Difference between revisions of "Template:FM36YX SMS events"

From Wiki Knowledge Base | Teltonika GPS
m
(18 intermediate revisions by one other user not shown)
Line 1: Line 1:
 
SMS events functionality allows {{{model|FM36YX}}} to send a configured SMS when an event is
 
SMS events functionality allows {{{model|FM36YX}}} to send a configured SMS when an event is
 
triggered. This event can be triggered by:<br />
 
triggered. This event can be triggered by:<br />
 +
* Green Driving;
 +
* OverSpeeding;
 +
* Authorized Driving;
 +
* Immobilizer;
 +
* Trip start/stop;
 +
* Geofence;
 +
* AutoGeofence;
 +
* I/O event.
 +
 
* [[{{{model|FM36YX}}}_Features_settings#Green_Driving|Green Driving]]
 
* [[{{{model|FM36YX}}}_Features_settings#Green_Driving|Green Driving]]
* [[{{{model|FM36YX}}}_Features_settings#Over_Speeding|Over Speeding]]
+
* [[{{{model|FM36YX}}}_Features_settings#Scenarios_settings|Over Speeding]]
 +
* [[{{{model|FM36YX}}}_Features_settings#Excessive_Idling_Detection|Excessive Idling Detection]]
 +
* [[{{{model|FM36YX}}}_Features_settings#Jamming_detection|Jamming detection]]
 
* [[{{{model|FM36YX}}}_Features_settings#Authorized_driving|Authorized driving]]
 
* [[{{{model|FM36YX}}}_Features_settings#Authorized_driving|Authorized driving]]
 
* [[{{{model|FM36YX}}}_Features_settings#Immobilizer|Immobilizer]]
 
* [[{{{model|FM36YX}}}_Features_settings#Immobilizer|Immobilizer]]
* [[{{{model|FM36YX}}}_Features_settings#Trip|Trip start/stop]]
 
* [[{{{model|FM36YX}}}_Features_settings#Geofence|Geofence]]
 
* [[{{{model|FM36YX}}}_Features_settings#Autogeofence|Autogeofence]]
 
* [[{{{model|FM36YX}}}_I/O_settings|I/O event]]
 
  
 
When any of the above events is triggered, {{{model|FM36YX}}} sends a configured SMS message to a
 
When any of the above events is triggered, {{{model|FM36YX}}} sends a configured SMS message to a
Line 19: Line 26:
 
''“Date Time EventText”''
 
''“Date Time EventText”''
  
For example, if {{{model|FM36YX}}} is configured to send an SMS (figure below "SMS Events" section), when Digital Input 1 reaches
+
For example, if {{{model|FM36YX}}} is configured to send an SMS (figure 36), when Digital Input 1 reaches
High level, with priority High and configured to generate event on both range enter and exit(figure below "IO" section), then the sent SMS is:<br />
+
High level, with priority High and configured to generate event on both range enter and exit
 +
(figure37), then the sent SMS is:<br />
 
''“2016/1/20 12:00:00 Digital Input 1”''
 
''“2016/1/20 12:00:00 Digital Input 1”''
  
[[File:FM36YX SMS event DIN1.png]]
+
'''FIGURE'''
 +
 
 +
'''FIGURE'''
  
 
The SMS Text field can be altered and any text can be entered. Maximum message length is 90
 
The SMS Text field can be altered and any text can be entered. Maximum message length is 90
Line 35: Line 45:
 
|}
 
|}
  
===Configuration===
+
''' ''Configuration'' '''
----
 
'''Scenarios'''
 
 
 
To configure SMS events for scenarios, open Scenarios window and Enable desired scenario.
 
Then go to GSM ->SMS -> SMS events window and activate SMS event for Enabled scenario.
 
Figure below shows how to enable Green Driving and Immobilizer SMS Events.
 
 
 
[[File:FM36YX_SMS_event_Scenarios.png]]
 
 
 
When any of the scenarios events occurs, a text message will be sent to the predefined number.
 
 
 
'''TRIP'''
 
 
 
In order to configure Trip SMS events click on Trip window and Enable Trip feature (figure below).
 
Then go to GSM -> SMS -> SMS Events settings and Enable Trip SMS event. After enabling SMS
 
Events (figure below), trip event will be triggered and message sent, when Trip starts (GNSS speed
 
exceeds the speed in Start Speed (ex. 5 km/h) and when Trip stops, that is ignition is turned off
 
longer then the time written in Ignition Off Timeout (ex. 60 seconds).
 
 
 
[[File:FM36YX_SMS_event_TRIP.png]]
 
 
 
'''Geofence'''
 
 
 
Geofence SMS event is triggered and message sent when the device exits and/or enters a
 
configured Geofence zone. The Geofence zone must be configured to generate an event On Exit,
 
On Enter or On Both (figure below). If No Event is selected, then it is not possible to turn on SMS
 
events. If several zones are created then SMS events can be turned on separately for each zone
 
entering different text message.
 
 
 
[[File:FM36YX_SMS_event_Geofence.png]]
 
 
 
'''AutoGeofence'''
 
 
 
SMS events for AutoGeofence are configured the same as in Geofence. AutoGeofence is in
 
Features -> Auto geofencing, for SMS events configuration, go to GSM -> SMS -> SMS
 
Events (figure below).
 
 
 
[[File:FM36YX_SMS_event_AutoGeofence.png]]
 
 
 
'''I/O events'''
 
 
 
{{{model|FM36YX}}} sends SMS event message when a configured I/O property enters and/or exits its
 
configured High/Low boundaries or Hysteresis event generation is chosen (Monitoring does not
 
generate event, so SMS event could not be configured). Every IO element SMS event can be
 
configured to send individual message to different numbers.
 
 
 
[[File:FM36YX_SMS_event_I-O_events.png]]
 

Revision as of 10:01, 1 June 2018

SMS events functionality allows FM36YX to send a configured SMS when an event is triggered. This event can be triggered by:

  • Green Driving;
  • OverSpeeding;
  • Authorized Driving;
  • Immobilizer;
  • Trip start/stop;
  • Geofence;
  • AutoGeofence;
  • I/O event.

When any of the above events is triggered, FM36YX sends a configured SMS message to a defined phone number. If SMS events is activated, but there are no numbers defined in SMS events PreDefined Numbers list (figure below), then the device will not send any messages.

FM36YX Predefined list.png

The sent SMS messages format is according to:
“Date Time EventText”

For example, if FM36YX is configured to send an SMS (figure 36), when Digital Input 1 reaches High level, with priority High and configured to generate event on both range enter and exit (figure37), then the sent SMS is:
“2016/1/20 12:00:00 Digital Input 1”

FIGURE

FIGURE

The SMS Text field can be altered and any text can be entered. Maximum message length is 90 symbols (numbers, letters and symbols in ASCII, except for comma “,”).

Bw nb.png ATTENTION! If FM36YX is in Deep Sleep mode and SMS event occurs with LOW priority (which does not wake up FM36YX), then the device does not send the message. It is saved in device memory until it wakes up from Deep Sleep mode and GSM modem starts working normally. After it wakes up, all the messages that are saved in memory will be sent, but keep in mind that only 10 messages can be saved in memory – all other messages will not be saved, until there is room in device memory.

Configuration