16:03, 18 May 2026